097 rlp 7 www.vishay.com vishay bccomponents revision: 12-apr-13 1 document number: 28308 for technical questions, contact: aluminumcaps1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 aluminum capacitors radial low profile, 7 mm fig. 1 features ? useful life: 1500 h at 85 c ? low profile, 7 mm height ? miniaturized, high cv -product per unit volume ? polarized aluminum electrolytic capacitors, non-solid electrolyte ? radial leads, cylindrical aluminum case, insulated with a blue sleeve ? charge and discharge proof ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? general purpose; industrial , automotive and audio-video ? low surface demand on printed-circuit board ? coupling, decoupling, smoothing, filtering and timing ? portable and mobile equipme nt (small size, low mass), ? low profile equipment marking the capacitors are marked (where possible) with the following information: ? rated capacitance (in f) ? rated voltage (in v) ? negative terminal identification ? code indicating factory of origin ? name of manufacturer ? date code, in accordance with iec 60062 ? series number (097) quick reference data description value nominal case sizes (? d x l in mm) 4 x 7 to 6.3 x 7 rated capacitance range, c r 0.1 f to 220 f tolerance on c r 20 % rated voltage, u r 6.3 v to 63 v category temperature ra nge - 40 c to + 85 c endurance test at 85 c 1000 h useful life at 85 c 1500 h useful life at 40 c, 1.4 x i r applied 40 000 h shelf life at 0 v, 85 c 500 h based on sectional speci fication iec 60384-4/en 130300 climatic category iec 60068 40/085/56 fig.0 component outlines. 038 r s u higher cv-value s lower height 5 mm 134 rlp 5 097 rlp 7 7 mm selection chart for c r , u r , and relevant nominal case sizes (? d x l in mm) c r (f) u r (v) 6.3101625355063 0.10 - - - - - - 4 x 7 0.22 - - - - - - 4 x 7 0.47 - - - - - - 4 x 7 1.0------4 x 7 2.2------4 x 7 3.3 - - - - - 4 x 7 5 x 7 4.7 - - - - 4 x 7 5 x 7 6.3 x 7 10 - - 4 x 7 - 5 x 7 6.3 x 7 6.3 x 7 22 4 x 7 - 5 x 7 - 6.3 x 7 6.3 x 7 - 33 - 5 x 7 - 6.3 x 7 6.3 x 7 - - 47 5 x 7 - 6.3 x 7 6.3 x 7 - - - 100 - 6.3 x 7 6.3 x 7 - - - - 220 6.3 x 7 - - - - - -
097 rlp 7 www.vishay.com vishay bccomponents revision: 12-apr-13 2 document number: 28308 for technical questions, contact: aluminumcaps1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters and available forms fig. 2 - form ca: long leads fig. 3 - form tfa: taped in box (ammopack), formed leads, pitch f = 5 mm fig. 4 - form tna: taped in box (ammopack), pitch f = 2.5 mm note ? for detailed tape di mensions please see www.vishay.com/doc?28360 ? d f 0.5 15 min. 5 min. ? d + - dimensions in millimeters and packaging quantities nominal case size ? d x l case code ? d ? d max. l max. f packaging quantities form ca form tfa form tna 4 x 7 71 0.45 4.5 8 1.5 0.5 2000 2000 2000 5 x 7 72 0.45 5.5 8 2.0 0.5 1000 2000 2000 6.3 x 7 73 0.45 6.8 8 2.5 0.5 1000 2000 2000
097 rlp 7 www.vishay.com vishay bccomponents revision: 12-apr-13 3 document number: 28308 for technical questions, contact: aluminumcaps1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? unless otherwise specified, all electrical values in table 2 apply at t amb = 20 c, p = 86 kpa to 106 kpa, rh = 45 % to 75 %. ordering example electrolytic capacitor 097 series 100 f/16 v; 20 % nominal case size: ? 6.3 mm x 7 mm; form tfa ordering code: mal209735101e6 ? former 12nc: 2222 097 35101 electrical data symbol description c r rated capacitance at 120 hz, tolerance 20 % i r rated rms ripple current at 120 hz, 85 c i l2 max. leakage current after 2 min at u r tan ? max. dissipation factor at 120 hz z max. impedance at 100 khz electrical data and ordering information u r (v) c r 120 hz (f) nominal case size ? d x l (mm) i r 120 hz 85 c (ma) i l2 2 min (a) tan ? 120 hz z 100 khz ( ? ) ordering code mal2097....... bulk long leads taped ammopack form ca f (mm) form tfa f (mm) form tna f (mm) 6.3 22 4 x 7 31 3 0.24 8.4 53229e6 1.5 33229e6 5.0 73229e6 2.5 47 5 x 7 47 3 0.24 4.6 53479e6 2.0 33479e6 5.0 73479e6 2.5 220 6.3 x 7 90 14 0.24 1.8 53221e6 2.5 33221e6 5.0 73221e6 2.5 10 33 5 x 7 43 4 0.20 3.7 54339e6 2.0 34339e6 5.0 74339e6 2.5 100 6.3 x 7 80 10 0.20 2.2 54101e6 2.5 34101e6 5.0 74101e6 2.5 16 10 4 x 7 25 3 0.16 10.0 55109e6 1.5 35109e6 5.0 75109e6 2.5 22 5 x 7 39 4 0.16 5.0 55229e6 2.0 35229e6 5.0 75229e6 2.5 47 6.3 x 7 59 8 0.16 3.5 55479e6 2.5 35479e6 5.0 75479e6 2.5 100 6.3 x 7 90 16 0.16 2.5 55101e6 2.5 35101e6 5.0 75101e6 2.5 25 33 6.3 x 7 53 9 0.14 2.6 56339e6 2.5 36339e6 5.0 76339e6 2.5 47 6.3 x 7 65 12 0.14 1.9 56479e6 2.5 36479e6 5.0 76479e6 2.5 35 4.7 4 x 7 20 3 0.12 10.0 50478e6 1.5 30478e6 5.0 70478e6 2.5 10 5 x 7 30 4 0.12 5.6 50109e6 2.0 30109e6 5.0 70109e6 2.5 22 6.3 x 7 47 8 0.12 3.0 50229e6 2.5 30229e6 5.0 70229e6 2.5 33 6.3 x 7 60 12 0.12 2.6 50339e6 2.5 30339e6 5.0 70339e6 2.5 50 3.3 4 x 7 18 3 0.10 14.0 51338e6 1.5 31338e6 5.0 71338e6 2.5 4.7 5 x 7 23 3 0.10 10.0 51478e6 2.0 31478e6 5.0 71478e6 2.5 10 6.3 x 7 34 5 0.10 5.5 51109e6 2.5 31109e6 5.0 71109e6 2.5 22 6.3 x 7 53 11 0.10 2.9 51229e6 2.5 31229e6 5.0 71229e6 2.5 63 0.10 4 x 7 1.3 3 0.08 170.0 58107e6 1.5 38107e6 5.0 78107e6 2.5 0.22 4 x 7 2.9 3 0.08 110.0 58227e6 1.5 38227e6 5.0 78227e6 2.5 0.47 4 x 7 7.9 3 0.08 66.0 58477e6 1.5 38477e6 5.0 78477e6 2.5 1.0 4 x 7 11 3 0.08 36.0 58108e6 1.5 38108e6 5.0 78108e6 2.5 2.2 4 x 7 17 3 0.08 19.0 58228e6 1.5 38228e6 5.0 78228e6 2.5 3.3 5 x 7 21 3 0.08 14.0 58338e6 2.0 38338e6 5.0 78338e6 2.5 4.7 6.3 x 7 26 3 0.08 10.0 58478e6 2.5 38478e6 5.0 78478e6 2.5 10 6.3 x 7 40 7 0.08 5.5 58109e6 2.5 38109e6 5.0 78109e6 2.5
097 rlp 7 www.vishay.com vishay bccomponents revision: 12-apr-13 4 document number: 28308 for technical questions, contact: aluminumcaps1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ripple current and useful life fig. 5 - multiplier of useful life as a function of ambient temperature and ripple current load table 1 additional electrical data parameter conditions value voltage surge voltage u s ? 1.15 x u r reverse voltage u rev ? 1 v current leakage current after 2 min at u r i l2 ? 0.01 c r x u r or 3 a (whichever is greater) resistance equivalent series resistance (esr) calculated from tan ? max. and c r (see table 2) esr = tan ? /2 ?? f c r multiplier of ripple current (i r ) as a function of frequency frequency (hz) i r multiplier 50 0.60 120 1.00 400 1.20 800 1.30 ?? 2000 1.40 3.3 3.2 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.5 0.0 3.1 40 50 60 70 80 90 100 t amb (c) lifetime multiplier (1) 70 50 4.0 6 .0 2.0 1.5 30 15 10 3.0 20 1.0 i a i r i a = actual ripple current at 120 hz i r = rated ripple current at 120 hz, 85 c (1) u s eful life at 85 c and i r applied: 1500 h ccc205
097 rlp 7 www.vishay.com vishay bccomponents revision: 12-apr-13 5 document number: 28308 for technical questions, contact: aluminumcaps1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 table 2 test procedures and requirements test procedure (quick reference) requirements name of test reference endurance iec 60384-4/ ? en 130 300, ? subclause 4.13 t amb = 85 c, u r applied; ? 1000 h ? c/c: 20 % ? tan ??? 2 x spec. limit ? i l2 ? spec. limit useful life cecc 30301, ? subclause 1.8.1 t amb = 85 c, u r and i r applied; ? 1500 h ? c/c: 50 % ? tan ??? 3 x spec. limit ? z ? 3 x spec. limit ? i l2 ? spec. limit ? no short or open circuit ? total failure percentage: ?? 3 % shelf life ? (storage at high temperature) iec 60384-4/ ? en 130300, ? subclause 4.17 t amb = 85 c; no voltage applied; ? 500 h ? after test: u r to be app lied for 30 min, ? 24 h to 48 h befo re measurement ? c/c, tan ? , z: ? for requirements see ? endurance test above ? i l2 ? spec. limit
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
