View LB102WV1-TJ01_7245575.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1/ 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 title 10.2?w (800 x rgb x 480) tft - lcd buyer model signature date / / / product engineering dept. lg. philips lcd co., ltd approved by date reviewed by prepared by tj01 suffix lb102wv1 model lg.philips lcd co., ltd. supplier specification for approval ( ) preliminary specification ( ? ) final specification a.r.cho / engineer s.g. kim /engineer c.s. kyeong /s.manager please return 1copy for your confirmation with your signature and comment www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 2/ 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 contents 3 record of revisions 0 23 precautions 11 21 packing 10 20 reliability test 9 18 mechanical characteristics 8 16 electro-optical characteristics 7 9 electrical characteristics 6 8 absolute maximum ratings 5 6 interface (input terminal) 4 5 general specification 3 4 features 2 4 summary 1 page item no www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 3/ 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 final specification aug.08.2006 1.0 add vcom level when do not use gate modulation and [note 6-1,2] 9,10 aug.10.2006 1.1 add packing form 22 first draft (preliminary) jul.06.2006 0.0 summary page revision date revision no. record of revisions www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 4/ 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 1. summary the LB102WV1-TJ01 is a board assembly product of tft lcd without any extra system. this module utilizes amorphous silicon thin film trans istors and a 15:9 aspect ratio. a 10.2? active matrix liquid crystal display allows 262,144 colors to be displayed. the applications are portable dvd, mult imedia applications and others av system. 2. features ?utilizes a panel with a 15:9 aspect ratio suitable for use in wide-screen systems. ?the 10.2? screen produces a high resolution image composed of 384,000 pixel in a stripe arrangement. ?wide viewing angle technology is employed. the most suitable viewing direction is in the 6 o?clock. ?by adopting an active matrix drive, a picture with high contrast is realized. ?a thin, light and compact module is accomp lished through the use of cog mounting technology. ?by adopting a high aperture panel, high transmittance colo r filter and high transmission polarizing plates, transmittance ratio is realized. ?this module is compatible with the timing controller , developed by lg.philips lcd. [ t-con model name : firebird, part number : 0ihyl-0070a ] block diagram 10.2?w tft-lcd (800xrgbx480) source drive ic gate drive ic digital 6bit r,g,b source control signal gate control signal gamma reference voltage fpc 60 pin power for lcd www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 5/ 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 3. general specification 800(h) x 3(r,g,b) x 480(v) number of dots digital interface (cmos) signal interface 10.2? (25.89 y ) screen size (diagonal) 0.2775 mm (h) ? 0.2775 mm (v) pixel pitch anti-glare treatment surface treatment 114.2g(typ.) weight rgb vertical stripes color filter array 6 bit, 262,144 colors color depth 222mm (h) x 133.2mm (h) active area 230.6mm (h) x 142.2mm (v) x 1.7mm (d) outline dimension normally white, transmitting type display mode a-si tft active matrix display technology specification characteristic item www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 6/ 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 4. interface (input terminal) ground gnd 24 ground gnd 25 power line for logic vcc 26 power line for logic vcc 27 power line for logic vcc 28 source scanning left start signal ssp2 29 source scanning right start signal ssp1 30 ground gnd 23 ground gnd 22 voltage for gamma correction vref0 21 voltage for gamma correction vref1 20 voltage for gamma correction vref2 19 voltage for gamma correction vref3 18 voltage for gamma correction vref4 17 voltage for gamma correction vref5 16 power line for source driver ic vdd 15 power line for source driver ic vdd 14 voltage applied to color filter substrate vcom 13 voltage applied to color filter substrate vcom 12 voltage applied to color filter substrate vcom 11 gate driver output enable control goe 10 up/down scanning change u_d 9 gate driver scanning clock pulse gsc 8 gate scanning start signal 2 gsp2 7 gate scanning start signal 1 gsp1 6 power line for gate driver ic logic gvcc 5 gate driver negative voltage vgl 4 gate driver positive voltage vgh 3 ground gnd 2 ground gnd 1 notes description symbol pin 1> tft-lcd panel driving part www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 7/ 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 notes description symbol pin blue data 4 b4 54 blue data 5 [msb] b5 55 ground gnd 56 reverse of input r,g,b data code rev 57 left/right scanning change l_r 58 voltage applied to color filter substrate vcom 59 voltage applied to color filter substrate vcom 60 blue data 3 b3 53 blue data 2 b2 52 blue data 1 b1 51 blue data 0 [lsb] b0 50 ground gnd 49 green data 5 [msb] g5 48 green data 4 g4 47 green data 3 g3 46 green data 2 g2 45 green data 1 g1 44 green data 0 [lsb] g0 43 ground gnd 42 red data 5 [msb] r5 41 red data 4 r4 40 red data 3 r3 39 red data 2 r2 38 red data 1 r1 37 red data 0 [lsb] r0 36 ground gnd 35 ground gnd 34 polarity reversal signal pol 33 source driver clock input ssc 32 source driver output enable control soe 31 * input connector for the operation : gf05a- 60s-af manufactured by ls cable or equivalent. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 8/ 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 5. absolute maximum ratings v 4 -0.3 t a =25 ? gvcc [note 5- 3,4,5,6] ? 60 -10 - t op operating temperature ( ambient temperature ) [note 5-3,4] ? 70 -20 - t st storage temperature v 40 -0.3 t a =25 ? vgh-vgl v 0.3 -20 t a =25 ? vgl v 40 -0.3 t a =25 ? vgh gate driver voltage [note 5-2] v vdd+0.5 -0.5 t a =25 ? v i2 analog input signals [note 5-1] v vcc+0.5 -0.5 t a =25 ? v i1 digital input signals v 14.5 -0.3 t a =25 ? vdd source driver voltage v 4.0 -0.5 t a =25 ? vcc logic voltage notes unit max min condition symbol parameter [note 5-1] u_d,gsp1/2,gsc,goe, ssp1/2, soe, ssc, pol, rev, l_r, r0-5/g0-5/b0-5 [note 5-2] vcom,vref0/1/2/3/4/5 [note 5-3] this rating applies to all parts of the module and should not be exceeded. [note 5-4] maximum wet-bulb temperature is 52 ? . condensation of dew must be avoided as electrical current leaks will occur, causing a degradation of performance specifications. [note 5-5] the operating temperature only guarantees operation of the circuit and doesn?t guarantee all the contents of electro-optical specification. [note 5-6] ambient temperature when th e backlight is lit (reference value). the followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit. <4upsbhf> <0qfsbujpo> %sz#vmc5fnqfsbuvsf<?> 8fu#vmc 5fnqfsbuvsf<?> )vnjejuz<
3)> www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 9/ 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 6. electrical characteristics 1> recommended operating conditions ? tft-lcd panel driving section t a =25 ? ***** cautionary matter : when applying or disconnecting power, please be sure that such action is sequentially carried out for all power supplies. in addition, apply input signals only after power has been turned on. [power sequence] -source driver : power on sequence : case.1) vcc > logic input > vdd > vref0 to vref5. case.2) vcc > vdd > vref0 to vref5 > logic input. power off sequence is reverse turn of this. -gate driver : power on sequence : gvcc > vgl > input signal > vgh. power off sequence is reverse turn of this. no gate modulation [note 6-2] v 4.9 4.7 4.5 dc vref3~5 0.6vdd - gnd+0.2 vdd = 12v ma 45 29 - idd source driver supply current gvcc = 3.3v ma 0.2 0.01 - gicc vgh = 23v ma 0.7 0.4 - igh gate driver high supply current vcc = 3.3v ma 25 14 - icc logic supply current gate driver logic supply current with gate modulation [note 6-1] [note 6-2] color filter substrate voltage v 5.2 5.0 4.8 vcom dc vgl = -7.8v ma 0.8 0.5 - igl gate driver low supply current lo hi v 24 23 22 vgh tft logic supply voltage v 13.0 12.0 11.0 vdd source driver supply voltage low level high level v vdd-0.2 - 0.4vdd vref0~2 gamma correction voltage v 3.6 3.3 3.0 gvcc v -6.8 -7.8 -8.8 vgl gate driver v 0.3vcc - 0 v il v vcc - 0.7vcc v ih digital input signal v 3.6 3.3 3.0 vcc logic supply voltage notes unit max typ min symbol parameter www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 10 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 [note 6-1] this is vgh timing diagram when adopt gate modulation. you can use vgh(dc) or modulated vgh(ac) for tft hi voltage.then you should design vcom level proper. vgh 7v goe [note 6-2] we recommend to use buffer or op-amp for vcom. vcom input vcom vcom input vcom buffer op-amp + - www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 11 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 2> timing characteristics of input signals (note 1) at least input one cycle of gsc during ?l? period of gsp1. g a t e [note 1] ns - - 200 tsu gsp1/2 setup time ns - - 300 thd gsp1/2 hold time us 4 2 1.5 twcl goe pulse width soe,pol soe high level soe signal pulse width duration ns - - 6 th4 pol signal soe hold time ns - - 500 pwclk gsc pulse width ns 100 - - tfck gsc falling time ns 100 - - trck gsc rise time khz 37.8 31.5 24.7 fclk gsc frequency ns - - 6 ts4 pol signal soe setup time us 4 2.5 1 twtp1 ssc cycle - - 2 th3 soe low hold time from final data ssc ssc cycle - - 3 ts3 soe signal setup time ns - - 3 th2 start pulse hold time ssp1/2 ns - - 3 ts2 start pulse setup time ns - - 2 th1 data/rev hold time data,rev ns - - 2 ts1 data/rev setup time ns - - 4 twl low level ssc pulse width duration ns - - 4 twh high level ssc pulse width duration ssc mhz 40 33.26 26 fclk ssc frequency s o u r c e notes unit max typ min symbol parameter www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 12 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 1. u_d is used as input pin for selecting the shifting direction of bi-directional shift register. from right to left form left to right scanning direction ssp2 l ssp1 h ssp input pin l_r 2. l_r is is used as input pin for the horizontal scanni ng direction. if l_r is h, ssp1 is the input pin for the source start pulse(ssp). otherwise(if l_r is l) , ssp2 is the input pin for the source start pulse. 3> detail description of pin functions up to down down to up output shift gsp2 gsp1 gsp input pin l h u_d www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 13 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 4> recommended gamma correction voltage [vref0 to vref5] unit : voltage 1.71 vref5 7.6 vref1 6 vref2 5.03 vref3 3.47 9.35 typ vref4 vref0 symbol (note 1) be sure to maintain the voltage relationships of vdd > vref0 > vref1 > vref2 > vref3 > vref4 > vref5 > gnd www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 14 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 5> timing diagram source d-ic timing diagram y ssc dxx rev ssp1 (l/r=h) ssp2(l/r=l) (input) ssp1 (l/r=h) ssp2 (l/r=l) (input) fclk twh twl ts1 th1 ts2 th2 ts1 ts3 1 2 199 200 ssc 70 30 td2 last (200) soe th3 twtp1 ts4 th4 pol www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 15 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 t gate d-ic timing diagram trck 10 90 tfck 90 10 50 pwclk pwclk 70 tsu 70 thd gsc gsp1/ gsp2 (in) 70 50 50 70 70 twcl goe www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 16 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 7. electro-optical characteristics t a =25 ? measuring condition ; -measuring surroundings : dark room -measuring temperature : t a =25 ? -adjust operating voltage to get optimum co ntrast at the cent er of the display. -measured value at the center point of lcd panel after more than 30 minutes while backlight turning on. - - 0.349 - center wy - - 0.316 - center wx white color chromaticity (reference value) with reference backlight nit - 400 - center l luminance (reference value) [note 7-3] ms 12 7 - t =0 g tr r rise time response time ms 23 18 - tr d decay time d u l r t cr symbol cr ? 10 center optimal condition y axis, down ( =270 ) y axis, up ( =90 ) x axis, left ( =180 ) x axis, right( =0 ) [note 7-1] [note 7-2] degree - 70 65 viewing angle degree - 70 65 degree - 60 55 degree - 60 55 max typ min [note 7-1] - - 400 300 contrast ratio % - 7.9 - transmittance (with pol) parameter notes unit values photo detector field = 1 ? center lcd module optical stage(x,y) ; pr-880, pr-705 or equivalent 500mm ** all electro-optical characteristics are measured under backlight condition. but, the following conditions are just ?interna l conditions for quality test? of lg.philips lcd. center point - - 0.297 - wy center point - - 0.282 - wx white color chromaticity center point nit - 5000 - l luminance notes unit max typ min symbol parameter www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 17 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 [note 7-1] contrast ratio is defined as follows ; contrast ratio(cr) = photo detector output with lcd being ?white? photo detector output with lcd being ?black? [note 7-2] viewing angle range is defined as follows; normal y e f q f = 0 g , right f = 180 g , left f = 270 g , down (6:00) (fpc side) f = 90 g , up (12:00) x [note 7-3] response time is obtained by measuring the transition time of photo detector output, when input signals are applied so as to make the area ?black? to and from ?white?. 0% 10% 90% white white black time photo detector output r d www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 18 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 8. mechanical characteristics - g mm mm mm mm mm unit 114.2(typ.), 126 (max) 133.2 222.0 1.7 0.3 142.2( 0.5) 230.6( 0.5) anti-glare treatment surface treatment weight vertical horizontal active display area depth vertical horizontal outline dimension notes specification parameter www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 19 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 note) unit:[mm], general tolerance: 0.5mm [ outline dimension ] b11 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 20 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 9. reliability test -20 ? (0.5h) ~ 70 ? (0.5h) / 100 cycles ta=50 ? 80%rh 240h ta=-10 ? 240h ta=60 ? 240h ta=-20 ? 240h ta=70 ? 240h test condition notes high temperature and high humidity operation test 5 thermal shock test 6 low temperature operation test 4 high temperature operation test 3 low temperature storage test 2 high temperature storage test 1 test items no note) 1. t a = ambient temperature. 2. in the normal condition after test, there shall be no display ng issue occurred. all the cosmetic specification is judged before the reliability stress. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 21 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 10. packing 10-1. designation of lot mark b) location of lot mark serial no. is printed on the label. the label is attached to the front side of assembly. this is subject to change without prior notice. a) lot mark abcdefghi jklm a,b,c : size(inch) d : year e : month f ~ m : serial no. note 1. year 2. month mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 22 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 10-2. packing form a) package quantity in one box :40 pcs b) box size : 465 x 338 x 174 (mm) www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 23 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 11. precautions please pay attention to the following when you use this tft lcd module. 11-1. mounting precautions (1) you should consider the mounting structure so that uneven force(ex. twisted stress) is not applied to the module. and the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (2) please attach a transparent protective plate to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (3) you should adopt radiation structure to satisfy the temperature specification. (4) acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (5) do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics deteriorate the polarizer.) (6) when the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzine. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers . do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (7) wipe off saliva or water drops as soon as possible. their long time contact with polarizer causes deformations and color fading. (8) the metal case of a module should be contacted to electrical ground of your system. 11-2. operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than following voltage : v= ? 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lower temperature, it becomes longer.) (3) brightness depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time(required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperature change. condensation makes damage to polarizer or electrical contacted parts. and afte r fading condensation, smear or spot will occur. (5) when fixed patterns are displayed for a l ong time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimized the interference. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 24 / 24 LB102WV1-TJ01 liquid crystal display ver. 1.1 aug.10, 2006 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground through wrist band etc. and don?t touch interface pin directly. 11-3. electrostatic discharge control strong light exposure causes degradation of polarizer and color filter. 11-4. precautions for strong light exposure when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 ? c and 35 ? c at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. 11-5. storage (1) when the protection film is peeled off, static el ectricity is generated between the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) the protection film is attached to the polarizer with a small amount of glue. if some stress is applied to rub the protection film against the polarizer during the time you peel off the film, the glue is apt to remain on the polarizer. please carefully peel off the protection film without rubbing it against the polarizer. (3) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of glue still on the polarize r after the protection film is peeled off. (4) you can remove the glue easily. when the glue remains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. 11-6. handling precautions for protection film www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of LB102WV1-TJ01

	To Download LB102WV1-TJ01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .