part number: xlmrr58d t-1 3/4 (5mm) solid state lamp apr 14,2011 xdsa2574 v6 layout: maggie l. sunled corporation p. 1/3 features radial / through hole package reliable & robust low power consumption available on tape and reel rohs compliant absolute maximum ratings (t a =25c) mr (gaalas) unit forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 155 ma power dissipation p d 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3 seconds lead solder temperature [5mm below package base] 260c for 5 seconds package schematics notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subjec t to change without notice. operating characteristics (t a =25c) mr (gaalas) unit forward voltage (typ.) (i f =20ma) v f 1.85 v forward voltage (max.) (i f =20ma) v f 2.5 v wavelength of peak emission (typ.) (i f =20ma) p 660 nm wavelength of dominant emission (typ.) (i f =20ma) d 640 nm spectral line full width at half-maximum (typ.) (i f =20ma) 20 nm capacitance (typ.) (v f =0v, f=1mhz) c 45 pf part number emitting color emitting material lens-color luminous intensity (i f =20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. xlmrr58d red gaalas red diffused 100 148 60 100 148 660 red gaalas
part number: xlmrr58d t-1 3/4 (5mm) solid state lamp apr 14,2011 xdsa2574 v6 layout: maggie l. sunled corporation p. 2/3 ? mr remarks: if special sorting is required (e.g . binning based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
part number: xlmrr58d t-1 3/4 (5mm) solid state lamp apr 14,2011 xdsa2574 v6 layout: maggie l. sunled corporation p. 3/3 packing & label specifications
|
