cystech electronics corp. spec. no. : c300sh issued date : 2012.07.27 revised date page no. : 1/5 CSOD120LSH cystek product specification 1.0amp. surface mount schottky barrier diodes CSOD120LSH features ? for surface mounted applications. ? for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ? plastic material used carries underwriters laboratory flammability classification 94v-0 ? low leakage current ? high surge capability ? high temperature soldering: 250 c/10 seconds at terminals ? exceeds environmental standards of mil-s-19500/228 ? rohs compliant package mechanical data ? case: molded plastic, jedec sod-123. ? terminals: pure tin plated, solderable per mil-std-202 method 208 ? polarity: indicated by cathode band. ? weight: 0.04 gram approximately maximum ratings and electrical characteristics ( rating at 25 c ambient temperature unless otherwise specified.) parameter symbol limits units repetitive peak reverse voltage v rrm 20 v maximum rms voltage v rms 14 v maximum dc blocking voltage v r 20 v maximum instantaneous forward voltage, i f =1a (note 1) v f 0.45 v average forward rectified current i o 1 a peak forward surge current @8.3ms single half sine wave superimposed on rated load (jedec method) i fsm 10 a maximum dc reverse current v r =v rrm ,t j =25 (note 1) v r =v rrm ,t j =100 (note 1) i r 0.3 10 ma ma maximum thermal resistance, junction to ambient r th,ja 250(typ) /w diode junction capacitance @ f=1mhz and applied 5v reverse voltage c d 35 (typ) pf storage temperature range tstg -65 ~ +150 operating temperature range t j -50 ~ +100 notes : 1.pulse test, pulse width=300 sec, 2% duty cycle
cystech electronics corp. spec. no. : c300sh issued date : 2012.07.27 revised date page no. : 2/5 CSOD120LSH cystek product specification characteristic curves fig. 1 forward current derating curve 0 0.2 0.4 0.6 0.8 1 1.2 0 25 50 75 100 125 150 case temperature---t c () average forward current---io(a) resistive or inductive load 0.375"(9.5mm) lead length fig 2. forward characteristics 10 100 1000 10000 0 0.2 0.4 0.6 0.8 1 forward voltage---v f (v) instantaneous forward current---if(ma) pulse width=300s, 1% duty cycle 100c, 75c, 25c, 0c, -40c fig. 3 typical junction capacitance 10 100 1000 0.1 1 10 100 reverse voltage---v r (v) junction capacitance---c j (pf) tj=25, f=1.0mhz vsig=50mvp-p fig. 4 typical reverse characteristics 1 10 100 1000 10000 0 5 10 15 20 reverse voltage---v r (v) reverse leakage current---i r (a) tj=75 tj=25 tj=100 tj=0c
cystech electronics corp. spec. no. : c300sh issued date : 2012.07.27 revised date page no. : 3/5 CSOD120LSH cystek product specification reel dimension carrier tape dimension
cystech electronics corp. spec. no. : c300sh issued date : 2012.07.27 revised date page no. : 4/5 CSOD120LSH cystek product specification recommended wave soldering condition product peak temperature soldering time pb-free devices 260 +0/-5 c 5 +1/-1 seconds recommended temperature profile for ir reflow profile feature sn-pb eutectic assembly pb-free assembly average ramp-up rate (tsmax to tp) 3 c/second max. 3 c/second max. preheat ? temperature min(t s min) ? temperature max(t s max) ? time(ts min to ts max ) 100 c 150 c 60-120 seconds 150 c 200 c 60-180 seconds time maintained above: ? temperature (t l ) ? time (t l ) 183 c 60-150 seconds 217 c 60-150 seconds peak temperature(t p ) 240 +0/-5 c 260 +0/-5 c time within 5 c of actual peak temperature(tp) 10-30 seconds 20-40 seconds ramp down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note : all temperatures refer to topside of t he package, measured on the package body surface.
cystech electronics corp. spec. no. : c300sh issued date : 2012.07.27 revised date page no. : 5/5 CSOD120LSH cystek product specification sod-123 dimension style: pin 1.cathode 2.anode 2-lead sod-123 plastic surface mounted package cystek package code: sh marking: sj 12 millimeters inches millimeters inches dim min. max. min. max. dim min. max. min. max. a 1.050 1.250 0.041 0.049 e 2.600 2.800 0.102 0.110 a1 0.000 0.100 0.000 0.004 e1 3.550 3.850 0.140 0.152 a2 1.050 1.115 0.041 0.045 l 0.500 ref 0.020 ref b 0.450 0.650 0.018 0.026 l1 0.250 0.450 0.010 0.018 c 0.080 0.150 0.003 0.006 0 c 8 c 0 c 8 c d 1.500 1.700 0.059 0.067 notes: 1.controlling dimension : millimeters. 2.lead thickness specified per l/f drawing with solder plating. 3.if there is any question with pa cking specification or packing me thod, please contact your local cystek sales office. material: ? lead: pure tin plated. ? mold compound: epoxy resin family, flammability solid burning class: ul94v-0. important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of cystek. ? cystek reserves the right to make changes to its products without notice. ? cystek semiconductor products are not warranted to be suitable for use in life-support applications, or systems. ? cystek assumes no liability for any consequence of customer pr oduct design, infringement of pat ents, or application assistance .
|