ecv www.vishay.com vishay roederstein revision: 18-oct-12 1 document number: 25003 for technical questions, contact: aluminumcaps 1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 aluminum capacitors features ? load life: 2000 h at 105 c ? miniature dimension ? smd style ? reflow soldering ? polarized aluminum electrolytic capacitors ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? industrial electronics, automotive electronics, telecommunication systems ? smoothing and filtering ? miniature power supply un its, dc-to-dc converters packaging supplied in blister tape. quick reference data description value nominal case size (? d x l in mm) 4 x 5.3 to 12.5 x 13.5 rated capacitance range, c r 10 f to 2200 f capacitance tolerance 20 % rated voltage range 6.3 v to 50 v category temperature range - 40 c to 105 c load life 2000 h based on sectional spec ification iec 60384-4/en130300 climatic category iec 60068 40/105/56 selection chart for c r , u r , and relevant nominal case sizes (? d x l in mm) c r (f) rated voltage (v) 6.31016253550 10 ?? 4 x 5.3 ? 5 x 5.3 6.3 x 5.8 22 ??? 6.3 x 5.8 6.3 x 5.8 8 x 6.2 33 ?? 6.3 x 5.8 6.3 x 5.8 8 x 6.2 8 x 10 47 5 x 5.3 ? 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 100 ? 6.3 x 5.8 ? 8 x 10 ? 10 x 10 220 ? 8 x 10 10 x 10 ? 10 x 10 12.5 x 13.5 330 8 x 10 ? 10 x 10 10 x 10 12.5 x 13.5 - 470 ? 10 x 10 10 x 10 10 x 10 12.5 x 13.5 - 680 ??? 12.5 x 13.5 - - 1000 ? 10 x 10 12.5 x 13.5 - - - 1500 10 x 10 12.5 x 13.5 - - - - 2200 12.5 x 13.5 - - - - -
ecv www.vishay.com vishay roederstein revision: 18-oct-12 2 document number: 25003 for technical questions, contact: aluminumcaps 1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? unless otherwise specified, all electrical values apply at t amb = 20 c, p = 86 kpa to 106 kpa, rh = 45 % to 75 %. ordering example ecv 220 f/35 v, 20 %, size 10 mm x 10 mm ordering code: malsecv00ag322fark for standard packaging quantity (spq) and minimum order quantity (moq) please refer to our price list or contact customer service. dimensions in millimeters case size code d ? l ? a ? b ? c ? e ? rnp bb 4 0.5 5.3 0.2 1.9 0.2 4.3 0.2 4.3 0.2 1.0 0.2 0.5 to 0.8 0.3 0.5 bc 5 0.5 5.3 0.2 2.3 0.2 5.3 0.2 5.3 0.2 1.4 0.2 0.5 to 0.8 0.3 0.5 ad 6.3 0.5 5.8 0.3 2.4 0.2 6.6 0.2 6.6 0.2 2.2 0.2 0.5 to 0.8 0.3 0.5 bm 6.3 0.5 7.7 0.4 2.4 0.2 6.6 0.2 6.6 0.2 2.2 0.2 0.5 to 0.8 0.3 0.5 ae 8 0.5 6.2 0.4 3.3 0.2 8.3 0.2 8.3 0.2 2.3 0.2 0.5 to 0.8 0.3 0.5 af 8 0.5 10 0.5 2.9 0.2 8.3 0.2 8.3 0.2 3.1 0.2 0.8 to 1.1 0.3 0.5 ag 10 0.5 10 0.5 3.2 0.2 10.3 0.2 10.3 0.2 4.5 0.2 0.8 to 1.1 0.3 0.5 ah 12.5 0.5 13.5 0.5 4.6 0.2 12.8 0.2 12.8 0.2 4.5 0.2 1.1 to 1.4 0.3 0.5 ? d b a a c capacitance lot no. voltage plastic plateform l e n max. p max. r positive negative - + - + 22 a 50 electrical data symbol description u r rated voltage c r rated capacitance at 120 hz tan ? max. dissipation factor at 120 hz r esr max. equivalent series resistance at 120 hz i r rated alternating current at 120 hz and upper category temperature electrical data and ordering information u r (v) c r 120 hz (f) dimensions dxl (mm) tan ? 120 hz r esr 120 hz/20 c ( ? ) i r 120 hz/105 c (ma) weight (g) catalog number 6.3 47 5 x 5.3 0.22 6.21 36 0.17 malsecv00bc247bark 330 8 x 10 0.28 1.13 288 1.00 malsecv00af333bark 1500 10 x 10 0.28 0.25 560 1.21 malsecv00ag415bark 2200 12.5 x 13.5 0.28 0.17 730 2.00 malsecv00ah422bark 10 100 6.3 x 5.8 0.19 2.52 60 0.30 malsecv00ad310cark 220 8 x 10 0.24 1.45 173 1.00 malsecv00af322cark 470 10 x 10 0.24 0.68 351 1.21 malsecv00ag347cark 1000 10 x 10 0.24 0.32 550 1.21 malsecv00ag410cark 1500 12.5 x 13.5 0.24 0.21 650 2.00 malsecv00ah415cark 16 10 4 x 5.3 0.16 21.22 17 0.12 malsecv00bb210dark 33 6.3 x 5.8 0.16 6.43 40 0.30 malsecv00ad233dark 47 6.3 x 5.8 0.16 4.52 50 0.30 malsecv00ad247dark 220 10 x 10 0.20 1.21 330 1.21 malsecv00ag322dark 330 10 x 10 0.20 0.80 441 1.21 malsecv00ag333dark 470 10 x 10 0.20 0.56 489 1.21 malsecv00ag347dark 1000 12.5 x 13.5 0.20 0.27 600 2.00 malsecv00ah410dark
ecv www.vishay.com vishay roederstein revision: 18-oct-12 3 document number: 25003 for technical questions, contact: aluminumcaps 1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 reflow soldering conditions for smd aluminum electrolytic capacitors 25 22 6.3 x 5.8 0.14 8.44 38 0.30 malsecv00ad222eark 33 6.3 x 5.8 0.14 5.63 48 0.30 malsecv00ad233eark 47 8 x 6.2 0.16 4.52 79 0.55 malsecv00ae247eark 100 8 x 10 0.16 2.12 181 1.00 malsecv00af310eark 330 10 x 10 0.16 0.64 372 1.21 malsecv00ag333eark 470 10 x 10 0.16 0.45 450 1.21 malsecv00ag347eark 680 12.5 x 13.5 0.16 0.31 500 2.00 malsecv00ah368eark 35 10 5 x 5.3 0.12 15.92 24 0.17 malsecv00bc210fark 22 6.3 x 5.8 0.12 7.23 42 0.30 malsecv00ad222fark 33 8 x 6.2 0.13 5.22 76 0.55 malsecv00ae233fark 47 8 x 10 0.13 3.67 124 1.00 malsecv00af247fark 220 10 x 10 0.13 0.78 450 1.21 malsecv00ag322fark 330 12.5 x 13.5 0.13 0.52 500 2.00 malsecv00ah333fark 470 12.5 x 13.5 0.13 0.37 600 2.00 malsecv00ah347fark 50 10 6.3 x 5.8 0.10 13.26 30 0.30 malsecv00ad210hark 22 8 x 6.2 0.12 7.23 67 0.55 malsecv00ae222hark 33 8 x 10 0.12 4.82 133 1.00 malsecv00af233hark 47 10 x 10 0.12 3.39 180 1.21 malsecv00ag247hark 100 10 x 10 0.12 1.59 310 1.21 malsecv00ag310hark 220 12.5 x 13.5 0.12 0.72 480 2.00 malsecv00ah322hark profile feature soldering condition ? 4 to ? 10 ? 12.5 ? 16 average ramp-up rate (t l to t p ) 3 c/s max. 3 c/s max. preheat temperature min. (t s min.) 150 c 150 c temperature max. (t s max.) 200 c 200 c time (t s min. to t s max.) 60 s to 150 s 40 s to 120 s 40 s to 100 s t s max. to t l ramp-up rate 3 c/s max. 3 c/s max. time maintained above temperature (t l ) 217 c 217 c time (t l ) 60 s to 90 s 40 s to 60 s peak/classification temperature (t p ) 250 c 240 c 230 c time within 5 c of actual peak temperature (t p ) 10 s max. 10 s max. ramp-down rate 3 c/s max. 3 c/s max. time 25 c to peak temper ature 8 min max. 8 min max. electrical data and ordering information u r (v) c r 120 hz (f) dimensions dxl (mm) tan ? 120 hz r esr 120 hz/20 c ( ? ) i r 120 hz/105 c (ma) weight (g) catalog number ramp-up ramp-down t s min. t s max. t s preheat t p t l t p critical zone t l to t p t 25 c to peak time temperature t l
ecv www.vishay.com vishay roederstein revision: 18-oct-12 4 document number: 25003 for technical questions, contact: aluminumcaps 1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 resistance to soldering heat leakage current less than specified value capacitance value within 10 % of initial value tan ? less than specified value low temperature behavior (at 120 hz) impedance ratio (z) t2/(z) t1 rated voltage (v) t2/t1 6.31016253550 - 25 c/+ 20 c 3 3 2 2 2 2 - 40 c/+ 20 c 8 5 4 3 3 3 additional electrical data parameter conditions value current leakage current (test conditions: u r , 20 c) after 2 min at u r i l2 ? 0.01 x c r x u r or 3 a for u r ? 100 v (whichever is greater) resistance equivalent series resistance (esr) calculated from tan ? max. esr = tan ? /2 ? f c r multiplier of ripple current (i r ) as a function of frequency frequency (hz) i r multiplier for u r ? 100 v 50 0.70 120 1.00 300 1.17 1000 1.36 ? 10 000 1.50 test procedures and requirements test procedure (quick reference) requirements load life t amb = 105 c u r and i r applied after 2000 h ? c/c: 20 % of initial value i l ? spec. limit tan ? ? 2 x spec. limit shelf life no voltage applied after 1000 h after test: u r to be applied for 30 min 24 h to 48 h befo re measurement ? c/c: 20 % of initial value i l ? spec. limit tan ? ? 2 x spec. limit
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
