spec no: dsaa6517 rev no: v.8 date: sep/27/2005 page: 1 of 5 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203000554 package dimension s notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .15(0.006") unless otherwise noted. 3. specifications are subject to change without notice . APA3010CGCK green description the green source color devices are made with ingaalp on gaas substrate light emitting diode. features 3.0mmx1.0mm right angle smt led, 2.0mm thickness. low power consumption. wide viewing angle. ideal for back light and indicator. various colors and lens types available. package : 2000pcs / reel. in accord with kingbright environmental policy (document wi - qc -g- 0442). rohs compliant. 3.0mmx1.0 mm right angle smd chip led lam p
spec no: dsaa6517 rev no: v.8 date: sep/27/2005 page: 2 of 5 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203000554 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. part no. dice lens type iv (mcd) @ 20 ma viewing angle min. typ. 2 ? 1/2 APA3010CGCK green (ingaaip) water clear 18 60 120 electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. symbol parameter device typ. max. test conditions units peak peak wavelength green 574 nm i f =20ma d dominant wavelength green 570 nm i f =20ma ? 1/2 spectral line half - width green 20 nm i f =20ma c capacitance green 15 pf v f =0v;f=1mhz v f forward voltage green 2.1 2.5 v i f =20ma i r reverse current green 10 ua v r = 5v parameter green units power dissipation 105 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsaa6517 rev no: v.8 date: sep/27/2005 page: 3 of 5 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203000554 green APA3010CGCK
spec no: dsaa6517 rev no: v.8 date: sep/27/2005 page: 4 of 5 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203000554 recommended soldering pattern (units : mm) tape specifications (units : mm) APA3010CGCK
spec no: dsaa6517 rev no: v.8 date: sep/27/2005 page: 5 of 5 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203000554 packing & label specifications APA3010CGCK remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity/ luminous flux: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
