125 5305 spectrum drive, frederick, md 21703-7362 tel: 301-846-9222, 800-638-2048 fax: 301-846-9116 web: www.aeroflex-weinschel.com email: weinschel-sales@aeroflex.com revision date: 7/8/08 programmable attenuators description aeroflex / weinschels 8310 and 8311series programmable attenuator units represent a new concept in programmable attenuation for bench test and subsystem applications. standard 8310 series designs house and control various aeroflex / weinschel programmable attenuator models (3200t, 150t, and 4200 series) via front panel controls or standard communications interfaces including gpib (ieee- 488) and rs-232/rs-422 /rs485. this series combines the features of the aeroflex / weinschel 8210a device controller with a front panel user interface to form a flexible, easy to use solution. most 8310 series are single channel configurations where rf signal is routed through either the front or rear mounted ports a & b but can be configured for up to four channels of attenuation, rf switching, amplification or other functions. multiple programmable attenuators can be used inconjuc- tion with other coaxial devices such as switches, power combiners, directional couplers, and filters creating single or multichannel subsystems. models 8310 & 8311 smartstep ? programmable attenuator units rs232\rs422/rs485 a new concept in programmable attenuation! features o provides a flexible, easy to program, low cost solution for your bench test/calibration setups and subsystem applications. o multi-channel attenuation paths (up to 4 input/outputs for 8310 & up to 6 input/outputs for 8311) o relative vs. nominal attenuation step function. o wide choice of frequency & attenuation ranges. - dc to 1, 2, 3, 6 & 18 ghz - new dc to 6 ghz models - up to 127 db - solid-state (gaas fet *& pin) - relay switched o 75 configurations o accuracy & repeatability. o designed to interface with aeroflex / weinschels line of digitally controlled programmable attenuators and other electromechanical devices. o designed to interface with industry standard communication interfaces: - gpib/ieee-488 (hs-488 ready) - rs-232, rs-422, rs-485 o rack configurable: the model 8310 or 8311 can be rack mounted either as a single unit using rack mounting kit (p/n 193-8033-1) or two model 8310's can be mounted together using rack mounting kit (p/n 193-8033-2). these kits fit into any rack or cabinet that is designed per eia rs-310 or mil-std-189. applications applications for the 8310 and 8311 series range from pro- viding control of a single programmable attenuator in a bench test/lab environment using a pc and a terminal emu- lator, to complex system applications where the 8310/8311 series are employed to control many devices to create cus- tom/ semi-custom subsystems to reduce overall design cost. aeroflex / weinschel can provide a variety of custom designed driver interfaces for various devices, such as rf switches, relays, pin attenuators, motorized step attenua- tors, displays, and other devices, as well as complete subsystem design and integration services. contact us with your specialized needs. for additional information on the model 8310, visit our website @ www.aeroflex-weinschel.com/8310.htm ieee-488 6 channel 19 rack size versions
5305 spectrum drive, frederick, md 21703-7362 tel: 301-846-9222, 800-638-2048 fax: 301-846-9116 web: www.aeroflex-weinschel.com email: weinschel-sales@aeroflex.com 126 revision date: 7/8/08 programmable attenuators input power requirements ac 100 to 240 vac, 50/60 hz, 50 watts environmental operating temperature 0 to +50c storage temperature: 67 to +167 f (-55 to +75c) humidity: 96% altitude: 40,000' (12,192m) ieee-488 bus connector: 24-pin per ieee-488.1 protocols: per ieee-488.2 indicators: remote (rmt), listen (lsn), talk (tlk), srq (srq) rs-232 bus connector: 9-pin male d signals: txd, rxd, rts, cts, dtr, gnd baud rates: 2400, 9600, 19200, and 38400 data bits: 8 handshaking: none, rts/cts, xon/xoff parity: none, odd, even indicators: tx (transmit) and rx (receive) rs-422 bus (3) connector: 9-pin male d rs-485 bus (4) signals: txd+, tdx-, rxd+, rtx-, rts+, rts-, cts+, cts-, and signal gnd baud rates: 2400, 9600, 19200, and 38400 data bits: 8 handshaking: none, rts/cts, xon/xoff parity: none, odd, even indicators: tx (transmit) and rx (receive) rf characteristics (5) see ordering guide (pg 120 through 122) 1. gpib/ieee-488 model allows user-selectable addresses. 2. rs-232 can be used with standard pc serial port for short and medium distances (up to approximately 50 ft). 3. rs-422, designed for very long distance communications (4000 ft) and & optimized as a single node protocol, typically with one device connected to a single port. 4. rs-485, designed for very long distance communications (4000 ft) & optimized for multi-drop connections that can used to create a low cost network. 5. refer to individual data sheet for detailed specifications on internal programmables. specifications specification description model no attenuation frequency insertion loss swr no of attenuator connector conn value (db) range (ghz) (maximum) (maximum) channels model no.* type location 8310-136-f 63.75/0.25 0.8-2.5 6.0 1.6 1 4228-63.75 n/f front 8310-136-r 63.75/0.25 0.8-2.5 6.0 1.6 1 4228-63.75 n/f rear 8310-136-2-f 63.75/0.25 0.8-2.5 6.0 1.6 2 4228-63.75 n/f front 8310-136-2-r 63.75/0.25 0.8-2.5 6.0 1.6 2 4228-63.75 n/f rear 8310-137-f 63/1 0.8-3.0 4.7 1.6 1 4226-63 n/f front 8310-137-r 63/1 0.8-3.0 4.7 1.6 1 4226-63 n/f rear 8310-137-2-f 63/1 0.8-3.0 4.7 1.6 2 4226-63 n/f front 8310-137-2-r 63/1 0.8-3.0 4.7 1.6 2 4226-63 n/f rear 8310-138-f 103/1 0.8-3.0 6.0 1.6 1 4228-103 n/f front 8310-138-r 103/1 0.8-3.0 6.0 1.6 1 4228-103 n/f rear 8310-138-2-f 103/1 0.8-3.0 6.0 1.6 2 4228-103 n/f front 8310-138-2-r 103/1 0.8-3.0 6.0 1.6 2 4228-103 n/f rear 8310-138-3-t 103/1 0.8-3.0 6.0 1.6 3 4228-103 n/f front/rear 8310-138-4-t 103/1 0.8-3.0 6.0 1.6 4 4228-103 n/f front/rear ordering guide...8310 series with 4200 programmables
model no attenuation frequency insertion loss swr no of attenuator connector conn value (db) range (ghz) (maximum) (maximum) channels model no.* type location 8310-201-f 70/10 dc-18.0 3.25 db 1.75 1 150t-70 sma/f front 8310-201-r 70/10 dc-18.0 3.25 db 1.75 1 150t-70 sma/f rear 8310-201-2-f 70/10 dc-18.0 3.25 db 1.75 2 150t-70 sma/f front 8310-201-2-r 70/10 dc-18.0 3.25 db 1.75 2 150t-70 sma/f rear 8310-202-f 121/1 dc-18.0 5.25 db 1.95 1 150t-11+150t-110 sma/f front 8310-202-r 121/1 dc-18.0 5.25 db 1.95 1 150t-11+150t-110 sma/f rear 8310-204-f 62/2 dc-18.0 3.70 db 1.95 1 150t-62 sma/f front 8310-204-r 62/2 dc-18.0 3.70 db 1.95 1 150t-62 sma/f rear 8310-204-2-f 62/2 dc-18.0 3.70 db 1.95 2 150t-62 sma/f front 8310-204-2-r 62/2 dc-18.0 3.70 db 1.95 2 150t-62 sma/f rear 127 5305 spectrum drive, frederick, md 21703-7362 tel: 301-846-9222, 800-638-2048 fax: 301-846-9116 web: www.aeroflex-weinschel.com email: weinschel-sales@aeroflex.com revision date: 7/8/08 programmable attenuators model no attenuation frequency insertion loss swr no of attenuator connector conn value (db) range (ghz) (maximum) (maximum) channels model no.* type location 8310-1-f 63/1 dc-1.0 (75 ) 6.0 db 1.6 1 3250t-63 bnc/f front 8310-1-r 63/1 dc-1.0 (75 ) 6.0 db 1.6 1 3250t-63 bnc/f rear 8310-1-2-f 63/1 dc-1.0 (75 ) 6.0 db 1.6 2 3250t-63 bnc/f front 8310-1-2-r 63/1 dc-1.0 (75 ) 6.0 db 1.6 2 3250t-63 bnc/f rear 8310-1-3-t 63/1 dc-1.0 (75 ) 6.0 db 1.6 1 3250t-63 bnc/f front to rear 8310-2-f 63/1 dc-1.0 (75 ) 6.75 db 2.0 1 3250t-63 f/f front 8310-2-r 63/1 dc-1.0 (75 ) 6.75 db 2.0 1 3250t-63 f/f rear 8310-2-2-f 63/1 dc-1.0 (75 ) 6.75 db 2.0 2 3250t-63 f/f front 8310-2-2-r 63/1 dc-1.0 (75 ) 6.75 db 2.0 2 3250t-63 f/f rear 8310-35-f 127/1 dc-2.0 6.0 db 1.4 1 3200t-1 n/f front 8310-35-f-e 127/1 dc-3.0 6.0 db 1.4 1 3200t-1e n/f front 8310-35-r 127/1 dc-2.0 6.0 db 1.4 1 3200t-1 n/f rear 8310-35-r-e 127/1 dc-3.0 6.0 db 1.4 1 3200t-1e n/f rear 8310-35-2-f 127/1 dc-2.0 6.0 db 1.4 2 3200t-1 n/f front 8310-35-2-r 127/1 dc-2.0 6.0 db 1.4 2 3200t-1 n/f rear 8310-35-3-t 127/1 dc-2.0 6.0 db 1.4 3 3200t-1 n/f front to rear 8310-35-4-t 127/1 dc-2.0 6.0 db 1.4 4 3200t-1 n/f front to rear 8310-35-4-t-e 127/1 dc-3.0 6.0 db 1.4 4 3200t-1e n/f front to rear 8310-36-f 64.5/0.1 dc-2.0 8.0 db 1.4 1 3209t-1 n/f front 8310-36-r 64.5/0.1 dc-2.0 8.0 db 1.4 1 3209t-1 n/f rear 8310-36-2-f 64.5/0.1 dc-2.0 8.0 db 1.4 2 3209t-1 n/f front 8310-36-2-r 64.5/0.1 dc-2.0 8.0 db 1.4 2 3209t-1 n/f rear 8310-36-3-t 64.5/0.1 dc-2.0 8.0 db 1.4 3 3209t-1 n/f front to rear 8310-37-f 63.75/0.25 dc-2.0 6.0 db 1.4 1 3200t-2 n/f front 8310-37-r 63.75/0.25 dc-2.0 6.0 db 1.4 1 3200t-2 n/f rear 8310-37-2-F 63.75/0.25 dc-2.0 6.0 db 1.4 2 3200t-2 n/f front 8310-37-2-r 63.75/0.25 dc-2.0 6.0 db 1.4 2 3200t-2 n/f rear 8310-37-3-t 63.75/0.25 dc-2.0 6.0 db 1.4 3 3200t-2 n/f front to rear 8310-37-4-t 63.75/0.25 dc-2.0 6.0 db 1.4 4 3200t-2 n/f front to rear 8310-38-f 63/1 dc-2.0 5.25 db 1.4 1 3206t-1 n/f front 8310-38-f-e 63/1 dc-3.0 5.25 db 1.4 1 3206t-1e n/f front 8310-38-r 63/1 dc-2.0 5.25 db 1.4 1 3206t-1 n/f rear 8310-38-2-f 63/1 dc-2.0 5.25 db 1.4 2 3206t-1 n/f front 8310-38-2-r 63/1 dc-2.0 5.25 db 1.4 2 3206t-1 n/f rear 8310-38-3-t 63/1 dc-2.0 5.25 db 1.4 3 3206t-1 n/f front to rear 8310-38-4-t 63/1 dc-2.0 5.25 db 1.4 4 3206t-1 n/f front to rear 8310-352-f 103/1 dc-6.0 6.00 db 1.55 1 3408t-103 n/f front 8310-352-r 103/1 dc-6.0 6.00 db 1.55 1 3408t-103 n/f rear 8310-352-2-f 103/1 dc-6.0 6.00 db 1.55 2 3408t-103 n/f front 8310-352-2-r 103/1 dc-6.0 6.00 db 1.55 2 3408t-103 n/f rear 8310-352-3-t 103/1 dc-6.0 6.00 db 1.55 3 3408t-103 n/f front to rear 8310-352-4-t 103/1 dc-6.0 6.00 db 1.55 4 3408t-103 n/f front to rear ordering guide...8310 series with 3200 programmables *refer to individual data sheet for detailed specifications on internal programmables. ordering guide...8310 series with 150 programmables
5305 spectrum drive, frederick, md 21703-7362 tel: 301-846-9222, 800-638-2048 fax: 301-846-9116 web: www.aeroflex-weinschel.com email: weinschel-sales@aeroflex.com 128 revision date: 7/8/08 programmable attenuators model no attenuation frequency insertion loss swr no of attenuator connector conn value (db) range (ghz) (maximum) (maximum) channels model no.* type location 8311-1-6-f 63/1 dc-1.0 (75 ) 6.00 db 1.60 6 3250t-63 bnc/f front 8311-38-6-f 63/1 dc-2.0 5.25 db 1.40 6 3206t-1 n/f front 8311-38-12-t 63/1 dc-2.0 5.25 db 1.40 12 3206t-1 n/f front-rear 8311-137-6-f 63/1 0.8-3.0 4.70 db 1.60 6 4226-63 n/f front 8311-202-2-f 121/1 dc-18.0 5.25 db 1.95 2 150t-11+150t-110 sma/f front 8311-202-3-f 121/1 dc-18.0 5.25 db 1.95 3 150t-11+150t-110 sma/f front 8311-204-6-f 62/2 dc-18.0 3.70 db 1.95 6 150t-62 sma/f front 8311-352-6-f 103/1 dc-6.0 6.00 db 1.55 6 3408t-103 sma/f front 8311-352-9-t 103/1 dc-6.0 6.00 db 1.55 9 3408t-103 sma/f front-rear ordering guide...8311 series! physical dimensions note: 1. all dimensions are given in mm (inches) and are maximum, unless otherwise specified. 2. connector location (front/rear) may vary depending on model ordered. connector type dim a n 29.2 (1.15) sma 8.6 (0.34) bnc 18.8 (0.74) f 9.65 (0.38) 8310 series: 8311 series:
|
