riedon inc. 300 cypress avenue alhambra ca 91801 (626) 284-9901 (626) 284-1704 www.riedon.com 06/13 type power rating ( w ) at 80c resistances ( mw ) tcr ( ppm/ c ) tolerances operating temperature range max operating voltage csr1206 1 0.5 - 10 50 200 (0.5 w ) 1% 3% 5% -55c to +170c (p*r) csr2010 1.5 0.5 - 10 50 100 (0.5 w ) csr2512 1 1 0.5, 0.75, 1, 1.5, 2 11, 12, 13, 14, 15 50 6, 6.5, 7 75 4, 5, 10 100 2.5, 3 150 csr2512a 2 2 0.5, 0.75, 1, 1.5, 2 6.5, 7, 8, 9, 10 50 6, 6.5, 7 75 4, 5, 10 100 2.5, 3 150 csr2512b 3 2.5 4, 4.5, 5, 6 50 csr2512c 3 3 0.5, 0.75 100 1, 1.5, 2, 3 50 csr series ? resistances from 0.5 mohm to 15 mohm ? power rating up to 3 watts ? resistance tolerances to 1% ? customized resistance available ? tcrs to 50 ppm/c ? sizes: 1206 / 2010 / 2512 specifications ultra low ohm (metal strip) chip resistor 1 11, 12, 13, 14, 15 m w have green coating 2 6.5, 7, 8, 9, 10 m w at 50ppm have green coating 3 all values have green coating
riedon inc. 300 cypress avenue alhambra ca 91801 (626) 284-9901 (626) 284-1704 www.riedon.com 06/13 test specifcation test method black coating green coating temperature coeffcient of resistance as spec. +25/-55/+25/+125/+25c short time overload +0.5% +1.0% 5x rated power for 5 seconds load life +1.0% +1.0% 702c, max. working voltage for 1000 hrs with 1.5 hrs on and 0.5 hrs off dry heat +1.0% +1.0% at +170c for 1000 hrs solderability 95% min. coverage 2455c for 3 seconds resistance to soldering heat +0.5% +1.0% 2605c for 10 seconds thermal shock +0.5% (0.5%+0.05) -55c ~ 150c, 100 cycles specifcations *green coating cant be used in solder bath csr series ultra low ohm (metal strip) chip resistor reel sizes type quantity csr1206 embossed tape 2000 csr2010 csr2512 ordering information part description: part type - resistance - tolerance - tcr example: csr2512 1mohm 1% 50ppm power derating curve 0 20 40 60 80 100 120 0 20 40 60 80 100 120 power ( % ) ambient temperature (c) 140 160 180
riedon inc. 300 cypress avenue alhambra ca 91801 (626) 284-9901 (626) 284-1704 www.riedon.com 06/13 specifcations part power rating resistance value l (mm) b (mm) d (mm) c (mm) csr1206 1 0.5 3.200.25 1.600.10 0.600.20 1.350.25 csr1206 1 0.75 3.200.25 1.600.10 0.600.20 1.230.25 csr1206 1 1, 4, 5, 6 3.200.25 1.600.10 0.600.20 1.100.25 csr1206 1 2, 3, 10 3.200.25 1.600.10 0.600.20 0.600.25 csr1206 1 7, 8, 9 3.200.25 1.600.10 0.600.20 0.900.25 csr2010 1.5 0.5 5.080.25 2.540.15 0.600.20 2.170.25 csr2010 1.5 0.75 5.080.25 2.540.15 0.600.20 2.040.25 csr2010 1.5 1 5.080.25 2.540.15 0.600.20 1.840.25 csr2010 1.5 2, 6, 7, 8 5.080.25 2.540.15 0.600.20 1.540.25 csr2010 1.5 3 5.080.25 2.540.15 0.600.20 1.040.25 csr2010 1.5 4, 5 5.080.25 2.540.15 0.600.20 1.840.25 csr2010 1.5 9, 10 5.080.25 2.540.15 0.600.20 1.290.25 csr2512 1 0.5 6.350.254 3.180.254 1.250.20 1.300.38 csr2512 1 0.75 6.350.254 3.180.254 0.750.20 1.300.38 csr2512 1 1 6.350.254 3.180.254 0.650.20 1.300.38 csr2512 1 1.5 6.350.254 3.180.254 0.450.20 1.300.38 csr2512 1 2 6.350.254 3.180.254 0.350.20 1.300.38 csr2512 1 2.5 6.350.254 3.180.254 0.650.20 1.300.38 csr2512 1 3 6.350.254 3.180.254 0.550.20 1.300.38 csr2512 1 4 6.350.254 3.180.254 0.450.20 1.300.38 csr2512 1 5 6.350.254 3.180.254 0.350.20 1.300.38 csr2512 1 6 6.350.254 3.180.254 0.320.20 1.300.38 csr2512 1 6.5 6.350.254 3.180.254 0.300.20 1.300.38 csr2512 1 7 6.350.254 3.180.254 0.270.20 1.300.38 csr2512 1 10 6.350.254 3.180.254 0.250.20 1.300.38 csr2512 w/ green coating 1 to 3 0.5 6.350.25 3.000.20 0.600.20 2.680.25 csr2512 w/ green coating 1 to 3 0.75 6.350.25 3.000.20 0.600.20 2.480.25 csr2512 w/ green coating 1 to 3 1, 5, 6 6.350.25 3.000.20 0.600.20 1.930.25 csr2512 w/ green coating 1 to 3 1.5, 6.5, 7 6.350.25 3.000.20 0.600.20 1.430.25 csr2512 w/ green coating 1 to 3 2, 3 6.350.25 3.000.20 0.600.20 1.180.25 csr2512 w/ green coating 1 to 3 4, 4.5 6.350.25 3.000.20 0.600.20 2.180.25 csr2512 w/ green coating 1 to 3 8 to 15 6.350.25 3.000.20 0.600.20 1.180.25
|