4.04 [102.6] 5.41 [137,4] 2.49 [63,2] ? 2.49 [63,2] 30o 1.25 [31,8] 2.63 [66,8] 0.38 [9,7] 1.00 [25,4] 0.92 [23,4] 0.250 [6,35] ? .2497 in. +.0000 -.0003 .25-inch shaft option ? 5.995 mm +.000 -.025 6mm shaft option 1 2 reference mark: full counter-clockwise position - align mark on shaft to mark on face for start of measurement range 1 2 2 shaft detail all dimensions are in inches [mm] mounting holes: for .25 in. shaft option , mounting holes are threaded #10-32 x 0.375 deep 120 apart on a 2.00 inch dia. bc for 6mm shaft option , mounting holes are threaded m6 x 9 mm deep 120o apart on a 50,8 mm dia. bc output signal (vdc) full stroke range 0...10 vdc 0...5 vdc 2 signal options: RT8510 | 23 celesco.com s info@celesco.com tel: 800.423.5483 s +1.818.701.2750 s fax: +1.818.701.2799 celesco transducer products, inc. 20630 plummer street s chatsworth, ca 91311 rotational position transducer rt8 510 0...5, 0...10 vdc output ranges: 0-45o to 0-200 turns industrial grade speci?cation summary: outline drawing output signal general full stroke range options .................................. 0-0.125 to 0-200 turns output signal options ............................................ 0...5, 0...10 vdc accuracy.................................................. see ordering information repeatability.................................................. 0.05% full stroke resolution .................................................... essentially infinite enclosure material................... powder-painted aluminum or stainless steel sensor .................................... plastic-hybrid precision potentiometer potentiometer cycle life .................................. see ordering information shaft loading .................................. up to 10 lbs. radial and 5 lbs. axial starting torque (25oc)............................................ 2.0 in-oz., max. weight, aluminum (stainless steel) enclosure ................... 3 lbs. (6 lbs.) max. electrical input ............................. 14.5-40 vdc (10.5-40 vdc for 0...5 volt output) input current................................................... 10 ma maximum output impedence ................................................... 1000 ohms maximum load ...................................................... 5000 ohms zero adjustment ................. from factory set zero to 50% of full stroke range span adjustment...................................... to 50% of factory set span environmental enclosure ................................................. nema 4/4x/6, ip 67/68 operating temperature ............................... -40 to 200f (-40 to 90c) vibration....................................... up to 10 gs to 2000 hz maximum emc complience per directive 89/336/eec emission/immunity....................................... en50081-2 / en50082-2 the RT8510 can operate from an unregulated 14.5 to 40 vdc power supply while providing a regulated output signal over its full range from 1/8 of a turn up to 200 turns. it provides a 0 - 10 vdc position feedback signal proportional to the rotational posi- tion of the shaft as a member of celescos innovative family of nema- 4/ ip67 rotational transducers, the RT8510 offers nu- merous benefits including a zero and span adjust and a potentiometric sensor which provides an ab- solute feedback signal that is unaffected by power loss.
rt8 510 - - - 1 0 order code: r a b c d e f g r a b c e f sample model number: RT8510 - 0005 - 111 - 1110 range: 5 turns (clockwise shaft rotations) enclosure: aluminum shaft diameter: .25 inches mounting style: face mount output signal: 0...10 vdc signal increasing clockwise electrical connection: 6-pin plastic connector r r order code: clockwise shaft rotations, min: accuracy (% of f.s.): potentiometer cycle life*: r125 0r25 0r50 0001 0002 0003 0005 0010 0020 0.125 0.25 0.50 1 2 3 5 10 20 1.25% 1.25% 0.5% 0.5% 0.5% 0.2% 0.2% 0.15% 0.15% 2.5 x 10 6 2.5 x 10 6 2.5 x 10 6 2.5 x 10 6 2.5 x 10 6 5 x 10 5 5 x 10 5 2.5 x 10 5 2.5 x 10 5 order code: clockwise shaft rotations, min: accuracy (% of f.s.): potentiometer cycle life*: 0030 0040 0050 0080 0100 0120 0140 0180 0200 30 40 50 80 100 120 140 180 200 0.15% 0.15% 0.15% 0.15% 0.15% 0.15% 0.15% 0.15% 0.15% 2.5 x 10 5 2.5 x 10 5 2.5 x 10 5 2.5 x 10 5 2.5 x 10 5 2.5 x 10 5 2.5 x 10 5 2.5 x 10 5 2.5 x 10 5 *Cnumber of times the sensor shaft can be cycled back and forth from beginning to end and back to the beginning before any meas urable signal degradation may occur. powder-painted aluminum 303 stainless steel order code: a 12 order code: b 1234 0.25-in. diameter 0.25-in. dia. w/flats 6 mm diameter 6 mm dia. w/flats 0.025 in. 0.33 in. 5.995 mm (+.000 C.025) .2497 in. (+.0000 C.0003) 0.64 mm 8.4 mm c order code: face mount flange mount 12 1.00 [25,4] .28 [7,1] wide mounting slot on a ?3.50 [88,9] bc ? 4.1 [104.14] in [mm] 1.38 [35,1] 30o .25 in. shaft option #10-32 x 0.375 inch deep mounting holes spaced 120o apart on 2.00 [50,8] bc 6mm shaft option threaded m6 x 9 mm deep 24 | RT8510 celesco.com s info@celesco.com tel: 800.423.5483 s +1.818.701.2750 s fax: +1.818.701.2799 ordering information: model number: full stroke range: enclosure material: 2 4 s 2 o t a t i o n a l 4 r a n s d u c e r 6 $ # / u t p u t 3 i g n a l shaft diameter: mounting style:
max ccw ccw cw ccw cw ccw cw ccw cw max cw e 0...10 vdc 10...0 vdc 0...5 vdc 5...0 vdc 5 0 10 0 10 0 5 0 1 2 3 4 order code: ordercode = 1 = 0...10 vdc = 0 vdc = 10 vdc example: output signal options: 10.5...40 vdc 14.5...40 vdc input voltage: { contact view a b c d e f 25 ft. x 0.2-in. dia. [7,5 m x 5 mm dia.] 24 awg, shielded 1/2 - 5/16" [14 - 8 mm] cable dia. 16 awg max conductor size connector: ms3102e-14s-6p mating plug: ms3106e-14s-6s 3.0 in. [78 mm] 10 ft. x 0.4-in. dia. [3 m x 10 mm dia.] 18 awg, type sjtw 100 ft. x 0.4-in. dia. [30 m x 10 mm dia.] 18 awg, type sjtw 10 ft. x 0.4-in. dia. [3 m x 10 mm dia.] 18 awg, type sjtw 100 ft. x 0.4-in. dia. [30 m x 10 mm dia.] 18 awg, type sjtw 2.4 in. [60 mm] 3/8-in. [9 mm] max cable dia. 16 awg max conductor size connector: ms3102e-14s-6p mating plug: ms3106e-14s-6s color code signal white input voltage green output signal black common color code signal red input voltage green output signal black common pin signal a input voltage b output signal c common notes: * Ctest pressure: 100 feet [30 meters] h 2 o (40 psid); test medium: air; duration: 2 hours. ** Cnema 4x applies to stainless steel enclosure only. { f 6-pin plastic connector w/mating plug 10-ft. [3 m] pressure tested* waterproof cable 100-ft. [30 m] pressure tested* waterproof cable 6-pin mating plug waterproof cable instrumentation cable ip 67, nema 4x**,6 ip 65, nema 4 ip 67, nema 6 10-ft. [3 m] waterproof cable 100-ft. [30 m] waterproof cable 6-pin metal connector w/mating plug 25-ft. [7.5 m] instrumentation cable ip 67, nema 4x**, 6 ip 67, nema 4x**,6 ip 68, nema 4x**, 6p ip 68, nema 4x**, 6p order code: f order code: 1 2 3 4 5 6 7 RT8510 | 25 celesco.com s info@celesco.com tel: 800.423.5483 s +1.818.701.2750 s fax: +1.818.701.2799 output signals: electrical connection: ordering information: 2 4 s 2 o t a t i o n a l 4 r a n s d u c e r 6 $ # / u t p u t 3 i g n a l
26 | RT8510 celesco.com s info@celesco.com tel: 800.423.5483 s +1.818.701.2750 s fax: +1.818.701.2799 123456 the output signal direction can be reversed at any time by simply changing the dip-switch settings found on the internal signal board. after the settings have been changed, adjustment of the zero and span trimpots will be required to precisely match signal value s to the beginning and end points of the stroke. dip-switch location 123456 123456 123456 123456 0...10 vdc 10...0 vdc 0...5 vdc 5...0 vdc output signal switch setting signal board internal dip switches & signal board to gain access to the signal board, remove four allen-head screws and seperate the two case halves. output signal selection: 2 4 s 2 o t a t i o n a l 4 r a n s d u c e r 6 $ # / u t p u t 3 i g n a l version: 7.0 last updated: july 20, 2010
|
