key features suitable for tight spaces high precision thin film wide value range lower placement costs range of stabilities low cost in volume high reliability design rohs compliant component compatible with lead (pb) free soldering techniques applications voltage divider feedback circuits signal conditioning characteristics - electrical rated power at 70c: 0.0625w resistance range ? min: 100 100 resistance range ? max: 2k0 33k resistance tolerance: 0.1%, 0.5%, 1% temperature coefficient of 10 15 25 50 resistance (ppm/c): selection series: e24 maximum operating voltage: 50v maximum overload voltage: 100v operating temperature range: -55 to +155c operating voltage=(p*r) or max. operating voltage listed above, whichever is lower overload voltage=2.5*(p*r) or max. overload voltage listed above, whichever is lower the mrs series is an entirely new chip network utilising nickel chrome sputtering on high purity alumina. this network has been designed for high volume applications and is offered with 4 isolated resistors on a single substrate (4 x 0603 resistors) at 0.1% with convex terminals. a wide value range and alternative tcrs (temperature coefficient of resistance) make this a most versatile resistor solution. characteristics - environmental item requirement test method tol. 0.25% tol. > 0.25% temperature coefficient of as specified mil-std-202f method 304 resistance (t.c.r.): +25/-55/+25/+125/+25c short time overload: r0.25% r0.5% jis-c-5201-1 5.5 rcwv*2.5 or max. overload voltage for 5 seconds insulation resistance: 1000m ? mil-std-202f method 302 apply 100vdc for 1 minute endurance: r0.25% r0.5% mil-std-202f method 108a 702c, max. working voltage for 1000hrs with 1.5hrs on and 0.5 hrs off damp heat with load: r0.25% r0.5% mil-std-202f method 103b 402c, 90~95% r.h. max. working voltage for 1000hrs with 1.5hrs on and 0.5 hrs off bending strength: r0.25% r0.5% jis-c-5201-1 6.1.4 bending amplitude 3mm for 10 seconds solderability: 95% min. coverage mil-std-202f method 208h 2455c for 3 seconds resistance to soldering heat: r0.25% r0.5% mil-std-202f method 210e 2605c for 10 seconds dielectric withstand voltage: 100v mil-std-202f method 301 max. overload voltage for 1 minute thermal shock: r0.25% r0.5% mil-std-202f method 107g -55c ~150c, 100 cycles low temperature operation: r0.25% r0.5% jis-c-5201-1 7.1 1 hour, -65c, followed by 45 minutes of rcwv storage temperature: 253c; humidity < 80%rh smd precision thin film network type mrs series 1773252 cis bi 06/2011 dimensions are in millimeters dimensions are shown for for email, phone or live chat, go to: te.com/help and inches unless otherwise reference purposes only. specified. values in brackets specifications subject are standard equivalents. to change.
0 20 40 60 80 100 120 140 160 180 100 80 60 40 20 0 power ratio (%) ambient temperature (c) derating curve dimensions type no. of dimension weight resistors lwh ab c y (g) (1000 pcs) mrs 4 3.20 0.15 1.60 0.15 0.55 0.10 0.50 0.15 0.80 0.05 0.30 0.15 0.30 0.15 8.22 type a b c i p mrs 2.85 3.10 0.45 0.80 0.80 construction recommend land pattern circuit diagram smd precision thin film network type mrs series 1773252 cis bi 06/2011 dimensions are in millimeters dimensions are shown for for email, phone or live chat, go to: te.com/help and inches unless otherwise reference purposes only. specified. values in brackets specifications subject are standard equivalents. to change.
mrs 100r b f common part mrs - precision thin film chip network resistance value 100r (100 ohms) 1k0 (1000 ohms) 10k (10,000 ohms) 100k (100,000 ohms) tolerance b - 0.1% d - 0.5% f - 1% tcr c - 10ppm/c d - 15ppm/c f - 25ppm/c g - 50ppm/c how to order paper tape specification type a b w e f p 0 p 1 p 2 ?d 0 t mrs 1.95 0.1 3.50 0.1 8.0 0.2 1.75 0.1 3.5 0.05 4.0 0.1 4.0 0.05 2.0 0.05 1.5 +0.1/-0 0.85 0.1 packaging marking type packaging-quantity tape width reel diameter ?a ?b ?c w t mrs paper-5k 8mm 7 inch 178.5 1.5 60 +1/-0 13.0 0.2 9.0 0.5 12.5 0.5 type 100r 2k2 0k 22k 33k mrs 1000 2201 1002 2202 3302 smd precision thin film network type mrs series te connectivity, te connectivity (logo) and te (logo) are trademarks. other logos, product and company names mentioned herein may be trademarks of their respective owners. while te has made every reasonable effort to ensure the accuracy of the information in this datasheet, te does not guarantee th at it is error-free, nor does te make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. te reserves the right to make any adjustments to the information contained herein at any time without notice. te expressly disclaims all implied warranties regarding the information contained herein, including , but not limited to, any implied warranties of merchantabili- ty or fitness for a particular purpose. the dimensions in this datasheet are for reference purposes only and are subject to cha nge without notice. specifications are subject to change without notice. consult te for the latest dimensions and design specifications.
|
