611 industrial way west, eatontown, nj 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com reflective switches absorptive switches frequency insertion insertion switching range part loss vswr isolation part loss vswr isolation speed max rf (ghz) number (db max) (max) (db min) number (db max) (max) (db min) (nsec max) (w cw) 0.01 ? 0.1 s1h1r 0.8 1.5 75 s1h1 0.9 1.5 80 250 1 0.01 ? 0.5 s1h2r 0.9 1.5 75 s1h2 1.0 1.5 80 250 1 0.01 ? 1 s1h3r 1.2 1.5 75 s1h3 1.3 1.5 80 250 1 0.01 ? 2 s1h4r 1.8 1.6 75 s1h4 1.9 1.6 80 250 1 0.01 ? 4 s1h5r 2.5 1.8 75 s1h5 2.6 1.8 80 250 1 0.1 ? 0.5 s1v1r 0.9 1.5 80 s1v1 1.0 1.5 80 250 1 0.1 ? 1 s1v2r 1.2 1.5 80 s1v2 1.3 1.5 80 250 1 0.1 ? 2 s1v3r 1.8 1.6 80 s1v3 1.9 1.6 80 250 1 0.1 ? 4 s1v4r 2.5 1.8 75 s1v4 2.8 1.8 80 250 1 0.1 ? 8 s1v5r 3.2 2.0 70 s1v5 3.3 2.0 75 250 1 0.1 ? 10 s1v6r 3.5 2.0 70 s1v6 3.6 2.0 75 250 1 0.5 ? 1 s1u1r 1.0 1.5 80 s1u1 1.1 1.5 80 100 1 0.5 ? 2 s1u2r 1.4 1.6 80 s1u2 1.5 1.6 80 100 1 0.5 ? 4 s1u3r 2.0 1.8 75 s1u3 2.1 1.8 80 100 1 0.5 ? 6 s1u4r 2.2 1.9 70 s1u4 2.3 2.0 75 100 1 0.5 ? 12 s1u5r 2.5 2.0 65 s1u5 2.7 2.0 70 100 1 0.5 ? 18 s1u6r 2.8 2.0 60 s1u6 3.0 1.9 65 100 0.5 1 ? 2 s1l1r 0.8 1.5 80 s1l1 0.9 1.5 85 100 1 1 ? 4 s1l2r 1.1 1.6 80 s1l2 1.2 1.6 85 100 1 1 ? 8 s1l3r 1.8 1.8 75 s1l3 1.9 1.8 80 100 1 1 ? 10 s1l4r 1.9 2.0 70 s1l4 2.0 2.0 75 100 1 1 ? 12 s1l5r 2.0 2.0 65 s1l5 2.2 2.0 70 100 1 1 ? 14 s1l6r 2.2 2.0 65 s1l6 2.4 2.0 70 100 0.5 1 ? 18 s1l7r 2.7 2.0 60 s1l7 3.0 2.0 65 100 0.5 2 ? 4 s1s1r 1.0 1.6 70 s1s1 1.1 1.6 75 100 1 2 ? 6 s1s2r 1.3 1.7 70 s1s2 1.4 1.7 75 100 1 2 ? 8 s1s3r 1.7 1.8 70 s1s3 1.8 1.8 75 100 1 2 ? 10 s1s4r 1.8 1.8 70 s1s4 2.0 1.8 70 100 1 2 ? 12 s1s5r 2.0 1.9 65 s1s5 2.2 1.9 70 100 1 2 ? 16 s1s6r 2.5 2.0 60 s1s6 2.7 2.0 65 100 0.5 2 ? 18 s1s7r 2.7 2.0 60 s1s7 3.0 2.0 65 100 0.5 4 ? 8 s1c1r 1.1 1.6 70 s1c1 1.8 1.6 75 100 1 4 ? 10 s1c2r 1.2 1.7 70 s1c2 2.0 1.7 70 100 1 4 ? 12 s1c3r 1.5 1.8 65 s1c3 2.2 1.8 70 100 1 4 ? 16 s1c4r 1.9 2.0 60 s1c4 2.7 2.0 65 100 0.5 4 ? 18 s1c5r 2.0 2.0 60 s1c5 2.8 2.0 65 100 0.5 6 ? 10 s1c6r 1.2 1.7 70 s1c6 2.0 1.7 70 100 1 6 ? 12 s1c7r 1.5 1.8 65 s1c7 2.2 1.8 70 100 1 6 ? 18 s1c8r 2.0 2.0 60 s1c8 2.8 2.0 65 100 0.5 8 ? 10 s1x1r 1.2 1.7 70 s1x1 1.9 1.7 70 100 1 8 ? 12 s1x2r 1.5 1.8 65 s1x2 2.2 1.8 70 100 1 8 ? 18 s1x3r 2.0 2.0 60 s1x3 2.8 2.0 65 100 0.5 10 ? 18 s1k1r 2.0 2.0 60 s1k1 2.8 2.0 65 100 0.5 12 ? 18 s1k2r 2.0 2.0 60 s1k2 2.8 2.0 65 100 0.5 the s1 series of single pole, single throw pin diode switches span the frequency range of 10mhz to 18ghz and are available with absorptive or reflective inputs. the switches are available in a wide variety of standard frequency ranges from cost-effective narrowband to high- performance broadband. each switch incorporates a ttl-compatible driver for convenient system integration and operates from +5v and - 12v to -18v dc power supplies. all switches incorporate dc blocks at the rf ports. standard screened switches incorporate epoxy sealed lids and undergo a stringent yet cost effective screening cycle. the switches are also available with hermetic seal and high-rel screening for military and aerospace applications. applications: ? ew systems ? test equipment ? communications systems ? electronic simulators ? modulators single-pole, single-throw switches
611 industrial way west, eatontown, nj 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com notes: mechanical specifications: dc bias: +5v +/-0.5v @ 50ma max case style: s1 outline (standard) -15v +/-3v @ 50ma max finish: gold plate per mil-g-45204, chem film per mil-c-5541 bias & control pins: ?0.02? x 0.15? long dc bias: +5v +/-0.5v @ 60ma max weight: 20g max (-5 option) -5v +/-0.5v @ 60ma max mounting: ?0.10? through holes (4) places dc bias: +15v +/-3v @ 50ma max (-12 option) -15v +/-3v @ 50ma max control: ttl 0 = low loss ttl 1 = isolation absorptive switch: 50 terminations at both rf ports (in isolation mode). switching speed is defined as 50%ttl to 90% (t-on) and 50%ttl to 10%rf (t-off). environmental specificatio ns: screening: mil-e-5400, mil-std-202, mil-e-16400 internal visual per mil-std-883, method 2017 operating temp: -55c to +85c temperature cycle: -65c to +100c, 10 cycles storage temp: -65c to +125c humidity: mil-std-202f, m103, cond b hermetically-sealed switches are fine and gross leak checked shock: mil-std-202f, m213, cond b per mil-std-883, method 1014. altitude: mil-std-202f, m105, cond b vibration : mil-std-202f, m204, cond b optional high-rel screening available upon request. thermal shock: mil-std-202f, m107, cond a contact the factory to discuss your screening requirements. temperature cycle: mil-std-202f, m105c, cond d j1 acc e1 g +5v -15v j2 outline case style s1 s1-0109 custom options ? contact factory: ? gray epoxy paint per mil-c-22750 ? video transient suppression ? gpo connectors ? ecl logic input ? phase and amplitude matching ? other frequency ranges available from 1mhz to 26ghz ? reversed logic ? available without sma connectors for drop-in applications ? high rel screening part number ordering information: ? add ?-rc? suffix: rohs-compliant ? add ?-5? suffix: +/-5v dc supplies ? add ?-5-rc? suffix: +/-5v dc supplies, rohs-compliant ? add ?-12? suffix: +/-12v to 18v dc supplies ? add ?-12-rc? suffix: +/-12v to 18v dc supplies, rohs-compliant ? add ?-h? suffix: hermetic seal (does not apply to rohs-compliant models)
|
