1n914 www.vishay.com vishay semiconductors rev. 1.8, 02-aug-12 1 document number: 85622 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fast switching diodes mechanical data case: do-35 weight: approx. 125 mg cathode band color: black packaging codes/options: tr/10k per 13" reel (52 mm tape), 50k/box tap/10k per ammopack (52 mm tape), 50k/box features ? fast switching speed ? high reliability ? high conductance ? for general purpose switching applicions ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 parts table part ordering code type markin g internal construction remarks 1n914 1n914-tr or 1n914-tap 1n914 sing le diode tape and reel/ammopack absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit repetitive peak reverse voltage v rrm 100 v working peak reverse voltage v rwm 75 v dc blocking voltage v r 75 v rms reverse voltage v r(rms) 53 v forward continuous current i f 300 ma average rectified current half wave rectification with resistive load and f > 50 mhz i f(av) 200 ma non repetitive peak forward surge current t = 1 s i fsm 1a t = 1 s i fsm 4a power dissipation l = 4 mm, t l = 25 c p tot 500 mw thermal characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit thermal resistance junction to ambient air l = 4 mm, t l = constant r thja 300 k/w junction temperature t j + 175 c storage temperature range t stg - 65 to + 175 c
1n914 www.vishay.com vishay semiconductors rev. 1.8, 02-aug-12 2 document number: 85622 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. forward voltage fig. 2 - reverse current vs. reverse voltage package dimensions in millimeters (inches): do-35 electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit forward voltage i f = 10 ma v f 1000 mv breakdown voltage i r = 100 a v (br) 100 v peak reverse current v r = 75 v i r 5a v r = 20 v, t j = 150 c i r 50 a v r = 20 v i r 25 na diode capacitance v r = 0, f = 1 mhz c d 4pf reverse recovery time i f = 10 ma, i r = 1 ma, v r = 6 v, r l = 100 ? t rr 4ns 0 0.4 0.8 1.2 1.6 0.1 1 10 100 1000 i - for w ard c u rrent (ma) f v f - for w ard v oltage ( v ) 2.0 94 9170_1 scattering limit t = 25 c j 1n914 1 10 100 1000 i r - re v erse c u rrent (na) v r - re v erse v oltage ( v ) 10 1 100 94 9098 t j = 25 c scattering limit 94 9366 re v . 6 - date: 19. december 2011 doc u ment no.: sb- v -3906.04-031(4) 26 min. [1.024] 3.9 max. [0.154] 26 min. [1.024] cathode identification 1.7 [0.067] 1.3 [0.050] 3.1 min. [0.120] ? 0.6 max. [0.024] ? 0.4 min. [0.015]
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
