1 new 2006.2 features 1. low profile on the pcb when mounted on the pcb surface the receptacle height is 2.0 mm. 2. strong construction use of metal shell and advanced plastics guarantees that fully mated connectors will withstand 30 n max. force applied on the plug in any direction. 3. high durability 5000 mating/un-mating cycles without any degradation of electrical or mechanical performance. tactile sensation when mating confirms complete mated condition and assures secure retention of the plug. 4. sequenced contact mating the protection of the circuit is assured by having the 2 contact at each end of the receptacle protrude forward by 0.5 mm, with electrical wipe of 1.45 mm. location of the circuit protection contacts can be changed as required. remaining contacts electrical wipe is 0.95 mm. 5. incorrect insertion prevention connectors will not be damaged when angled or reverse plug insertion is attempted. 6. safety plug release plug will release when an excessive pull force is applied to the cable. 7. rohs compliant all components and materials comply with the requirements of the eu directive 2002/95/ec. 2.9 existing 3200 series LX series 2 30n 30n overview hiroses next generation of interface connectors further reduces the mounting height of the receptacle by approximately 30% (compared with the 3200 series receptacle). high durability, secure mating, electrostatic protection and ease of operation guarantees reliable and consistent performance in demanding consumer applications. angled insertion reversed insertion ultra low-profile interface connectors with 2.0 mm mounting height LX series lower profile strong construction incorrect insertion prevention the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
2 product specifications series number : LX termination type 40 : solder type 60 : right angle smt number of contacts : 12, 16, 20 contact type p : male contact (plug) s : female contact (receptacle) 1 2 3 4 materials / finish insulator contacts shell synthetic resin copper alloy stainless steel black contact area: gold plated termination area: gold flash plated soldering area: gold flash plated ul94v-0 -------------- -------------- component material finish/color remarks note : includes temperature rise caused by current flow. ordering information - s 16 60 LX 1 2 3 4 - p 16 40 LX 1 2 3 4 receptacles plugs ratings current rating voltage rating 0.5a (1a max. can be carried via 2 random contacts) 50v ac operating temperature range : C40? to +70? storage temperature range : C55? to +85? (note) plugs receptacles insulator contacts metal shield covers strain relief clamp self tapping screws synthetic resin copper alloy stainless steel synthetic resin copper alloy steel black contact area: gold plated mounting area: gold flash plated -------------- black -------------- trivalent black chromate ul94v-0 -------------- -------------- ul94v-0 -------------- screw size: m2 component material finish/color remarks 70m? max. 1000 m? min. (dry) 10 m? min. (high humidity) no flashover or insulation breakdown. mating: 10n max., un-mating: 4n min. contact resistance: 20m? max. no electrical discontinuity of 1 sec. max. contact resistance: 20m? max. contact resistance: 20m? max. insulation resistance: 10m? min. contact resistance: 20m? max. insulation resistance: 10m? min. no corrosions 100ma dc 100v dc 250v ac / one minute with corresponding connector. 5, 000 times acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles, 3 axis. frequency: 10 to 55 hz, single amplitude of 0.75 mm, acceleration of 98 m/s 2 , 2 hours, 3 axis. temperature: C 55? ? +5? to +35? ? +85? ? +5? to +35? time : 30 ? 5 ? 30 ? 5 (minutes) 5% water solution at 35c for 48 hours 1.contact resistance 2.insulation resistance 3. withstanding voltage 4. mating/un-mating forces 5. durability (mating/un-mating) 6. shock 7. vibration 8. temperature cycle 9. salt spray characteristic specification conditions the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
3 receptacles part number cl no. packaging rohs LX60-12s LX60-16s LX60-20s cl245-0018-3 cl245-0001-0 cl245-0016-8 reel packaging (2000 pieces/reel) yes ?1 4 2.55 (5.5) p=0.5 10.6 no.12 2 no.1 0.8 r0.5 6.5 (5.5) p=0.5 0.35 1.2 0.3 5.7 1.9 1.9 4 2.8 2-?1.1 hole 6.5 7.8 1.5 3.8 no conductive traces in this area land area pcb edge b recommended pcb mounting pattern 12 pos. p=0.5 (7.5) 5 0.8 2 2.55 ?1 no.1 r0.5 12.6 no.16 6.5 no conductive traces in this area land area (7.5) p=0.5 0.35 pcb edge 9.8 8.5 3.8 0.3 5.7 1.9 1.2 1.9 5 2.8 2-?1.1 hole 1.5 b recommended pcb mounting pattern 16 pos. (9.5) p=0.5 0.8 ?1 r0.5 6.5 2.55 6.7 14.6 no.20 2 no.1 1.2 (9.5) p=0.5 0.35 pcb edge 3.8 0.3 5.7 1.9 1.9 7 2.8 2-?1.1 hole 10.5 11.8 1.5 no conductive traces in this area land area b recommended pcb mounting pattern 20 pos. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
4 * cable with overmolded bushing shown for reference only. not supplied. plugs part number cl no. packaging rohs LX40-12p LX40-16p LX40-20p cl245-0019-0 cl245-0002-3 cl245-0017-0 1 yes 12 pos. 16 pos. 20 pos. ?5.9 14.8 (r3.2) 6.2 21.4 (r1.4) no.12 8 5.1 no.1 no.1 (r1.4) 16.8 (r3.8) 21.4 6.2 ?6.4 no.16 8 5.1 21.4 6.2 (r1.4) (r3.8) 18.8 ?6.9 5.5 8.4 no.20 no.1 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
5 b receptacle packaging specifications embossed carrier tape dimensions reel dimensions 4 c unreeling directions 4 2 ? 1.5 b 1.75 a (inside dimension) (outside dimension) unreeling directions ? 380 ? 80 d e 30 ?13 part number d e LX60-12s LX60-16s LX60-20s 25.5 29.5 (mm) part number a b c LX60-12s LX60-16s LX60-20s 24 12 (mm) 11.5 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
6 receptacles recommended temperature profile b applicable plug cable b mated condition dimensions cable diameter wire size part number ?40.1 ?4.50.1 ?50.1 ?0.6 mm max. (awg 30 to 32 or equivalent) LX40-12p LX40-16p LX40-20p note 1: applicable cable sizes are guidelines. (there may be slight differences depending on the cable outer insulation) note 2: cables must be attached using single piece overmolded bushings on the cable. note 3: please refer to applicable cable termination procedures manual for correct plug assembly and cable termination. note 4: contact hrs for cable assemblies. (?) 250 200 150 100 50 180? 150? 230? min. 9030s 9010s peak:250 ? +5 0 0.5 plug 2 1.4 (mm) receptacle 2 hrs test conditions solder composition paste, 96.5%sn/3.0%ag/0.5%cu test board glass epoxy 35mm x 35mm x 0.8mm thick the temperature profiles are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. contact your solder paste and equipment manufacture for specific recommendations. (mm) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
