eight color-coded mechanical key positions meets tia/eia-568-b requirements keyed connectors and adapters full solution availability prevents mismatch of networks optimum optical performance front and rear security in network panel various network applications features and benefits | corning cable systems keyed lc connector solution offers mechanical network security for organizations desiring to segregate networks due to privacy or security concerns. utilizing the lc small-form-factor (sff) format for optical fiber cabling, the keyed lc solution provides physical separation for up to eight networks, applications or organizations. eight color-coded key combinations prevent inadvertent or unauthorized access to networks and provide fast and easy network identification. keyed connectors on the front and back of the patch panel area are used to match access rights to the proper network. the keyed features cannot be duplicated with standard lc components, thereby preventing violation of network security. the sff lc connector allows high-density deployment in less space than sc or st ? compatible connectors and supports up to 288 fibers in a 4u rack-mountable housing. the keyed lc connector solution is available in single-mode, 62.5 m multimode, standard 50 m and laser-optimized 50 m multimode. ideal for research labs and secure government facilities, a full solution is (continued) keyed lc connectors | photo lan758 keyed lc connector solution a lanscape ? solutions product | preterminated systems | cables | connectors | cable assemblies | hardware | tool kits and accessories | test equipment | splice equipment | fan-out kits | traini ng | specification sheet lan-701-en | page 1 keyed lc connectors | photo lan1289
specification sheet lan-701-en | page 2 keyed lc connector solution a lanscape ? solutions product available, from factory-installed keyed lc connectors for assemblies and plug & play ? universal systems modules, to field-installable unicam ? connectors and anaerobic keyed lc connectors, to adapters loaded into standard lanscape ? solutions panels and modules. unicam ? connector ? no epoxy, no polish ? no need for electrical power for ovens or lights ? quick installation: less than one minute per connector ? 100 percent factory tested for insertion loss (0.1 db insertion loss) ? fast termination, high installation yields and no consumables means lowest cost ? factory-polished end-face for consistent optical performance and factory-built jumper quality ? continuity test set gives immediate go/no-go feedback of successful termination ? utilizes standard unicam ? pretium ? connector tool kit for installation so no additional materials required ? reliable, proven technology with more than 45 million units sold since 1993 anaerobic connector ? fast cure anaerobic adhesive; does not require electrical power for lamps or ovens ? hand polish; does not require polishing machine ? reduced installation time; single-strike crimp solution ensures less than three minutes assembled and polished ? average 0.2 db insertion loss with physical contact polish cable assemblies ? complete line of single-fiber jumpers to high-fiber- count assemblies available with keyed lc to all connector types ? state-of-the-art manufacturing process ensures consistent performance and tightly controlled end-face geometry ? 100 percent factory tested cch adapter panels ? universal approach is used; one panel size fits in all standard lanscape ? solutions hardware (for example, cch, pch, ccs, wch, ich, edc, fzb) ? adapters are keyed on both sides to provide total network security cch pigtail modules ? compatible with pch and cch lanscape solutions rack-mountable housing ? offers greater protection to optical cables and connectors ? provided with factory-installed and -tested 3 m pigtails ? available with mic ? cable or ribbon pigtail types plug & play ? universal systems modules ? factory-terminated solutions for improved system performance, component compatibility and consistent quality ? universal and classic wired modules enable fast and simple networking moves, adds and changes without polarity concerns associated with special polarity-compensating components
| preterminated systems | cables | connectors | cable assemblies | hardware | tool kits and accessories | test equipment | splice equipment | fan-out kits | traini ng | keyed lc connector solution a lanscape ? solutions product specification sheet lan-701-en | page 3 95 - - k | 1 select fiber type. 000 = 62.5 m 050 = 50 m 05x = laser-optimized 50 m 200 = single-mode see note 1. | 2 select keyed lc style. n = blue b = black r = red s = slate y = yellow e = orange g = green p = rose | 1 | 2 unicam ? connectors part number example part number 95-05x-kn description keyed lc unicam ? connector, laser-optimized 50 m, blue ordering information | 95 - - 98 - sp - k | 1 select fiber type. 101 = 62.5 m 051 = 50 m 201 = single-mode | 2 select keyed lc style. n = blue b = black r = red s = slate y = yellow e = orange g = green p = rose | 1 | 2 anaerobic-cure keyed lc field-installable connectors part number example part number 95-101-98-sp-kn description keyed lc 62.5 m multimode connector, blue notes: 1) also available in z-paks. add -z to end of part number.
keyed lc connector solution a lanscape ? solutions product specification sheet lan-701-en | page 4 ordering information | (continued) single-fiber keyed lc connector assemblies | 1 select connector codes (two digits per code). 00 = no connectors (use when ordering a pigtail) multimode 39 = sc simplex, ceramic 57 = sc duplex, ceramic 50 = st ? compatible, ceramic 03 = lc simplex 05 = lc duplex 97 = mt-rj (no pins) 24 = keyed lc simplex 26 = keyed lc duplex single-mode 58 = sc upc simplex 72 = sc upc duplex 61 = st compatible upc 02 = lc upc simplex 04 = lc upc duplex 98 = mt-rj (no pins) 30 = keyed lc upc simplex 33 = keyed lc upc duplex see note 1. | 2 select fiber count. 01-96 see note 2. | 3 select fiber type. r = single-mode c = 50 m s = laser-optimized 50 m k = 62.5 m notes: 1) connector codes are based on the type of adapter used at the patch panel and the electronic interface connector. the connector and adapter must be compatible for a correct connection. always use the lowest code first when constructing the part number. 2) for fiber counts greater than 96, contact customer service. 3) ribbon interconnect cable option is only available for mt-rj connector assembly combinations. 4) for additional cable options, contact customer service. 5) for lengths greater than 999, contact customer service. | 6 select assembly length. 001-999 see note 5. | 7 select unit of measure. m = meters f = feet | 4 select cable type. 31z = single-fiber 2.0 mm riser 51z = zipcord 2.0 mm riser 81z = mic ? riser distribution cable (2.0 mm legs) j1z = ribbon interconnect riser see notes 3 and 4. | 5 select keyed lc connector style. n = blue b = black r = red s = slate y = yellow e = orange g = green p = rose | 1 | 2 | 3 | 4 | 5 | 6 | 7 corning cable systems patch cords and high-fiber-count assemblies are ordered using seven easy steps. the steps involve the selection of connec tor(s), cable and length. the format and steps are listed below.
| preterminated systems | cables | connectors | cable assemblies | hardware | tool kits and accessories | test equipment | splice equipment | fan-out kits | traini ng | keyed lc connector solution a lanscape ? solutions product specification sheet lan-701-en | page 5 cch - cp - k | 1 select fiber count. 12 = 12 fibers (6 duplex adapters) 24 = 24 fibers (12 duplex adapters) | 2 select keyed lc duplex adapter style and fiber type. 1 = blue h = orange 5 = red j = rose 9 = yellow k = black d = green l = slate | 1 | 2 connector panels part number example part number cch-cp12-k9 description cch connector panel with 6 keyed lc duplex adapters, yellow, laser-optimized ordering information | (continued) adp - kdlc - cc rf - c s | 1 select color of adapter. g = green e = orange n = blue p = rose r = red b = black y = yellow s = slate | 2 select fiber type. s = single-mode 5 = 50 m 6 = 62.5 m l = laser-optimized 50 m | 1 | 2 adapters part number example part number adp-kdlc-ccyrf-cls description lc duplex adapter, yellow, laser-optimized 50 m
specification sheet lan-701-en | page 6 ordering information | (continued) pigtailed module cch - rm - k - p 0 3 | 3 select cable type. mic ? cable subunit (standard fiber cable option) ch = multimode (50 m, standard) kh = multimode (62.5 m) rh = single-mode sh = multimode (50 m, laser-optimized) ribbon fiber cj = multimode (50 m) kj = multimode (62.5 m) rj = single-mode sj = multimode (50 m, laser-optimized) | 1 select fiber count. 12 = 12 fibers 24 = 24 fibers | 2 select keyed lc adapter and fiber type. 1 = blue h = orange 5 = red j = rose 9 = yellow k = black d = green l = slate | 1 | 2 | 3 a standard pigtail length is 3 m (9.842 ft). for lengths other than 3 m, please contact corning cable systems customer service at 800-743-2671. keyed lc connector solution a lanscape ? solutions product part number example part number cch-rm12-k1-p03kh description cch 12-fiber pigtail module with 6 keyed lc duplex blue adapters and a 3 m long mic ? cable subunit 62.5 m pigtail
specification sheet lan-701-en | page 7 | preterminated systems | cables | connectors | cable assemblies | hardware | tool kits and accessories | test equipment | splice equipment | fan-out kits | traini ng | keyed lc connector solution ordering information | (continued) plug & play ? keyed lc modules cch - m - - - | 1 select module type. u = universal r = classic see note 1. | 2 select fiber count. 12 = 12 fibers 24 = 24 fibers | 4 select mtp ? connector. 70 = multimode 89 = single-mode | 6 select keyed lc style. bl = blue rd = red yl = yellow gr = green or = orange ro = rose bk = black sl = slate | 3 select connector code. 26 = keyed lc multimode, duplex 33 = keyed lc single-mode, duplex | 5 select fiber type. k = multimode (62.5 m) c = multimode (50 m) s = multimode (50 m, laser-optimized) r = single-mode | 1 | 2 | 3 | 4 | 5 | 6 a lanscape ? solutions product part number example part number cch-um24-26-70c-yl description 24-fiber, standard 50 m multimode module with 12 yellow keyed lc duplex adapters notes: 1) default is universal. please note that classic and universal components are not compatible with each other.
specification sheet lan-701-en | page 8 tjk - sc - klc - - | 1 select keyed lc style. g = green e = orange n = blue p = rose r = red b = black y = yellow s = slate | 2 select jumper type. e = single-mode k = 62.5 m c = 50 m standard s = laser-optimized 50 m | 1 | 2 part number example part number tjk-sc-klc-g-k description keyed lc, green, 62.5 m multimode test jumper kit keyed lc connector solution a lanscape ? solutions product ordering information | (continued) test jumper kits test jumper kit with two sc to keyed lc test jumpers, one lc keyed to lc keyed test jumper, and two lc keyed adapters. select color code and fiber type. description unicam ? pretium ? tool kit, includes unicam pretium installation tool, pretium flat cleaver and all required fiber preparation and cleaning supplies installation kit for anaerobic-cure connectors, includes consumables for 500 connectors (keyed lc puck must be ordered separately) hand puck, lc, keyed crimp tool for lc heat-cure and anaerobic connectors duplex trigger with anti-snag feature for lc connectors (100/pack) C anaerobic only part number accessories tkt-unicam-pfc tkt-anaerobic2 2104495-01 3201032-01 trigger-bp-d ordering information | (continued) corning cable systems llc ? po box 489 ? hickory, nc 28603-0489 usa 800-743-2675 ? fax: 828-901-5973 ? international: +1-828-901-5000 ? www.corning.com/cablesystems corning cable systems reserves the right to improve, enhance and modify the features and specifications of corning cable system s products without prior notification. lanscape, mic and unicam are registered trademarks of corning cable systems brands, inc. plug & play and pretium are trademarks of cornin g cable systems brands, inc. st is a registered trademark of lucent technologies. mtp is a registered trademark of usconec ltd. all other trademarks are the properties of thei r respective owners. corning cable systems is iso 9001 certified. ? 2007, 2008 corning cable systems. all rights reserved. published in the usa. lan-701-en / december 2008
|
