statek corporation 512 n. main st., orange, ca 92868 714-639-7810 fax: 714-997-1256 www.statek.com 10206 rev d description the CX17sm is a miniature, low profile, surface-mount at quartz crystal that is ideal for many applications. features small footprint (4.8 mm x 3.0 mm typical) low profile (0.90 mm typical) designed for surface-mount applications high shock and vibration resistance custom designs available full military testing available designed and manufactured in the usa applications medical medical telemetry industrial, computer, & communications instrumentation handheld devices military & aerospace communications smart munitions surveillance devices projectile telemetry CX17sm at crystal 12 mhz to 200 mhz package dimensions dimension minimum typical maximum mm mm mm a4.704.804.90 b2.903.003.10 c see below d0.800.901.00 thickness (dim c) lid termination minimum typical maximum mm mm mm sm1 0.80 0.90 1.00 sm2/sm4 0.82 0.92 1.02 sm3/sm5 0.83 0.94 1.05 package dimensions glass ultra-miniature, ultra-low profile surface mount at quartz crystal
how to order CX17sm at crystals CX17 s sm1 20.0m , 100 / 100 / ? / i statek corporation 512 n. main st., orange, ca 92868 714-639-7810 fax: 714-997-1256 www.statek.com terminations designation termination sm1 gold plated (lead free) sm2 solder plated sm3 solder dipped sm4 solder plated (lead free) sm5 solder dipped (lead free) packaging options ? tray pack specifications specifications are typical at 25 o c unless otherwise noted. specifications are subject to change without notice. fundamental frequency 12 mhz 20 mhz 32 mhz motional resistance r 1 ( )35 15 10 motional capacitance c 1 (ff) 2.8 4.2 5.4 quality factor q (k) 130 120 90 shunt capacitance c 0 (pf) 1.1 1.2 1.5 calibration tolerance 1 ?00 ppm, or tighter as required load capacitance 2 10 pf drive level 3 50 w nominal, 500 w max frequency-temperature ?0 ppm to ?0 ppm (commercial) stability 1,4 ?00 ppm to ?0 ppm (industrial) ?00 ppm to ?0 ppm (military) aging, first year 5 5 ppm max (better than 1 ppm available) shock, survival 6 5,000 g, 0.3 ms, 1 / 2 sine vibration, survival 7 20 g, 10-2,000 hz swept sine operating temp. range -10 o c to +70 o c (commercial) -40 o c to +85 o c (industrial) -55 o c to +125 o c (military) storage temp. range -55 o c to +125 o c max process temperature 260 o c for 20 s 1. other tolerances available. contact factory. 2. unless specified otherwise. 3. crystals are characterized and tested at 50 w, unless specified otherwise. operation at higher drive levels can result in sub-optimal behavior. 4. does not include calibration tolerance. the characteristics of the frequency stability over temperature follow that of the at thickness-shear mode. 5. 5 ppm max for frequencies 50 mhz and lower. for tighter tolerances and higher frequencies contact factory. 6. higher shock version available. 7. per mil-std-202g, method 204d, condition d. random vibration testing also available. blank = standard s = special or custom blank = glass lid sm1 = gold plated (lead free) sm2 = solder plated sm3 = solder dipped sm4 = solder plated (lead free) sm5 = solder dipped (lead free) frequency m = mhz calibration tolerance @ 25 o c (in ppm) frequency stability over temp. range (in ppm) operating temp. range: c=-10 o c to +70 o c i =-40 o c to +85 o c m=-55 o c to +125 o c s=customer specified total frequency tolerance (in ppm) operating temp. range: c=-10 o c to +70 o c i =-40 o c to +85 o c m=-55 o c to +125 o c s=customer specified or equivalent circuit r 1 motional resistance l 1 motional inductance c 1 motional capacitance c 0 shunt capacitance ? /200/ i suggested land pattern 10206 rev d
|