53rv series ? three-phase motor reversing solid-state relay; ? ratings from 25a and 50a per phase @ 48-530 vac ? interlock circuit prevents inadvertent actuation of both directions ? scr output for heavy industrial loads ? dc control ? led input status indicator product selection control voltage 25a 50a 4-32 vdc D53RV25C d53rv50c available options output specifications (1) description D53RV25C d53rv50c operating voltage (47-63hz) [vrms] 48-530 48-530 maximum load current [arms] (2) 25 50 transient overvoltage [vpk] 1100 1100 maximum off-state leakage current @ rated voltage [marms] (3) 6 6 minimum load current [arms] 0.1 0.1 maximum surge current 50 /60 hz (16.6ms) [apk] 475/500 710/750 1 second surge current 50/60 hz [apk] 100 150 maximum on-state voltage drop @ rated current [vpk] 1.35 1.35 maximum i2t for fusing (50/ 60 hz, 1/2 cycle) [a2 sec] 1139/1038 2520/2320 thermal resistance juncti on to case (rjc) [c/w] 0.26 0.25 minimum off-state dv/dt @ maximum rated voltage [v/sec] (4) 500 500 ul/iec 60947 motor control ratings at 120v [hp/kw] (5) 0.75/0.56 1.5/1.11 ul/iec 60947 motor control ratings at 240v [hp/kw] (5) 1/0.74 3/2.22 ul/iec 60947 motor control ratings at 380v [hp/kw] (5) 2/1.48 5/3.7 ul/iec 60947 motor control ratings at 480v [hp/kw] (5) 3/2.22 7.5/5.55
input specifications (1) description parameters control voltage range 4-32 vdc minimum turn-on voltage 4.0 vdc minimum turn-off voltage 1.0 vdc minimum input current (for on-state) 23ma maximum input current 35ma input resistance current regulated maximum turn-on time [msec] 150 maximum turn-off time [msec] 1/2 cycle interlocking time [msec] 100 general specifications description parameters input to output isolation 4000 vrms input/ output to ground isolation 2500 vrms maximum capacitance, input/output 8 pf ambient operating temperature range -40 to 80c ambient storage temperature range -40 to 100 c weight (typical) 13.1 oz (370g) housing material ul 94v0 (self extinguishing terminals mounted input terminal screw torque range:[in lbs/nm] 16.8/1.9 output terminal screw torque range:[in lbs/nm] 21.2/2.4 general notes 1) all parameters at 25c unless otherwise specified. 2) when mounted to the proper size heat sink (see derating curves) 3) measured between 1/l1 and 2/t1 or 3/l2 and 4/t2 4) off-state dv/dt test method per eia/narm standard rs-443, paragraph 13.11.1 5) at 40c ambient temperature. thermal derate information
mechanical specifications agency approvals designed in accordance with the requirements of iec 62314 rev. 120811
annex - enviromental information
|