baq33 / 34 / 35 document number 85537 rev. 1.7, 09-dec-05 vishay semiconductors www.vishay.com 1 94 9371 small signal switching diodes, low leakage current features ? silicon planar diodes ? very low reverse current ? lead (pb)-free component ? component in accordance to rohs 2002/ 95/ec and weee 2002/96/ec applications protection circuits, time delay circuits, peak follower circuits, logarit hmic amplifiers mechanical data case: minimelf glass case (sod-80) weight: approx. 31 mg cathode band color: black packaging codes/options: gs18 / 10 k per 13" reel (8 mm tape), 10 k/box gs18 / 10 k per 13" reel (8 mm tape), 10 k/box parts table absolute maximum ratings t amb = 25 c, unless otherwise specified thermal characteristics t amb = 25 c, unless otherwise specified part type differentiation ordering code remarks baq33 v rrm = 40 v baq33-gs18 or baq33-gs08 tape and reel baq34 v rrm = 70 v baq34-gs18 or baq34-gs08 tape and reel baq35 v rrm = 140 v BAQ35-GS18 or baq35-gs08 tape and reel parameter test condition part symbol value unit reverse voltage baq33 v r 30 v baq34 v r 60 v baq35 v r 125 v peak forward surge current t p = 1 s i fsm 2a forward current i f 200 ma parameter test condition symbol value unit thermal resistance junction to ambient air on pc board 50 mm x 50 mm x 1.6 mm r thja 500 k/w junction temperature t j 175 c storage temperature range t stg - 65 to + 175 c e2
www.vishay.com 2 document number 85537 rev. 1.7, 09-dec-05 baq33 / 34 / 35 vishay semiconductors electrical characteristics t amb = 25 c, unless otherwise specified typical characteri stics (tamb = 25 c unless otherwise specified) parameter test condition part symbol min ty p. max unit forward voltage i f = 100 ma v f 1v reverse current e 300 lx, rated v r i r 13na e 300 lx, rated v r , t j = 125 c i r 0.5 a e 300 lx, v r = 15 v baq33 i r 0.5 1 na e 300l x, v r = 30 v baq34 i r 0.5 1 na e 300 lx, v r = 60 v baq35 i r 0.5 1 na breakdown voltage i r = 5 a, t p /t = 0.01, t p = 0.3 ms baq33 v (br) 40 v i r = 5 a, t p /t = 0.01, t p = 0.3 ms baq34 v (br) 70 v baq35 v (br) 140 v diode capacitance v r = 0, f = 1 mhz c d 3pf figure 1. reverse current vs. junction temperature figure 2. forward current vs. forward voltage 040 8 0 120 160 1 10 100 1000 10000 i - rever s ec u rrent (na) r t j -j u nction temper a t u re (c) 200 94 9079 s c a ttering limit v r =v rrm 0 0.4 0.8 1.2 1.6 0.1 1 10 100 1000 i - forward current (ma) f v f - forward voltage (v) 2.0 94 9078 scattering limit t j =25 c
baq33 / 34 / 35 document number 85537 rev. 1.7, 09-dec-05 vishay semiconductors www.vishay.com 3 package dimensions in mm (inches) 96 12070 3.7 (0.144) 3.3 (0.129) 0.47 max. (0.02) cathode indification 2.50 (0.098) max 5 (0.197) ref 1.25 (0.049) min 2 (0.079) min mounting pad layout iso method e 1.6 (0.062) 1.4 (0.055)
www.vishay.com 4 document number 85537 rev. 1.7, 09-dec-05 baq33 / 34 / 35 vishay semiconductors ozone depleting substances policy statement it is the policy of vishay semiconductor gmbh to 1. meet all present and future national and international statutory requirements. 2. regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. it is particular concern to control or eliminate rele ases of those substances in to the atmosphere which are known as ozone depleting substances (odss). the montreal protocol (1987) and its london amendments (1990) intend to severely restrict the use of odss and forbid their use within the next ten years. various national and international initiatives are pressing for an earlier ban on these substances. vishay semiconductor gmbh has been able to use its po licy of continuous improvements to eliminate the use of odss listed in the following documents. 1. annex a, b and list of transitional substances of the montreal protocol and the london amendments respectively 2. class i and ii ozone depleting substances in the clean air act amendments of 1990 by the environmental protection agency (epa) in the usa 3. council decision 88/540/eec and 91/690/eec annex a, b and c (transitional substances) respectively. vishay semiconductor gmbh can certify that our semi conductors are not manufactured with ozone depleting substances and do not co ntain such substances. we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications. all operating parameters must be validated for each customer application by the customer. should the buy er use vishay semiconductors products for any unintended or unauthorized application, the buyer sh all indemnify vishay semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. vishay semiconductor gmbh, p.o.b. 3535, d-74025 heilbronn, germany
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
