View AVT-50663_7285602.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AVT-50663 dc C 6000 mhz ingap hbt gain block data sheet attention: observe precautions for handling electrostatic sensitive devices. esd machine model (120v) esd human body model (1200v) refer to avago application note a004r: electrostatic discharge, damage and control. description avago technologies AVT-50663 is an economical, easy- to-use, general purpose ingap hbt mmic gain block ampli?er utilizing darlington pair con?guration housed in a 6-lead (sot-363) surface mount plastic package. the darlington feedback structure provides inherent broad bandwidth performance, resulting in useful ope- rating frequency up to 6 ghz. this is an ideal device for small-signal gain cascades or if ampli?cation. AVT-50663 is fabricated using advanced ingap hbt (hetero-junction bipolar transistor) technology that o?ers state-of-the-art reliability, temperature stability and performance consistency. component image notes: package marking provides orientation and identi?cation 50 = device code x = month of manufacture ? = pin 1 features ? small signal gain ampli?er ? operating frequency dc to 6 ghz ? unconditionally stable ? 50 ohm input & output ? flat, broadband frequency response up to 2 ghz ? industry standard sot-363 ? lead-free, rohs compliant, green speci?cations 2 ghz, 5v vcc, 36ma (typical) ? 15.3 db gain ? 12.5 dbm p1db ? 25 dbm oip3 ? 4 db nf ? 15 db irl and orl applications ? cellular / pcs / 3g base station ? wireless data / wlan ? wimax / wibro ? catv & cable modem ? ism typical biasing con?guration pin 1, 2, 4, 5 (gnd) pin 6 pin 3 c byp r bias c block c block v d rfin rfout v cc = 5v r bias = (v cc - v d )/i d c byp top view gnd gnd 50x input gnd gnd output & v d
2 absolute maximum rating [1] t a =25 c symbol parameter units absolute max. i d device current ma 70 p in,max cw rf input power dbm 15 p diss total power dissipation [3] mw 297 t opt operating temperature c -40 to 85 t j,max junction temperature c 150 t stg storage temperature c -65 to 150 thermal resistance thermal resistance [2] jc = 149c/w (i d = 36 ma, t c = 85c) notes: 1. operation of this device in excess of any of these limits may cause permanent damage. 2. thermal resistance measured using infrared measurement technique. 3. ground lead temperature is 25c. derate 6.7mw/c for t c >106c. electrical speci?cations [4] t a = 25c, zo = 50 , v cc = 5 v, r bias = 30 , p in = -15 dbm (unless speci?ed otherwise) symbol parameter and test condition frequency units min. typ. max. i d device current ma 32.5 36 39.5 g p power gain 900 mhz 2000 mhz db 13.8 15.8 15.3 16.8 g p gain flatness 0.05 - 2 ghz 0.6 f 3db 3 db bandwidth ghz 5.2 oip3 [5] output 3 rd intercept point 900 mhz 2000 mhz dbm 23.5 26.4 25 s11 input return loss, 50 source 900 mhz 2000 mhz db -21.9 -15.4 s22 output return loss, 50 load 900mhz 2000 mhz db -19.1 -14.4 s12 reverse isolation 900 mhz 2000 mhz db -19.2 -19.2 p1db output power at 1db gain compression 900 mhz 2000 mhz dbm 13 12.5 nf noise figure 900 mhz 2000 mhz db 3.7 4 notes: 4. measurements obtained on cpwg line with reference plane at the ends of dut leads (as shown in figure 1). 5. oip3 test condition: f rf1 - f rf2 = 10mhz with input power of -15 dbm per tone measured at worse side band. figure 1. block diagram of board used for i d , gain, oip3, s11, s22, s12, op1db and nf measurements. circuit losses have been de-embedded from actual measurements. pin 1, 2, 4, 5 (gnd) pin 6 pin 3 rfin rfout v cc zo = 50 ohm zo = 50 ohm bias tee r bias
3 product consistency distribution charts at 2 ghz, v cc = 5 v, r bias = 30 notes: 1. statistical distribution determined from a sample size of 1421 samples taken from 6 di?erent wafers, measured on a production test board. 2. future wafers allocated to this product may have typical values anywhere between the minimum and maximum speci?cation limits. figure 2. i d (ma) distribution. lsl = 32.5, nominal = 36, usl = 39.5 figure 3. gain (db) distribution. lsl = 13.8, nominal = 15.2, usl = 16. 8 figure 4. oip3 (dbm) distribution. lsl = 23.5, nominal = 25 lsl usl 32 33 34 35 36 37 38 39 40 lsl 23.5 24 24.5 25 25.5 26 26.5 lsl usl 13.5 14 14.5 15 15.5 16 16.5 17 17.5
4 AVT-50663 typical performance curves t a = 25c, zo = 50 , p in = -15 dbm (unless speci?ed otherwise) figure 5. gain vs frequency at i d = 36ma figure 6. p1db vs frequency at i d = 36ma figure 7. oip3 vs frequency at i d = 36ma figure 8. nf vs frequency at i d = 36ma figure 9. i d vs v d and temperature 10 11 12 13 14 15 16 17 18 0123456 frequency (ghz) gain (db) 13 15 17 19 21 23 25 27 29 0123456 frequency (ghz) oip3 (dbm) 0 10 20 30 40 50 60 70 0123456 v d (v) i d (ma) 25c 85c -40c 5 6 7 8 9 10 11 12 13 14 0123456 frequency (ghz) p1db (dbm) 3 4 5 6 0123456 frequency (ghz) nf (db)
5 AVT-50663 typical performance curves t a = 25c, zo = 50 , p in = -15 dbm (unless speci?ed otherwise), continued figure 10. gain vs i d and temperature at 900 mhz figure 11. p1db vs i d and temperature at 900 mhz figure 12. oip3 vs i d and temperature at 900 mhz figure 13. nf vs i d and temperature at 900 mhz figure 14. gain vs i d and temperature at 2 ghz figure 15. p1db vs i d and temperature at 2 ghz 12 13 14 15 16 17 10 20 30 40 50 i d (ma) gain (db) 10 15 20 25 30 35 10 20 30 40 50 i d (ma) oip3 (dbm) 12 13 14 15 16 17 10 20 30 40 50 i d (ma) gain (db) 0 5 10 15 20 10 20 30 40 50 i d (ma) p1db (dbm) 2.0 2.5 3.0 3.5 4.0 4.5 5.0 10 20 30 40 50 i d (ma) nf (db) 0 5 10 15 20 10 20 30 40 50 i d (ma) p1db (dbm) 25c 85c -40c 25c 85c -40c 25c 85c -40c 25c 85c -40c 25c 85c -40c 25c 85c -40c
6 AVT-50663 typical performance curves t a = 25c, zo = 50 , p in = -15 dbm (unless speci?ed otherwise), continued figure 16. oip3 vs i d and temperature at 2 ghz figure 17. nf vs i d and temperature at 2 ghz figure 18. gain vs i d and frequency (ghz) figure 19. p1db vs i d and frequency (ghz) figure 20. oip3 vs i d and frequency (ghz) figure 21. nf vs i d and frequency (ghz) 10 15 20 25 30 35 10 20 30 40 50 i d (ma) oip3 (dbm) 10 11 12 13 14 15 16 17 10 20 30 40 50 i d (ma) gain (db) 0.9 0.05 2.0 2.5 3.0 4.0 5.0 6.0 10 15 20 25 30 35 10 20 30 40 50 i d (ma) oip3 (dbm) 0.05 2.5 3.0 4.0 5.0 6.0 0.9 2.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 10 20 30 40 50 i d (ma) nf (db) 0 5 10 15 20 10 20 30 40 50 i d (ma) p1db (dbm) 0.05 2.5 2.0 3.0 4.0 5.0 6.0 0.9 3.0 4.0 5.0 6.0 10 20 30 40 50 i d (ma) nf (db) 0.05 2.5 3.0 4.0 5.0 6.0 0.9 2.0 25c 85c -40c 25c 85c -40c
7 AVT-50663 typical performance curves t a = 25c, zo = 50 , p in = -15 dbm (unless speci?ed otherwise), continued figure 22. s11 vs frequency and i d figure 23. s22 vs frequency and i d -45 -40 -35 -30 -25 -20 -15 -10 -5 0 0246810 frequency (ghz) s11 (db) i d =20ma i d =36ma i d =45ma -45 -40 -35 -30 -25 -20 -15 -10 -5 0 0246810 frequency (ghz) s22 (db) i d =20ma i d =36ma i d =45ma
8 AVT-50663 typical scattering parameters t a = 25c, zo = 50 , i d = 20 ma, (unless speci?ed otherwise) id=20ma s11 s21 s12 s22 k mag angle db mag angle mag angle mag angle 0.05 0.11 0.5 14.84 5.52 178.1 0.12 -1.16 0.15 -1.3 1.1 0.1 0.11 0.058 14.83 5.51 176.3 0.12 -1.79 0.15 -2.2 1.1 0.5 0.12 -4.9 14.79 5.49 161.8 0.12 -8.75 0.17 -10.7 1.1 0.9 0.16 -14.3 14.68 5.42 147.4 0.12 -15.6 0.2 -21.3 1.1 1.5 0.21 -30.4 14.48 5.3 126.1 0.12 -25.6 0.25 -39.2 1.1 2.0 0.23 -42.5 14.32 5.2 108.7 0.11 -33.6 0.26 -54.1 1.1 2.5 0.24 -54.7 14.14 5.09 91.24 0.11 -41.5 0.28 -69.3 1.1 3.0 0.25 -67.6 13.94 4.98 73.8 0.1 -49.1 0.28 -85.2 1.2 3.5 0.26 -82 13.71 4.85 56.21 0.09 -56.5 0.29 -102 1.3 4.0 0.27 -98.3 13.41 4.68 38.38 0.09 -63.5 0.3 -120 1.3 4.5 0.29 -116 13 4.47 20.38 0.08 -69.7 0.33 -139 1.4 5.0 0.32 -135 12.44 4.19 2.521 0.07 -74.3 0.37 -156 1.6 5.5 0.35 -153 11.78 3.88 -14.9 0.06 -76.2 0.41 -172 1.8 6.0 0.37 -171 11.04 3.56 -31.7 0.05 -74.7 0.44 172.9 2.1 6.5 0.39 171.5 10.23 3.25 -48.2 0.05 -70.4 0.46 157.5 2.1 7.0 0.41 154.8 9.35 2.94 -64.4 0.05 -65.1 0.48 141.6 2.2 7.5 0.43 138.8 8.41 2.64 -80.2 0.05 -61 0.5 125.5 2.2 8.0 0.44 123.5 7.42 2.35 -95.5 0.06 -59.6 0.52 109.6 2.0 8.5 0.44 108.3 6.38 2.09 -110 0.06 -61.1 0.54 94.53 2.1 9.0 0.44 92.68 5.29 1.84 -124 0.07 -64.6 0.57 80.78 1.9 9.5 0.45 76.47 4.13 1.61 -137 0.07 -69.3 0.59 68.48 2.1 10.0 0.46 61.11 2.91 1.4 -150 0.08 -74.6 0.62 57.6 1.9 10.5 0.49 48.39 1.64 1.21 -161 0.08 -79.8 0.64 48.02 2.1 11.0 0.52 38.47 0.36 1.04 -171 0.09 -85 0.66 39.08 1.9 11.5 0.54 29.93 -0.89 0.9 179.5 0.09 -90.7 0.67 29.65 2.1 12.0 0.56 21.19 -2.13 0.78 169.2 0.09 -97.4 0.68 19.03 2.3 12.5 0.57 11.68 -3.33 0.68 158.4 0.1 -105 0.69 7.452 2.3 13.0 0.58 1.218 -4.48 0.6 147.1 0.1 -114 0.7 -4.48 2.5 13.5 0.59 -10.6 -5.58 0.53 135.5 0.1 -123 0.71 -16.3 2.8 14.0 0.59 -23.8 -6.69 0.46 124.2 0.1 -133 0.72 -27.5 3.1 14.5 0.61 -37.2 -7.91 0.4 113.8 0.1 -142 0.74 -37 3.3 15.0 0.63 -48.6 -9.22 0.35 105.1 0.1 -149 0.76 -44.1 3.3 16.0 0.69 -62.8 -11.8 0.26 93.18 0.1 -159 0.79 -51.8 3.4 17.0 0.71 -69.7 -14.2 0.19 85.49 0.1 -167 0.8 -57.5 4.3 18.0 0.72 -73.8 -16.2 0.15 78.34 0.1 -175 0.79 -67.4 5.6 19.0 0.71 -87.4 -18.1 0.12 65.13 0.1 169.3 0.79 -86.3 7.4 20.0 0.73 -111 -20.9 0.09 47.87 0.09 148.5 0.82 -109 9.1 notes: 1. s-parameters are measured on a cpwg line fabricated on 0.025 inch thick rogers ? ro4350 material. the input reference plane is at the end of the input lead. the output reference plane is at the end of the output lead.
9 AVT-50663 typical scattering parameters t a = 25c, zo = 50 , i d = 36 ma, (unless speci?ed otherwise) id=36ma s11 s21 s12 s22 k mag angle db mag angle mag angle mag angle 0.05 0.02 8.06 16.03 6.33 178.2 0.11 -0.93 0.06 -0.64 1.1 0.10 0.02 15.19 16.02 6.32 176.4 0.11 -1.6 0.07 -0.29 1.1 0.50 0.04 24.46 15.98 6.3 161.7 0.11 -7.94 0.08 -2.75 1.1 0.90 0.08 10.9 15.89 6.23 147.2 0.11 -14.4 0.11 -13 1.1 1.50 0.14 -14.7 15.68 6.08 125.6 0.11 -23.9 0.17 -33.1 1.1 2.00 0.17 -27.4 15.48 5.95 107.9 0.11 -31.7 0.19 -48.6 1.1 2.50 0.19 -39.7 15.26 5.79 90.43 0.1 -39.3 0.21 -64.5 1.1 3.00 0.21 -52.9 15.00 5.62 73.02 0.1 -46.7 0.22 -81.1 1.1 3.50 0.22 -67.7 14.71 5.44 55.58 0.09 -54 0.23 -99 1.2 4.00 0.23 -84.8 14.38 5.23 37.97 0.08 -60.9 0.25 -118 1.3 4.50 0.26 -104 13.95 4.98 20.21 0.08 -67.1 0.28 -138 1.3 5.00 0.28 -124 13.39 4.67 2.574 0.07 -71.6 0.33 -156 1.5 5.50 0.31 -145 12.74 4.33 -14.7 0.06 -73.3 0.38 -172 1.7 6.00 0.34 -164 12.01 3.99 -31.5 0.05 -71.3 0.41 171.9 2.0 6.50 0.37 178 11.22 3.64 -47.9 0.05 -66.3 0.44 156 2.0 7.00 0.39 160.5 10.35 3.29 -64.1 0.05 -60.4 0.47 139.7 2.0 7.50 0.41 143.7 9.42 2.96 -80 0.05 -56.2 0.49 123.3 2.1 8.00 0.42 127.7 8.43 2.64 -95.5 0.06 -55.2 0.51 107.1 1.8 8.50 0.43 112 7.39 2.34 -110 0.06 -57.3 0.54 91.87 1.9 9.00 0.43 95.8 6.30 2.07 -125 0.07 -61.6 0.57 78.02 1.7 9.50 0.44 79.08 5.15 1.81 -138 0.08 -66.9 0.6 65.67 1.6 10.00 0.45 63.22 3.92 1.57 -150 0.08 -72.8 0.62 54.82 1.8 10.50 0.48 50.05 2.65 1.36 -161 0.09 -78.5 0.64 45.31 1.6 11.00 0.51 39.79 1.37 1.17 -171 0.09 -84.1 0.66 36.42 1.7 11.50 0.53 30.99 0.11 1.01 178.6 0.09 -90.1 0.67 27.04 1.9 12.00 0.55 22.04 -1.13 0.88 168.3 0.1 -97.1 0.68 16.47 1.9 12.50 0.57 12.35 -2.34 0.76 157.3 0.1 -105 0.69 4.954 2.0 13.00 0.58 1.748 -3.49 0.67 145.9 0.1 -114 0.7 -6.9 2.2 13.50 0.58 -10.2 -4.59 0.59 134.2 0.1 -124 0.71 -18.6 2.5 14.00 0.59 -23.5 -5.71 0.52 122.7 0.1 -133 0.72 -29.7 2.7 14.50 0.61 -36.9 -6.92 0.45 112.2 0.1 -142 0.74 -39.1 2.9 15.00 0.63 -48.4 -8.23 0.39 103.4 0.1 -150 0.75 -46.1 3.1 16.00 0.69 -62.8 -10.82 0.29 91.06 0.1 -160 0.78 -53.5 3.2 17.00 0.71 -69.7 -13.19 0.22 82.81 0.1 -167 0.79 -59 3.8 18.00 0.72 -74 -15.13 0.18 74.96 0.1 -176 0.78 -68.8 4.8 19.00 0.71 -87.5 -17.05 0.14 60.98 0.1 168.7 0.77 -87.6 6.8 20.00 0.73 -112 -19.79 0.1 42.85 0.09 147.9 0.8 -110 9.0 notes: 1. s-parameters are measured on a cpwg line fabricated on 0.025 inch thick rogers ? ro4350 material. the input reference plane is at the end of the input lead. the output reference plane is at the end of the output lead.
10 AVT-50663 typical scattering parameters t a = 25c, zo = 50 , i d = 45 ma, (unless speci?ed otherwise) id=45ma s11 s21 s12 s22 k mag angle db mag angle mag angle mag angle 0.05 0 46.76 16.24 6.48 178.2 0.11 -0.72 0.05 -0.52 1.1 0.10 0.01 58.22 16.23 6.48 176.4 0.11 -1.52 0.05 0.833 1.1 0.50 0.03 48.46 16.19 6.45 161.8 0.11 -7.75 0.06 1.615 1.1 0.90 0.07 22.8 16.1 6.38 147.3 0.11 -14.1 0.09 -8.8 1.1 1.50 0.13 -9.99 15.89 6.23 125.7 0.11 -23.5 0.15 -30.6 1.1 2.00 0.16 -23.4 15.69 6.09 108 0.1 -31.2 0.18 -46.3 1.1 2.50 0.18 -36 15.45 5.93 90.57 0.1 -38.8 0.2 -62.3 1.1 3.00 0.2 -49.2 15.19 5.75 73.22 0.1 -46.2 0.21 -79.1 1.1 3.50 0.21 -64.1 14.9 5.56 55.87 0.09 -53.5 0.22 -97.1 1.2 4.00 0.22 -81.4 14.57 5.35 38.36 0.08 -60.4 0.24 -117 1.3 4.50 0.25 -101 14.14 5.1 20.7 0.08 -66.7 0.27 -137 1.3 5.00 0.27 -122 13.6 4.79 3.128 0.07 -71.3 0.32 -155 1.5 5.50 0.3 -142 12.96 4.45 -14.1 0.06 -73.1 0.37 -172 1.7 6.00 0.33 -162 12.25 4.1 -30.8 0.05 -71.4 0.41 172.7 2.0 6.50 0.36 179.9 11.47 3.75 -47.3 0.05 -66.4 0.44 156.7 2.0 7.00 0.38 162 10.62 3.4 -63.6 0.05 -60.2 0.46 140.3 2.0 7.50 0.4 145.1 9.702 3.06 -79.5 0.05 -55.7 0.49 123.7 2.0 8.00 0.42 128.9 8.724 2.73 -95 0.06 -54.6 0.51 107.4 1.7 8.50 0.42 113 7.69 2.42 -110 0.06 -56.6 0.54 92.11 1.9 9.00 0.43 96.69 6.603 2.14 -124 0.07 -60.9 0.57 78.13 1.7 9.50 0.43 79.8 5.45 1.87 -138 0.08 -66.3 0.6 65.67 1.6 10.00 0.45 63.79 4.226 1.63 -150 0.08 -72.2 0.62 54.74 1.7 10.50 0.48 50.49 2.953 1.4 -161 0.09 -78 0.65 45.17 1.5 11.00 0.51 40.13 1.671 1.21 -171 0.09 -83.7 0.66 36.24 1.7 11.50 0.53 31.23 0.408 1.05 178.5 0.1 -89.8 0.67 26.81 1.6 12.00 0.55 22.22 -0.83 0.91 168.1 0.1 -96.9 0.68 16.2 1.8 12.50 0.57 12.47 -2.04 0.79 157.1 0.1 -105 0.69 4.669 2.0 13.00 0.58 1.813 -3.19 0.69 145.6 0.1 -114 0.7 -7.19 2.2 13.50 0.58 -10.1 -4.29 0.61 133.9 0.1 -124 0.71 -19 2.4 14.00 0.59 -23.5 -5.42 0.54 122.3 0.11 -133 0.72 -30 2.4 14.50 0.6 -36.9 -6.63 0.47 111.7 0.1 -142 0.74 -39.4 2.8 15.00 0.63 -48.4 -7.93 0.4 102.9 0.1 -150 0.75 -46.4 3.0 16.00 0.69 -62.9 -10.5 0.3 90.4 0.1 -160 0.78 -53.8 3.1 17.00 0.71 -69.8 -12.9 0.23 81.97 0.1 -167 0.79 -59.3 3.7 18.00 0.72 -74.1 -14.8 0.18 73.92 0.1 -176 0.78 -69.1 4.8 19.00 0.71 -87.7 -16.7 0.15 59.73 0.1 168.5 0.77 -87.9 6.3 20.00 0.73 -112 -19.5 0.11 41.32 0.09 147.8 0.8 -110 8.1 notes: 1. s-parameters are measured on a cpwg line fabricated on 0.025 inch thick rogers ? ro4350 material. the input reference plane is at the end of the input lead. the output reference plane is at the end of the output lead.
11 part number ordering information part number no. of devices container AVT-50663-tr1g 3000 7 reel AVT-50663-blkg 100 antistatic bag package dimensions outline 63 (sot-363/sc-70) recommended pcb pad layout for avago's sc70 6l/sot-363 products e he d e a1 b a a2 q1 l c dimensions (mm) min. 1.15 1.80 1.80 0.80 0.80 0.00 0.10 0.15 0.10 0.10 max. 1.35 2.25 2.40 1.10 1.00 0.10 0.40 0.30 0.25 0.46 symbol e d he a a2 a1 q1 e b c l notes: 1. all dimensions are in mm. 2. dimensions are inclusive of plating. 3. dimensions are exclusive of mold ?ash & metal burr. 4. all speci?cations comply to eiajsc70. 5. die is facing up for mold and facing down for trim/form, ie: reverse trim/form. 6. package surface to be mirror ?nish. 0.650bcs. 0.65 0.026 0.079 0.018 0.039 dimensions in inches.
12 device orientation tape dimensions and product orientation for outline 63 p p 0 p 2 f w c d 1 d e a 0 10 max. t 1 (carrier tape thickness) t t (cover tape thickness) 10 max. b 0 k 0 description symbol size (mm) size (inches) length width depth pitch bottom hole diameter a 0 b 0 k 0 p d 1 2.40 0.10 2.40 0.10 1.20 0.10 4.00 0.10 1.00 + 0.25 0.094 0.004 0.094 0.004 0.047 0.004 0.157 0.004 0.039 + 0.010 cavity diameter pitch position d p 0 e 1.50 0.10 4.00 0.10 1.75 0.10 0.061 + 0.002 0.157 0.004 0.069 0.004 perforation width thickness w t 1 8.00 + 0.30 - 0.10 0.254 0.02 0.315 + 0.012 0.0100 0.0008 carrier tape cavity to perforation (width direction) cavity to perforation (length direction) f p 2 3.50 0.05 2.00 0.05 0.138 0.002 0.079 0.002 distance width tape thickness c t t 5.40 0.10 0.062 0.001 0.205 + 0.004 0.0025 0.0004 cover tape user feed direction cover tape carrier tape reel end vie w 8 mm 4 mm top view (package marking example orientation shown.) 2kx 2kx 2kx 2kx 50x 50x 50x 50x
for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005-2009 avago technologies. all rights reserved. av02-2244en - december 1, 2009 reel dimension 7 inch

▲Up To Search▲

Price & Availability of AVT-50663

	To Download AVT-50663 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .