sfh 3201 npn-silizium-fototransi stor im smt-geh?use silicon npn phototrans istor in smt package lead (pb) free produc t - rohs compliant 2007-03-30 1 wesentliche merkmale ? speziell geeignet fr anwendungen im bereich von 460 nm bis 1080 nm ? hohe linearit?t ? nur gegurtet lieferbar anwendungen ? umgebungslicht-detektor ? lichtschranken fr gleich- und wechsel-lichtbetrieb ? industrieelektronik ? ?messen/steuern/regeln? typ type bestellnummer ordering code sfh 3201 q65110a1207 sfh 3201-2/3 q65110a2479 features ? especially suitable for applications from 460 nm to 1080 nm ? high linearity ? available only on tape and reel applications ? ambient light detector ? photointerrupters ? industrial electronics ? for control and drive circuits
2007-03-30 2 sfh 3201 grenzwerte maximum ratings bezeichnung parameter symbol symbol wert value einheit unit betriebs- und lagertemperatur operating and storage temperature range t op ; t stg ? 40 + 100 c kollektor-emitterspannung collector-emitter voltage v ce 20 v kollektor-emitterspannung, t < 120 s collector-emitter voltage v ce 70 v kollektor strom collector current i c 50 ma kollektorspitzenstrom, < 10 s collector surge current i cs 100 ma emitter-kollektorspannung emitter-collector voltage v ec 7 v verlustleistung, t a = 25 c total power dissipation p tot 120 mw w?rmewiderstand fr montage auf pc-board thermal resistance for mounting on pcb r thja 500 k/w
sfh 3201 2007-03-30 3 kennwerte ( t a = 25 c) characteristics bezeichnung parameter symbol symbol wert value einheit unit wellenl?nge der max. fotoempfindlichkeit wavelength of max. sensitivity s max 850 nm spektraler bereich der fotoempfindlichkeit s = 10% von s max spectral range of sensitivity s = 10% of s max 460 1080 nm bestrahlungsempfindliche fl?che radiant sensitive area a 0.55 mm 2 abmessung der chipfl?che dimensions of chip area l b l w 1 1 mm mm halbwinkel half angle ? 60 grad deg. kapazit?t, v ce = 0 v, f = 1 mhz, e = 0 capacitance c ce 15 pf dunkelstrom dark current v ce = 20 v, e = 0 i ceo 3 ( 200) na
2007-03-30 4 sfh 3201 directional characteristics s rel = f ( ? ) die fototransistoren werden nach ihrer fotoemp findlichkeit gruppiert und mit arabischen ziffern gekennzeichnet. the phototransistors are grouped according to thei r spectral sensitivity and distinguished by arabian figures. bezeichnung parameter symbol symbol wert value einheit unit -1 -2 -3 fotostrom, = 950 nm photocurrent e e = 0.1 mw/cm 2 , v ce = 5 v e v = 1000 ix, normlicht/ standard light a, v ce = 5 v i pce i pce 63 125 1.65 100 200 2.6 160 320 4.2 a ma anstiegszeit/abfallzeit rise and fall time i c = 1 ma, v cc = 5 v, r l = 1 k t r , t f 16 24 34 s kollektor-emitter- s?ttigungsspannung collector-emitter saturation voltage i c = i pcemin 1) 0.3, e e = 0.1 mw/cm 2 v cesat 170 ( 250) 170 ( 250) 170 ( 250) mv 1) i pcemin ist der minimale fotostrom der jeweiligen gruppe. 1) i pcemin is the min. photocurrent of the specified group. ohf01402 90 80 70 60 50 40 30 20 10 20 40 60 80 100 120 0.4 0.6 0.8 1.0 ? 0.2 0.4 0.6 0.8 1.0 100 0 0 0
sfh 3201 2007-03-30 5 t a = 25 c, = 950 nm rel. spectral sensitivity, s rel = f ( ) photocurrent i pce = f ( t a ), v ce = 5 v, normalized to 25 c photocurrent i pce = f ( v ce ) ohf02332 0 rel s 400 10 20 30 40 50 60 70 80 % 100 500 600 700 800 900 nm 1100 t ohf01524 a 0 -25 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 25 50 75 100 pce pce 25 c v ohf00327 ce 0 010 20 30 40 50 60 70 v ma pce 1.0 mw/cm 0.5 1.0 1.5 2.0 2.5 3.0 2 2 0.5 mw/cm 0.25 mw/cm 2 0.1 mw/cm 2 photocurrent i pce = f ( e e ), v ce = 5 v dark current i ceo = f ( v ce ), e = 0 collector-emitter capacitance c ce = f ( v ce ), f = 1 mhz e ohf00326 e -3 10 pce -4 10 10 1 ma 2 mw/cm 10 -2 10 0 10 -3 10 -2 10 -1 0 10 1 2 3 v ohf02341 ce 0 ceo -2 10 10 -1 10 0 10 1 10 2 na 10 20 30 40 50 70 v v ohf02344 ce c 0 10 -2 -1 10 0 10 1 10 10 2 v pf 5 10 15 20 total power dissipation p tot = f ( t a ) dark current i ceo = f ( t a ), v ce = 10 v, e = 0 t ohf00309 a 0 tot p 0 20 40 60 80 c 100 mw 20 40 60 80 100 120 140 t ohf02342 a 0 ceo -1 10 10 0 10 1 10 2 10 3 na 20 40 60 80 100 ?c
2007-03-30 6 sfh 3201 ma?zeichnung package outlines ma?e in mm (inch) / dimensions in mm (inch). 3.4 (0.134) 3.0 (0.118) 5.8 (0.228) 6.2 (0.244) 0.15 (0.006) 0.13 (0.005) 0...0.1 (0...0.004) 2.1 (0.083) 1.7 (0.067) 4 6 1 3 geoy6982 4.2 (0.165) 3.8 (0.150) 25 - emitter collector 12 3 4 6 5 - -- 0.3 (0.012) 0.5 (0.020) spacing spacing 0.4 (0.016) 0.7 (0.028) b a 0.2 m a active area 0.55 (0.022) 0.1 m b 2.54 (0.100) 1.27 (0.050)
sfh 3201 2007-03-30 7 empfohlenes l?tpaddesign reflow l?ten recommended solder pad reflow soldering solder resist l?tstopplack cu-area >5 mm cu-fl?che >5 mm 2 ohpy0030 3.9 (0.154) 1.2 (0.047) 1.27 (0.050) 0.6 (0.024) 1.27 (0.050) 2 paddesign w?rmeableitung for improved fr verbesserte padgeometrie heat dissipation
2007-03-30 8 sfh 3201 l?tbedingungen vorbehandlung nach jedec level 4 soldering conditions preconditioning acc. to jedec level 4 reflow l?tprofil fr bleifreies l?ten (nach j-std-020c) reflow soldering profile for lead free soldering (acc. to j-std-020c) wellenl?ten (ttw) (nach cecc 00802) ttw soldering (acc. to cecc 00802) ohla0687 0 0 t t ?c s 120 s max 50 100 150 200 250 300 ramp up 100 s max 50 100 150 200 250 300 ramp down 6 k/s (max) 3 k/s (max) 25 ?c 30 s max 260 ?c +0 ?c -5 ?c 245 ?c 5 ?c 240 ?c 255 ?c 217 ?c maximum solder profile recommended solder profile 235 ?c -0 ?c +5 ?c minimum solder profile 10 s min ohly0598 0 0 50 100 150 200 250 50 100 150 200 250 300 t t c s 235 c 10 s c ... 260 1. welle 1. wave 2. welle 2. wave 5 k/s 2 k/s ca 200 k/s cc ... 130 100 2 k/s zwangskhlung forced cooling normalkurve standard curve grenzkurven limit curves
sfh 3201 2007-03-30 9 published by osram opto semico nductors gmbh wernerwerkstrasse 2, d-93049 regensburg www.osram-os.com ? all rights reserved. the information describes the type of component and shall not be considered as assured characteristics. terms of delivery and rights to change design reserv ed. due to technical requirements components may contain dangerous substances. for information on the types in question please contact our sales organization. packing please use the recycling operators known to you. we can also help you ? get in touch with your nearest sales office. by agreement we will take packing material back, if it is sorted. you must bear the costs of tr ansport. for packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. components used in life-support devices or system s must be expressly authorized for such purpose! critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of osram os. 1 a critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support de vice or system, or to affect its safety or effectiveness of that device or system. 2 life support devices or systems are intended (a) to be impl anted in the human body, or (b) to support and/or maintain and sustain human life. if they fail, it is reasonable to assume that the health of the user may be endangered.
|
