ge measur ement & contr ol npc-100 and NPC-120 series novasensor disposable medical pressure sensors features ? solid state, high reliability ? media compatibility ? high performance ? factory flled with dielectric gel ? small size ? fully tested ? temperature compensated ? low cost disposable design ? designed to aami specifcations applications ? medical instrumentation ? blood pressure measurement ? infusion pumps ? kidney dialysis machines pdf create 8 trial www.nuance.com http://
p aramet er v alue units not es general pr essur e ranges C30 to 300 mmhg C0.58 psi to 5.8 psi o v erpr essur e 125 psi minimum electrical @ 72f (22c ) unless other wise s tat ed input excitation 1 to 10 vdc calibrated for 6 vdc dielectric breakdown 10,000 vdc 5 risk curr ent 2 a maximum (per aami), 5 input impedance 1800 to 3300 output impedance 285 to 315 envir onmental t emperatur e compensated 15c to 40c c (59 to 104f) operating 15c to 40c c (59 to 104f) s torage C25c to 70c c (C13 to 158f) humidity 10 to 90 % light sensitivity 1 mmhg maximum (per aami bp22) operating pr oduct life 168 hour s shelf life 3 y ear s mechanical weight <0.0044 lb (<2 g) media inter face medical grade, dielectric gel gel t ube inter face material p oly carbonate p aramet er units minimum type maximum notes p er formance p aramet er s* ofset mmhg C25 0 25 sensitivity v/v/mmhg 4.95 5 5.05 calibration mmhg 97.5 100 102.5 2 s ymmetr y % 5 linearity (C30 to 100 mmhg) mmhg 1 6 linearity (100 to 200 mmhg) % output 1 6 linearity (200 to 300 mmhg) % output 1.5 6 thermal coefcient ofset mmhg/c 0.3 3 thermal coefcient span %/c 0.1 3 fr equency r esponse hz 1200 5 phase shift degr ees 5 5 ofset drift mmhg/8 hr s 1 4,5 * 1. all v alues measur ed at 6 vdc and 71.6f (22c ) and af t er fv e second w arm up unless other wise specifed . 2. output of sensor with no pr essur e applied and a 150 k w r esist or shor t ed acr oss +in t o +out . 3. ov er a t emperatur e range of 59f t o 104f (15c t o 40c ). 4. normalized ofset/bridge v oltage8 hour s af t er 20 seconds . w arm-up . 5. pr eviously qualifed , not t est ed in pr oduction. 6. deviation fr om straight line drawn thr ough zer o and 100 mmhg data points . 7. these sensor s ar e compatible with e t o (ethylene o xide) st erilization. the user is r esponsible for establishing and v alidating suitable pr ocess conditions t o pr ev ent damage t o the sensor . npc-100 and NPC-120 series specifcations the novasensor npc-100 and NPC-120 series pressure sensor are specifcally designed for use in disposable medical applications. the devices are compensated and calibrated per the association for the advancement of medical instrumentation (aami) guidelines for industry acceptability. the sensors integrate a high-performance, pressure sensor die with temperature compensation circuitry and gel protection in a small, low-cost package. the npc-100 and NPC-120 series are manufactured in a class 1000 clean-room to minimize possible sources of contamination. a specially designed silicon micromachined sensing element is used to meet or exceed all industry requirements while minimizing assembly and test cost for maximum customer value. thick-flm laser-trimming is employed for fnal compensation and calibration. sensitivity is maintained to 1% and linearity is better than 1% in the physiological operating pressure range. the npc-100 and NPC-120 series are batch- manufactured in ceramic plate form and shipped as an intact array or in tape and reel for easy customer automation. this assembly method draws from well-established manufacturing techniques used in the electronics industry in order to produce a quality, high volume product. np c-100 s eries pr essur e sensor por t int er face npc-100 series package diagram 0.160 in to 0.170 in (4.06 mm to 4.32 mm) 0.320 in +0.010/-0.002 (8.13 mm +0.25/-0.05) 0.010 in (0.25 mm) 0.017 in (0.43 mm) 0.415 in +0.010/-0.002 (10.54 mm +0.25/-0.05) 0.109 in to 0.119 in (2.77 mm to 3.02 mm) gel height +0.001 in/-0.035 in (+0.025 mm/-0.89 mm) pr essur e por t dielectric gel v ent hole p oly carbonate gel tube2 contact pads 1 1 1. tolerances refect typical faring during the singulation process. np c-120 s eries pr essur e sensor por t int er face ? 0. 236 i n t o 0. 246 i n (5 . 99 mm t o 6. 25 mm ) 0. 285 i n t o 0. 289 i n (7. 24 mm t o 7. 34 mm ) 0. 142 i n t o 0. 145 i n (3. 61 mm t o 3. 68 mm ) rad i u s 0. 005 i n (0. 13 mm ) m a xi m u m 0. 049 i n t o 0. 052 i n (1. 24 mm t o 1. 32 mm) 0. 393 i n t o 0. 397 i n ( 9.98 mm t o 10.08 mm ) 0. 189 i n t o 0. 192 i n (4. 80 mm t o 4. 88 mm ) m at er ial is clea r polyca rbonat e. ( 2. 22 mm t o 2 . 30 mm ) 0. 0875 i n t o 0. 0905 i n 0. 049 i n t o 0. 052 i n (1. 24 mm t o 1. 32 mm ) 0. 392 i n t o 0. 397 i n (9.96 mm t o 10.08 mm ) 0. 124 i n t o 0. 126 i n (3. 14 mm t o 3. 20 mm ) rad i u s 0. 005 i n (0. 13 mm ) m axi m u m 0. 236 i n t o 0. 246 i n (5. 99 mm t o 6. 25 mm ) 0. 285 i n t o 0. 289 i n (7. 24 mm t o 7. 34 mm ) 0. 142 i n t o 0. 145 i n (3. 61 mm t o 3. 68 mm ) m at er ial is cle a r polyca rbonat e. 0. 0875 i n t o 0. 0905 i n (2. 22 mm t o 2. 30 mm ) pdf create 8 trial www.nuance.com
npc-100 series electrical interface 1. t olerance on electrical pad location is 0.010 in (0.25 mm). 2. contact pads ar e suitable for soldering . 3. split pads on +out and Cout must be connect ed for pr oper operation. 4. all dimensions assume a nominal 0.01 in (0.25 mm) distance betw een the edge of the solder pads t o the edge of the ceramic . this distance will v ar y pinout 1 +in 2 +out 3 -out 4 -in 0.000 in (0 mm) 0.058 in (1.47 mm) 0.097 in (2.46 mm) 0.119 in (3.02 mm) 0.262 in (6.65 mm) .069 in (1.75 mm) 0.000 in (0 mm) 4.35 in (110.5 mm) 0 in (0 mm) 0 in (0 mm) 4.35 in (110.5 mm) 1. s ensor s ar e shipped as 120 up snapstrat es that must be singulat ed by the c ust omer . 2. each r eel or plat e may include units that hav e failed visual or electrical paramet er s as w ell as good units . bad units ar e identifed with a dot on the backside of the cell location. 3. r eels and plat es ar e shipped in dust fr ee anti-static container s t o pr ev ent contamination of the gel sur face. np c-100 s eries shipping confguration ordering information the code number t o be or der ed may be specifed as follows: np c-100 np c-120 code blank : sold in 120-up snapstrat e t t ape and r eel np c-1 0 - ___ typical model number npc-100 series schematic diagram -out +out +in -in 1 2 3 4 0.152 in (3.86 mm) 0.168 in (4.27 mm) 0.201 in (5.10 mm) 0.223 in (5.66 mm) pdf create 8 trial www.nuance.com
920-302c ? 2013 general electric company. all rights reserved. specifcations are subject to change without notice. ge is a registered trademark of general electric company. other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not afliated with ge. w w w .g e - m c s . c o m pdf create 8 trial www.nuance.com
|
