digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mcr2150(a) series silicon controlled rectifiers available non-rohs (standard) or rohs compliant (add pbf suffix). available as ?hr? (high reliability) screened per mil-prf- 19500, jantx level. add ?hr? suffix to base part number. maximum ratings rating symbol value unit repetitive peak off-state voltage (1) peak repetitive reverse voltage mcr2150(a)-4 mcr2150(a)-5 mcr2150(a)-6 mcr2150(a)-7 mcr2150(a)-8 mcr2150(a)-9 mcr2150(a)-10 v rrm v drm 200 300 400 500 600 700 800 volts forward current rms (all conduction angles) i t(rms) 15 amps peak forward surge current (1/2 cycle, sine wave, 60 hz) i tsm 160 amps circuit fusing considerations (t = 8.3ms) i 2 t 100 a 2 s forward peak gate power p gm 5.0 watts forward average gate power p g(av) 0.5 watts forward peak gate current i gm 2.0 amps operating junction temperature range t j -40 to +125 c storage temperature range t stg -40 to +150 c note 1: v rrm for all types can be applied on a continuous dc basis without incurring damage. ratings apply for zero or negative gate voltag e. devices should not be tested for blocking capability in a manner such that the voltage supplied exceeds the rated blocking voltage. thermal characteristics characteristic symbol maximum unit thermal resistance, junction to case r ? jc 1.5 c/w electrical characteristics (t j = 25c unless otherwise noted) characteristic symbol min typ. max unit peak forward blocking current (rated v drm @ t j = 125c) i drm - - 3.0 ma peak reverse blocking current (rated v rrm @ t j = 125c) i rrm - - 3.0 ma peak on-state voltage (2) (i tm = 10a peak) (i tm = 30a peak) v tm - - - - 3.0 3.75 volts gate trigger current (continuous dc) (v d = 7.0v, r l = 100 ) i gt - - 50 ma gate trigger voltage (continuous dc) (v d = 7.0v, r l = 100 ) v gt - - 2.5 volts holding current (v d = 7.0v, r l = 100 ) i h - - 100 ma turn-off time (v drm = rated voltage) (i tm = 10, di/dt = 5.0a/s, reapplied dv/dt = 50v/s) mcr2150 mcr2150a t q - - 3.0 - 10 4.0 s forward voltage application rate dv/dt 100 150 - v/s note 2: pulse test: pulse width = 1.0ms, duty cycle 2%. sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130128
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mcr2150(a) series silicon controlled rectifiers mechanical characteristics case to-220ab marking alpha-numeric pin out see below to-220ab inches millimeters min max min max a 0.575 0.620 14.600 15.750 b 0.380 0.405 9.650 10.290 c 0.160 0.190 4.060 4.820 d 0.025 0.035 0.640 0.890 f 0.142 0.147 3.610 3.730 g 0.095 0.105 2.410 2.670 h 0.110 0.155 2.790 3.930 j 0.014 0.022 0.360 0.560 k 0.500 0.562 12.700 14.270 l 0.045 0.055 1.140 1.390 n 0.190 0.210 4.830 5.330 q 0.100 0.120 2.540 3.040 r 0.080 0.110 2.040 2.790 s 0.045 0.055 1.140 1.390 t 0.235 0.255 5.970 6.480 u - 0.050 - 1.270 v 0.045 - 1.140 - z - 0.080 - 2.030 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130128
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mcr2150(a) series silicon controlled rectifiers sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130128
|
