? semiconductor components industries, llc, 2006 february, 2006 ? rev. 5 1 publication order number: MUR2100E/d MUR2100E preferred device switchmode power rectifier ultrafast ?e? series with high reverse energy capability these state?of?the?art devices are designed for use in switching power supplies, inverters and as free wheeling diodes. features ? 20 mjoules avalanche energy guaranteed ? excellent protection against voltage transients in switching inductive load circuits ? ultrafast 75 nanosecond recovery time ? 175 c operating junction temperature ? low forward voltage ? low leakage current ? high temperature glass passivated junction ? these are pb?free devices* mechanical characteristics ? case: epoxy, molded ? weight: 0.4 gram (approximately) ? finish: all external surfaces corrosion resistant and terminal leads are readily solderable ? lead and mounting surface temperature for soldering purposes: 220 c max for 10 seconds, 1/16 from case ? polarity: cathode indicated by polarity band maximum ratings rating symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 1000 v average rectified forward current (note 1) i f(av) 2.0 @ t a = 35 c a non-repetitive peak surge current (surge applied at rated load conditions, halfwave, single phase, 60 hz) i fsm 35 a operating junction temperature and storage temperature range t j , t stg ?65 to +175 c thermal characteristics characteristic symbol value unit maximum thermal resistance, junction?to?ambient r ja (note 1) c/w maximum ratings are those values beyond which device damage can occur. maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. if these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. pulse test: pulse width = 300 s, duty cycle 2.0%. *for additional information on our pb?free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. device package shipping ? ordering information MUR2100Erl axial lead* 5000/tape & ree l MUR2100E axial lead* 1000 units/bag ultrafast rectifier 2 amps, 1000 volts preferred devices are recommended choices for future use and best overall value. http://onsemi.com ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our t ape and reel packaging specification s brochure, brd8011/d. MUR2100Eg axial lead* 1000 units/bag MUR2100Erlg axial lead* 5000/tape & ree l plastic axial lead case 59 marking diagram a = assembly location y = year ww = work week = pb?free package (note: microdot may be in either location) a MUR2100E yyww
MUR2100E http://onsemi.com 2 electrical characteristics characteristic symbol value unit maximum instantaneous forward voltage (note 2) (i f = 2.0 a, t j = 150 c) (i f = 2.0 a, t j = 25 c) v f 1.75 2.20 v maximum instantaneous reverse current (note 2) (rated dc voltage, t j = 100 c) (rated dc voltage, t j = 25 c) i r 600 10 a maximum reverse recovery time (i f = 1.0 a, di/dt = 50 a/ s) (i f = 0.5 a, i r = 1.0 a, i rec = 0.25 a) t rr 100 75 ns maximum forward recovery time (i f = 1.0 a, di/dt = 100 a/ s, i rec to 1.0 v) t fr 75 ns controlled avalanche energy (see test circuit in figure 6) w aval 10 mj 2. pulse test: pulse width = 300 s, duty cycle 2.0%. v f , instantaneous voltage (v) figure 1. maximum forward voltage figure 2. typical forward voltage v f, instantaneous voltage (v) 0.1 1.0 10 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 100 c v f @ 175 c 25 c 150 c i f , instantaneous forward current (a) 0.1 1.0 10 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 100 c v f @ 175 c 25 c 150 c i f , instantaneous forward current (a)
MUR2100E http://onsemi.com 3 v r , reverse voltage (v) figure 3. maximum reverse current v r , reverse voltage (v) figure 4. typical reverse current i f(av) , average forward current (a) t a , ambient temperature ( c) figure 5. current derating figure 6. power dissipation figure 7. typical capacitance v r , reverse voltage (v) c, capacitance (pf) 1.0e?08 1.0e?07 1.0e?06 1.0e?05 1.0e?04 1.0e?03 1.0e?02 1.0e?01 0 200 400 600 800 1000 100 c v r @ 175 c 25 c 150 c i r , reverse current (a) 1.0e?08 1.0e?07 1.0e?06 1.0e?05 1.0e?04 1.0e?03 1.0e?02 1.0e?01 0 200 400 600 800 1000 v r @ 175 c 25 c 150 c 100 c i r , reverse current (a) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 50 100 150 200 dc square wave i f(av) , average forward current (a) 0 1 2 3 4 0 0.5 1 1.5 2 2.5 dc square wave p f(av) , average power dissipation (a) 1 10 100 0 20 40 60 80 100 120 140 160 180 200
MUR2100E http://onsemi.com 4 lead length, l mounting method 1/8 1/4 1/2 units 1 2 3 52 67 r ja 65 72 80 87 50 c/w c/w c/w typical values for r ja in still air data shown for thermal resistance junction to ambient (r ja ) for the mountings shown is to be used as typical guidelin e values for preliminary engineering or in case the tie point temperature cannot be measured. note 1 ? ambient mounting data mounting method 1 mounting method 2 mounting method 3
MUR2100E http://onsemi.com 5 package dimensions b d k k f f a dim min max min max millimeters inches a 4.10 5.20 0.161 0.205 b 2.00 2.70 0.079 0.106 d 0.71 0.86 0.028 0.034 f ??? 1.27 ??? 0.050 k 25.40 ??? 1.000 ??? notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. all rules and notes associated with jedec do?41 outline shall apply 4. polarity denoted by cathode band. 5. lead diameter not controlled within f dimension. axial lead case 59?10 issue u polarity indicator optional as needed (see styles) on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800?282?9855 toll free usa/canada japan : on semiconductor, japan customer focus center 2?9?1 kamimeguro, meguro?ku, tokyo, japan 153?0051 phone : 81?3?5773?3850 MUR2100E/d switchmode is a trademark of semiconductor components industries, llc. literature fulfillment : literature distribution center for on semiconductor p.o. box 61312, phoenix, arizona 85082?1312 usa phone : 480?829?7710 or 800?344?3860 toll free usa/canada fax : 480?829?7709 or 800?344?3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : http://onsemi.com order literature : http://www.onsemi.com/litorder for additional information, please contact your local sales representative.
|
