do not scale from this print .120 ref 3.05 .725 ref 18.42 .0550 1.397 .010 ref 0.25 ((no of positions / 30) x .7875[20.003]) + .005[.13] "a" "a" -lc: locking clip option shown t-1g2-01-x lc-08-tm-01 qsh-30-01-d-xx fig. 1 .245 ref 6.22 .285 7.24 ref .150 ref 3.81 .006 ref 0.15 .626 ref 15.89 ((no of positions / 30) x .7875[20.003] + "a") .036 ref 0.92 x .01965[.500] 29 eq. spaces .7875 (typ) 20.003 c3 02 01 qsh-xxx-01-x-d-xxx no of positions -030, -060, -090, *-120,* -150 (per row) row specification -d: double (use qsh-30-01-d-xx) option -a: alignment pins (use qsh-30-01-d-xx-a, see fig. 2) -lc: locking clips (use lc-08-tm-01) -gp: guide posts (use qsh-30-01-d-xx-x-gp) (see fig. 4, sheet 3) (tape & reel for -gp, 60 pos max) -k: polyimide film pad (use k-dot-.325-.450-.005, see fig. 3) -tr: tape & reel (90 pos max) -fl: friction locks (see fig. 5, sheet 3) (not available with -gp) -rt1: retention (must use -a option) (use qsh-30-01-d-xx-a-rt1 & sub-sc-05-01-ff) (see fig. 6, sheet 3) (not available with -lc, -gp, or -fl) (not available with -120 & -150 pos) plating specification -f: flash selective gold with matte tin tails (use c-126-21-f, t-1g2-01-f) (see note 8 & 10) -l: light selective gold with matte tin tails (use c-126-21-l, t-1g2-01-l) (see note 10) -h: heavy gold (use c-126-21-h, t-1g2-01-g) (see note 10) -c: electro-polished selective (use c-126-21-c, t-1g2-01-l) (see note 10) lead style -01: .1280[3.25] no of banks .1280 - .0010 + .0030 3.251 - 0.025 + 0.076 .2950 ref 7.493 .070 ref 1.77 .007 ref 0.18 see table 1 section "a"-"a" c2 c1 (see note 6 & 7) .0375 0.953 ref c c-126-21-x *see note 11 sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.3] 2 .xxx: .005[.13] .xxxx: .0020[.051] material: .5mm double row hs socket assembly by: qsh-xxx-01-x-d-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 05/21/1999 3 1 sheet scale: 1.5:1 insulator: black lcp contact & ground plane: phos bronze c:\enterprisevault\dwg\misc\mktg\qsh-xxx-01-x-d-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 notes: 1. represents a critical dimension. 2. note deleted. 3. contact retention: 8 oz. minimum. 4. ground plane retention: 8 oz. minimum. 5. burr allowance: .0015[.038] max. 6. max variance: .002[.05]. 7. dimension applies to contact & ground plane. 8. -l plating can be substituted for -f plating, -g plated ground plane can be substituted for -f plated ground plane. 9. sub-sc-05-01-xx retention to be 1.0 lbf in body. 10. may sub c-126-01 for c-126-21. 11. for new applications requiring these positions, please contact samtec interconnect processing group. revision aa
.035 ref 0.89 ((no of positions / 30) x .7875[20.003]) + .005[.13] ref -a: alignment pin option qsh-30-01-d-xx-a fig. 2 .030 ref 0.76 r "r" ref .325 8.26 .020 0.51 "s" fig. 3 -k: polyimide film pad [use k-dot-.325-.450-.005] note: "r" = ((no of positions / 30) x .7875[20.003]) + .050[1.27] with -rt1 option: "r" = ((no of positions / 30) x .7875[20.003]) + .650[16.51] ref with -gp option: "r" = ((no of positions / 30) x .7875[20.003]) + .4285[10.884] ref "s" = (("r" - .325[8.26]) / 2) .020[.51] .133 3.38 sheet of .5mm double row hs socket assembly by: qsh-xxx-01-x-d-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 05/21/1999 3 2 sheet scale: 2.5:1 revision aa c:\enterprisevault\dwg\misc\mktg\qsh-xxx-01-x-d-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
((no of pos / 30) x .7875[20.003]) + .4285[10.884] ref .102 ref 2.58 ((no of pos / 30) x .7875[20.003]) + .225[5.72] ref .140 thru ref 3.56 .221 ref 5.61 -gp: guide posts (same as fig. 1, unless otherwise stated) fig. 4 qsh-30-01-d-xx-gp "b" "b" fig. 5 -fl: friction locks (not available with -gp option) (same as fig. 1, unless otherwise stated) qsh-30-01-d-xx-fl 'a' section "b"-"b" .026 0.66 ref (typ) .080 2.03 ref (typ) detail 'a' scale 8 : 1 ((no of banks) x .7875[20.003]) + .650[16.51] ref ((no of banks) x .7875[20.003]) + .341[8.66] "d" "d" -rt1: retention option (must use -a option) (not available with -lc, -gp, or -fl options) (not available with -120 & -150 pos) (same as fig. 1, unless otherwise stated) fig. 6 qsh-30-01-d-xx-a-rt1 c4 .003 .004 .148 ref 3.76 ((no of banks) x .7875[20.003]) + .341[8.66] 'e' section "d"-"d" scale 1.5 : 1 sub-sc-05-01-ff (2 plcs) c5 .003 .004 .045 ref 1.14 .150 3.81 (see note 9) detail 'e' scale 3 : 1 c6 sheet of .5mm double row hs socket assembly by: qsh-xxx-01-x-d-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 05/21/1999 3 3 sheet scale: 1.5:1 revision aa c:\enterprisevault\dwg\misc\mktg\qsh-xxx-01-x-d-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
