C12496-046 easy-to-use detector module with built-in preamp infrared detector module with preamp www.hamamatsu.com 1 the C12496-046 is an ampli er-integrated module that can detect infrared light simply by connecting a dc power supply. it is suitable for detecting co 2 lasers. the C12496-046 can also be customized to suit your application. co 2 laser detection infrared detection 4-conductor cable for room-temperature types (for dc power supply) a4372-02: 2 m (connector installed at one end) instruction manual features applications accessories compact size easy to use operates just by connecting to dc power supply circuit design optimized for detector characteristics structure absolute maximum ratings parameter symbol speci cation unit detector - photon drag detector (b749) - photosensitive area - 4.6 mm parameter symbol condition value unit supply voltage vcc 18 v incident light level - cw light 1 w/cm 2 pulsed light * 10 mw/cm 2 operating temperature topr 0 to +40 c storage temperature tstg -20 to +50 c * not to exceed 1j/cm 2 note: exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. always be sure to use the product within the absolute maximum ratings.
infrared detector module with preamp C12496-046 2 electrical and optical characteristics (ta=25 c, vcc=15 v) parameter symbol condition min. typ. max. unit element temperature td - 25 - c p eak sensitivit y wavelength p - 10.6 - m photosensitivity s = p 1.0 10 -2 1.3 10 -2 - v/w noise equivalent power nep = p - 3.0 10 -12 7.5 10 -2 w/hz 1/2 frequency response* 1 fcl -3 db -50-hz fch 450 500 - khz output impedance zo - 50 - maximum output voltage - r l =1 k 12 13 - v supply voltage * 2 vcc 14.5 15.0 15.5 v current consumption - vcc= 15 v - 15 30 ma *1: ampli er only * 2: recommended dc power supply (analog power supply): 15 v current capacity: more than 1.5 times the maximum current consumption ripple noise: 5 mvp-p or less 20 0.2 20 0.2 7 107.5 ( 4 ) m3 depth 2 32 24 0.2 3.1 0.5 photosensitive surface threaded hole (5 ) m3 depth 5 4-pin connector (voltage input) bnc connector (signal output) 18.2 15 15 25 60 36.5 13.2 0.5 33.5 window 4.6 0.2 lead color pin no. pin connection plug tolerance unless otherwise noted: 1 vcc=+15 v white gnd black/white/blue stranded wire gnd vcc=-15 v blue kirda2031ea dimensional outline (unit: mm)
cat. no. kird1126e01 feb. 2014 dn www.hamamatsu.com hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184 u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 8152-375-0, fax: (49) 8152-265-8 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, telephone: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, united kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: thorshamnsgatan 35 16440 kista, sweden, telephone: (46) 8-509-031-00, fax: (46) 8- 509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1 int. 6, 20020 arese, (milano), italy, telephone: (39) 02-935-81-733, fax: (39) 02-935-81-741 china: hamamatsu photonics (china) co., ltd.: 1201 tower b, jiaming center, no.27 dongsanhuan beilu, chaoyang district, beijing 100020, china, telephone: (86) 10-6586-6006, fax: (86) 10-6586-2866 product specifications are subject to change without prior notice due to improvements or other reasons. this document has been carefully prepared and the information contained is believed to be accurate. in rare cases, however, there may be inaccuracies such as text errors. before using these products, always contact us for the delivery specification sheet to check the latest specifications. t ype numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(x)" which means preliminary specifications or a suffix "(z)" which means developmental specifications. t he product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. however, even if within the warranty period we accept absolutely no liability for any loss caused by natural d isasters or improper product use. copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. information described in this material is current as of february, 2014. 3 infrared detector module with preamp C12496-046 cable a4372-02 kirda0196ee 2000 100 27 70 10 10 3 solder processing connector: hr10-7p-4p (made by hirose electric) connector end shielded wire (4 conductors) 11 4.8 1.1 pin connection pin no. +15 v lead color white gnd black/white/blue stranded wire gnd -15 v blue tolerance unless otherwise noted: 1 precautions always use a dual-polarity (15 v) power supply to operate this detector. never use a single-polarity (+15 v or -15 v only) pow er supply. using a single-polarity power supply may cause the ampli er in the detector module to break down. be careful not to apply excessive force to the detector surface. applying excessive force may damage the light input window. do not directly touch the light input window with bare hands. if dust or dirt gets on the window, wipe it gently using ethyl alcohol. do not drop this product or do not apply excessive shock to it. related information ? notice technical information ? infrared detectors/technical information precautions http://www.hamamatsu.com/sp/ssd/doc_en.html
|
