84 1 <__ __
___ > <__ _
___ > <____________ - ___________> <__ < __> >
< __>
< <> >
< ___>
<__
_> >
<_ <__ __
___ > <____________ - ___________> <__ < __> >
< __>
< <> >
< ___>
<__
_> >
<_ <__ _
___ > < >
< > <_ <__ < >
volume 2 dimensions (in mm) no. of poles item no. no. of poles item no. terminal strips, gray, with push button, with test slot for test plug ? 2 mm/0.039 in 2-pole 805-102 3-pole 805-103 4-pole 805-104 5-pole 805-105 6-pole 805-106 7-pole 805-107 8-pole 805-108 9-pole 805-109 10-pole 805-110 11-pole 805-111 12-pole 805-112 13-pole 805-113 14-pole 805-114 : : 24-pole 805-124 direct printing on request other numbers of poles and pin spacings on request additional item nos. for colored terminal blocks: blue . . . / 000-006 orange . . . / 000-012 terminal strips, gray, with push button, without test slot 2-pole 805-302 3-pole 805-303 4-pole 805-304 5-pole 805-305 6-pole 805-306 7-pole 805-307 8-pole 805-308 9-pole 805-309 10-pole 805-310 11-pole 805-311 12-pole 805-312 13-pole 805-313 14-pole 805-314 : : 24-pole 805-324 direct printing on request other numbers of poles and pin spacings on request additional item nos. for colored terminal blocks: blue . . . / 000-006 orange . . . / 000-012 terminal strips 1.5 mm 2 /awg 16, pin spacing 3.5 mm/0.137 in; series 805 pin spacing 3.5 mm / 0.137 in 0.2 1.5 mm 2 awg 24 16 500 v/4 kv/2 in 10 a l 9 10 mm / 0.37 in pin spacing 3.5 mm / 0.137 in 0.2 1.5 mm 2 awg 24 16 500 v/4 kv/2 in 10 a l 9 10 mm / 0.37 in push in connection of solid conductors. connection and removal of fine-stranded conductors using push button testing with test plug ? 2 mm/0.079 in. insert the test plug slightly inclined into the test slot test plug, with cable 500mm/17.7, ? 2 mm/0.079 in, red 210-136 first solder pin front side diameter of drilled hole: 1.1 -0.1 mm l = (no. of poles x pin spacing) + 1.5 mm diameter of drilled hole: 1.1 -0.1 mm l = (no. of poles x pin spacing) + 1.5 mm s internal commoning for example, the requirement of not routing the ground (earth) conductors over the board is met by wago through the internal commoning of 805 series terminal strips. this way, custom termi- nal strips can be commoned to each other and marked at the factory. see also page 85. internal commoning
|
