View ASMT-JN33-NUU01_7148280.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

asmt-jx33 3w mini power led light source data sheet description the 3w mini power led light source is a high perfor- mance energy e?cient device which delivers high ?ux output and possesses high color rendering index. this device can handle high driving current. option with elec- trically isolated metal slug is also available. the white mini power led is available in the range of color temperature from 2700k to 10000k. the low pro?le package design and ultra small footprint is suitable for a wide variety of applications especially where space and height is a constraint. the package is compatible with re?ow soldering process. to facilitate easy pick & place assembly, the leds are packed in eia-compliant tape and reel. features ? high color rendering index (cri) ? available in cool white, neutral white and warm white ? small footprint and low pro?le ? symmetrical outline ? energy e?cient ? direct heat transfer from metal slug to mother board ? compatible with re?ow soldering process ? high current operation ? long operation life ? wide viewing angle ? silicone encapsulation ? non-esd sensitive (threshold > 16kv) ? msl 1 products applications ? retail lighting ? display case lighting ? security lighting ? commercial lighting such as window decorative lighting in shopping malls ? architectural lighting caution: customer is advised to keep the leds in the mbb when not in use as prolonged exposure to environment might cause the silver plated leads to tarnish, which might cause di?culties in soldering.
2 package dimensions notes: 1. all dimensions in millimeters. 2. tolerance is 0.1 mm unless otherwise speci?ed. 3. terminal ?nish: ag plating. 4. corresponding nc (no connection) leads adjacent to anode and cathode leads can be electrically short. figure 1. asmt-jx33 package outline drawing 5.0 4.0 4.0 0.7 1.0 0.3 1.85 ? 3.7 0.8 0.65 0.60 ? 1.70 body cathode lead lens cathode mark anode lead nc nc nc nc metal slug
3 part numbering system device selection guide (t j = 25c) part number color luminous flux (im), v [1,2] test current (ma) dice technology electrically isolated metal slug min. typ. max. asmt-jw33-nsu01 cool white 51.7 70.0 99.6 350 ingan yes asmt-jn33-nsu01 neutral white 51.7 70.0 99.6 350 ingan yes asmt-jy33-nqs01 warm white 30.6 45.0 67.2 350 ingan yes notes: 1. v is the total luminous ?ux output as measured with an integrating sphere at 25ms mono pulse condition. 2. flux tolerance is 10% absolute maximum ratings parameter ingan units dc forward current [1] 700 ma power dissipation 3010 mw led junction temperature 135 c operating metal slug temperature range at 350 ma -40 to +120 c operating metal slug temperature range at 700 ma -40 to +105 c storage temperature range -40 to + 120 c soldering temperature refer to figure. 12 reverse voltage [2] not recommended notes: 1. derate linearly based on figure 8. 2. not designed for reverse bias operation. note: 1. please refer to page 7 for selection details. asmt- j x 1 33 C n x 2 x 3 x 4 x 5 packaging option color bin selection maximum flux bin selection minimum flux bin selection color w C cool white n C neutral white y C warm white
4 optical characteristics at 350 ma (t j = 25c) part number color correlated color temperature, cct (kelvin) viewing angle, 2 ? [1] () luminous e?ciency (lm/w) color rendering index, cri min. max. typ. typ. typ. asmt-jw33-nsu01 cool white 4500 10000 140 63 80 asmt-jn33-nsu01 neutral white 3500 4500 140 63 80 asmt-jy33-nqs01 warm white 2700 3500 140 40 90 note: 1. ? is the o?-axis angle where the luminous intensity is ? the peak intensity. electrical characteristic at 350 ma (t j = 25c) dice type forward voltage, v f (volts) thermal resistance, r j?ms (c/w) [1] min. typ max. typ. ingan 2.8 3.2 3.5 9 note: 1. r j?ms is thermal resistance from led junction to metal slug. optical and electrical characteristic at 700 ma (t j = 25c) part number color luminous flux (lm), v forward voltage, v f (volts) typ. typ. asmt-jw33-nsu01 cool white 125.0 3.6 asmt-jn33-nsu01 neutral white 125.0 3.6 asmt-jy33-nqs01 warm white 80.0 3.6
5 figure 2. relative intensity vs. wavelength for cool white and warm white figure 3. relative luminous flux vs. mono pulse curren t figure 4. forward current vs. forward voltage figure 5. radiation pattern for cool white, warm white and neutral white figure 6. relative light output vs. junction temperature figure 7. forward voltage shift vs. junction temperature -0.25 -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20 0.25 -50 -25 0 25 50 75 100 125 150 junction temperature, t j -c forward voltage shift - v (normalized at 25c) 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 0 100 200 300 400 500 600 700 mono pulse current - ma relative luminous flux (normalized at 350 ma) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 -90 -60 -30 0 30 60 90 angular displacement - degrees normalized intensity 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 80.0 90.0 100.0 110.0 120.0 130.0 -50 -25 0 25 50 75 100 125 150 junction temperature, t j -c relative light output - % (normalized at 25c) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 380 430 480 530 580 630 680 730 780 wavelength - nm relative intensity warm white neutral white cool white 0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 0 0.5 1 1.5 2 2.5 3 3.5 4 forward voltage - v forward current - ma
6 figure 8. maximum forward current vs. ambient temperature. derated based on t jmax = 125c, r j-a = 20c/w, 25c/w and 30c/w figure 9. maximum forward current vs. metal slug temperature. derated based on t jmax = 125c, r j-ms = 9c/w figure 10. recommended soldering land pattern solder pad solder pad slug indepdent 0.80 0.85 1.75 1.32 ? 1.90 3.50 5.20 figure 11. recommended pick and place nozzle tip. inner diameter = 3.2 mm (acc. to j-std-020c) 217c 200c 60 - 120 sec. 6c/sec. max. 3c/sec. max. 3c/sec. max. 150c 255 - 260c 100 sec. max. 10 - 30 sec. time temperature figure 12. recommended re?ow soldering pro?le note: for detail information on re?ow soldering of avago surface mount leds, do refer to avago application note an1060 surface mounti ng smt led indicator components. ? 3.2 0 100 200 300 400 500 600 700 800 0 20 40 60 80 100 120 140 ambient temperature, t a - c max allowable dc current - ma r j-a = 20c/w r j-a = 25c/w r j-a = 30c/w 0 100 200 300 400 500 600 700 800 0 20 40 60 80 100 120 140 metal slug temperature, t ms - c max allowable dc current - ma r j-ms = 9c/w
7 option selection details asmt-j x 1 33 C n x 2 x 3 x 4 x 5 x 2 C minimum flux bin selection x 3 C maximum flux bin selection x 4 C color bin selection x 5 C packaging option flux bin limit [x 2 , x 3 ] bin id luminous flux (lm) at 350 ma min. max. q 30.6 39.8 r 39.8 51.7 s 51.7 67.2 t 67.2 87.4 u 87.4 99.6 tolerance for each bin limits is 10% cool white selection bin id 0 full distribution h un, vn, u0 and v0 j wn, vn, w0 and v0 k xn, wn, x0 and w0 p y0 w arm white selection bin id 0 full distribution h m1, n1, m0 and n0 j p1, n1, p0 and n0 k q1, p1, q0 and p0 neutral white selection bin id 0 full distribution g s1, r1, s0 and r0 h tn, s1, t0 and s0 color bin selection [x 4 ] individual reel will contain parts from one color bin selection only.
8 figure 13. color bin structure for cool whit e figure 14. color bin structure for warm white figure 15. color bin structure for neutral white 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 x-coordinate y-coordinate 10000k 7000k 6300k y0 un u0 v0 vn x0 xn w0 wn black body curve 5650k 5000k 4500k 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.38 0.40 0.42 0.44 0.46 0.48 0.50 x-coordinate y-coordinate q1 q0 p0 p1 m0 m1 n0 n1 3500k 3250k 3050k 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.34 0.36 0.38 0.40 0.42 0.44 x-coordinate y-coordinate r1 r0 t0 s1 tn s0 3800k black body curve 2850k 2700k 4500k 4100k 3500k black body curve
9 color bin limits cool white color limits (chromaticity coordinates) bin un x y 0.365 0.386 0.362 0.372 0.346 0.359 0.347 0.372 bin u0 x y 0.362 0.372 0.360 0.357 0.344 0.344 0.346 0.359 bin vn x y 0.329 0.345 0.329 0.357 0.347 0.372 0.346 0.359 bin v0 x y 0.329 0.331 0.329 0.345 0.346 0.359 0.344 0.344 bin wn x y 0.329 0.345 0.316 0.333 0.315 0.344 0.329 0.357 bin w0 x y 0.329 0.345 0.329 0.331 0.317 0.320 0.316 0.333 bin xn x y 0.305 0.322 0.303 0.333 0.315 0.344 0.316 0.333 bin x0 x y 0.308 0.311 0.305 0.322 0.316 0.333 0.317 0.320 bin yo x y 0.308 0.311 0.283 0.284 0.274 0.301 0.303 0.333 tolerance: 0.01 warm white color limits (chromaticity coordinates) bin m1 x y 0.460 0.430 0.453 0.416 0.467 0.419 0.473 0.432 bin m0 x y 0.453 0.416 0.444 0.399 0.459 0.403 0.467 0.419 bin n1 x y 0.444 0.426 0.438 0.412 0.453 0.416 0.460 0.430 bin n0 x y 0.438 0.412 0.429 0.394 0.444 0.399 0.453 0.416 bin p1 x y 0.430 0.421 0.424 0.407 0.438 0.412 0.444 0.426 bin p0 x y 0.424 0.407 0.416 0.389 0.429 0.394 0.438 0.412 bin q1 x y 0.414 0.414 0.409 0.400 0.424 0.407 0.430 0.421 bin q0 x y 0.409 0.400 0.402 0.382 0.416 0.389 0.424 0.407 tolerance: 0.01 neutral white color limits (chromaticity coordinates) bin r1 x y 0.414 0.414 0.409 0.400 0.392 0.391 0.397 0.406 bin r0 x y 0.392 0.391 0.387 0.374 0.402 0.382 0.409 0.400 bin s1 x y 0.397 0.406 0.392 0.391 0.378 0.382 0.382 0.397 bin s0 x y 0.392 0.391 0.387 0.374 0.374 0.366 0.378 0.382 bin tn x y 0.382 0.397 0.378 0.382 0.362 0.372 0.365 0.386 bin t0 x y 0.378 0.382 0.374 0.366 0.360 0.357 0.362 0.372 tolerance: 0.01 example asmt-jw33-nsu01 asmt-jw33-nxxxx C cool white, ingan, electrically isolated heat sink x 2 = s C minimum flux bin s x 3 = u C maximum flux bin u x 4 = 0 C full distribution x 5 = 1 C tape and reel option packaging option [x 5 ] selection option 1 tape and reel
10 tape and reel C option 1 figure 16. carrier tape dimensions notes: 1. empty component pockets sealed with top cover tape. 2. 250 or 500 pieces per reel. 3. drawing not to scale. 4. all dimensions are in millimeters. figure 17. reel dimensions 178 1 4 0.5 5 0.5 3 0.5 ? 21.0 0.5 ? 10 ? 13.1 0.5 ? 60 0.5 13.2 .5 16.0 .5 4.00 .10 8.00 .10 12.00 +.30 ?.10 4.15 .10 0.25 0.02 2.05 .10 8 ? 1.5 0.25 2.00 .05 5.50 .05 1.75 0.01 0.25 0.02 2.01 0.1 ? 1.5 0.1 5 5.25 .10
disclaimer: avagos products and software are not speci?cally designed, manufactured or authorized for sale as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear facility or for use in medical devices or applications. customer is solely responsible, and waives all rights to make claims against avago or its suppliers, for all loss, damage, expense or liability in connection with such use. for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005-2010 avago technologies. all rights reserved. av02-2430en - june 24, 2010 cathode side user feed direction printed label figure 18. reeling orientation

▲Up To Search▲

Price & Availability of ASMT-JN33-NUU01

	To Download ASMT-JN33-NUU01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .