View PS9701-V_6906746.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all devices/types available in every country. please check with local nec compound semiconductor devices representative for availability and additional information. photocoupler ps9701 high speed digital output type 5-pin sop photocoupler the mark ? ? ? ? shows major revised points. - nepoc series - ? ? ? ? nec corporation 1994 ? ? ? ? nec compound semiconductor devices 2002 document no. pn10074ej01v0ds (1st edition) (previous no. p11437ej4v0ds00) date published april 2002 cp(k) printed in japan description the ps9701 is an optically coupled isolator containing a gaalas led on the input side and a photodiode and a signal processing circuit on the output side on one chip. this is sop (small outline package) type for high-density applications. features ? high isolation voltage (bv = 2 500 vr.m.s.) ? small and thin package (5-pin sop) ? high-speed response (t phl = 36 ns typ., t plh = 60 ns typ.) ? low threshold input current (i fhl = 2.5 ma typ.) ? open collector type ? ordering number of taping product: ps9701-f3, f4: 3 500 pcs/reel ? safety standards ? ul approved: file no. e72422 (s) ? bsi approved (bs415, bs7002) : no. 8387 ? vde0884 approved (option) applications ? computer and peripheral manufactures ? measurement equipment ? audio-visual
data sheet pn10074ej01v0ds 2 ps9701 package dimensions (unit: mm) 1.27 0.4 +0.10 C0.05 0.25 m 0.10.1 2.10.2 4.4 7.00.3 0.50.3 0.15 +0.10 C0.05 4.00.5 top view 1. anode 2. cathode 3. gnd 4. v o 5. v cc 53 12 4 marking example no. 1 pin mark 9701 n003 rank code year assembled (last 1 digit) week assembled n 0 03 assembly lot
data sheet pn10074ej01v0ds 3 ps9701 ordering information part number package packing style application part standard products vde0884 approved products (option) number *1 ps9701 PS9701-V 5-pin sop magazine case 100 pcs ps9701 ps9701-f3 PS9701-V-f3 embossed tape 3 500 pcs/reel ps9701-f4 PS9701-V-f4 *1 for the application of the safety standard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current i f 30 ma reverse voltage v r 5v detector supply voltage v cc 7v output voltage v o 7v output current i o 50 ma power dissipation p c 85 mw isolation voltage *1 bv 2 500 vr.m.s. operating ambient temperature t a - 40 to +85 c storage temperature t stg - 55 to +125 c *1 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output recommended operating conditions parameter symbol min. typ. max. unit high level input current i fh 57.515ma low level input current i fl 0 250 m a supply voltage v cc 4.5 5.0 5.5 v operating ambient temperature t a 02570 c
data sheet pn10074ej01v0ds 4 ps9701 electrical characteristics (t a = 0 to +70 c, unless otherwise specified) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 10 ma, t a = 25 c 1.4 1.65 1.9 v reverse current i r v r = 5 v, t a = 25 c10 m a terminal capacitance c t v = 0 v, f = 1 mhz, t a = 25 c60pf detector high level output current i oh v cc = v o = 5.5 v, i f = 250 m a 2 250 m a low level output voltage v ol v cc = 5.5 v, i f = 7.5 ma, i ol = 13 ma 0.3 0.6 v high level supply current i cch v cc = 5.5 v, i f = 0 ma 4 6 8 ma low level supply current i ccl v cc = 5.5 v, i f = 10 ma 9 12 15 ma i fhl t a = 25 c 0.5 2.5 5.0 coupled threshold input current (h ? l) v cc = 5 v, v o = 0.8 v, r l = 350 w 7 ma isolation resistance r i-o v i-o = 1 kv dc , rh = 40 to 60%, t a = 25 c 10 11 w isolation capacitance c i-o v = 0 v, f = 1 mhz, t a = 25 c0.6pf propagation delay time (h ? l) *1 t phl v cc = 5 v, i f = 7.5 ma, r l = 350 w , c l = 15 pf, t a = 25 c 36 75 ns propagation delay time (l ? h) *1 t plh 60 75 rise time t r 20 fall time t f 10 *1 test circuit for propagation delay time (pw = 1 s duty cycle = 1/10) pulse input i f monitor 0.1 f r l = 350 w v o c l = 15 pf 51 w input 5 v 0 350 mv (i f = 7.5 ma) 175 mv (i f = 3.75 ma) i f output v cc = 5 v m m t phl t plh 1.5 v v ol c l includes probe and stray wiring capacitance. cautions regarding noise be aware that when voltage is applied suddenly between the photocouplers input and output at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. usage cautions 1. this product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. by-pass capacitor of more than 0.1 m f is used between v cc and gnd near device. also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm.
data sheet pn10074ej01v0ds 5 ps9701 typical characteristics (t a = 25 c, unless otherwise specified) ambient temperature t a (?c) maximum forward current i f (ma) ambient temperature ambient temperature t a (?c) detector power dissipation p c (mw) detector power dissipation vs. ambient temperature ambient temperature t a (?c) normalized threshold input current i fhl vs. ambient temperature forward voltage v f (v) forward current i f (ma) forward current vs. forward voltage forward current i f (ma) output voltage v o (v) maximum forward current vs. 20 0 40 60 80 100 20 40 60 80 100 0.0 C25 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 25 50 75 100 normalized to 1.0 at t a = 25?c, v cc = 5 v, v o = 0.8 v, r l = 350 w normalized threshold input current C25 C50 i f = 7.5 ma, v cc = 5.5 v 5 ma i ol = 13 ma ambient temperature t a (?c) low level output voltage v ol (v) ambient temperature low level output voltage vs. 0.00 0.75 1.00 1.25 1.50 0.50 0.25 C25 0 25 50 75 100 C50 forward current output voltage vs. 20 40 60 80 100 0 85 10 20 30 40 85 85 0 24681012 1 2 3 4 5 6 7 5 v r l v o r l = 100 w 350 w 1 k w 0.01 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 0.1 1.0 10 100 t a = 100?c 50?c 25?c 0?c C25?c
data sheet pn10074ej01v0ds 6 ps9701 load resistance r l ( w ) propagation delay time t phl , t plh (ns) propagation delay time vs. load resistance ambient temperature t a (?c) propagation delay time vs. switching time vs. ambient temperature propagation delay time t phl , t plh (ns) ambient temperature t a (?c) switching time t r , t f (ns) ambient temperature forward current i f (ma) forward current 0 5 10 15 20 25 20 40 60 80 t plh t phl propagation delay time t phl , t plh (ns) propagation delay time vs. 10 100 500 1 k 5 k 10 k 50 k 50 100 500 1 000 i f = 7.5 ma, v cc = 5 v, pw = 1 s, duty 1/10 t phl t plh m 0 C50 C25 0 25 50 75 100 t plh t phl i f = 7.5 ma, v cc = 5 v, r l = 350 w 20 40 60 80 100 120 0 C50 C25 0 25 50 75 100 5 10 15 20 25 i f = 7.5 ma, v cc = 5 v, r l = 350 w t f t r v cc = 5 v, r l = 350 w 30 remark the graphs indicate nominal characteristics.
data sheet pn10074ej01v0ds 7 ps9701 taping specifications (unit: mm) outline and dimensions (tape) tape direction ps9701-f3 ps9701-f4 outline and dimensions (reel) packing: 3 500 pcs/reel 1.550.1 2.00.05 4.00.1 1.750.1 4.60.1 2.9 max. 7.40.1 0.3 8.00.1 1.5 +0.1 C0 f 5.50.05 12.00.2 2.40.1 1001.0 f 13.00.2 f 3302.0 f 2.00.5 11.9 to 15.4 outer edge of flange 17.51.0 13.51.0 2.00.5 13.00.2 r 1.0 21.00.8
data sheet pn10074ej01v0ds 8 ps9701 recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 235 c or below (package surface temperature) ? time of temperature higher than 210 c 30 seconds or less ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 60 to 120 s (preheating) 210?c 100 to 160?c package surface temperature t (?c) time (s) (heating) to 10 s to 30 s 235?c (peak temperature) recommended temperature profile of infrared reflow (2) cautions ?fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
data sheet pn10074ej01v0ds 9 ps9701 specification of vde marks license document (vde0884) parameter symbol speck unit application classification (din vde 0109) for rated line voltages 300 vr.m.s. iv for rated line voltages 600 vr.m.s. iii climatic test class (din iec 68 teil 1/09.80) 40/085/21 dielectric strength maximum operating isolation voltage. test voltage (partial discharge test procedure a for type test and random test) u iorm 710 v peak u pr = 1.2 u iorm , p d < 5 pc u pr 850 v peak test voltage (partial discharge test procedure b for random test) u pr = 1.6 u iorm , p d < 5 pc u pr 1 140 v peak highest permissible overvoltage u tr 4 000 v peak degree of pollution (din vde 0109) 2 clearance distance > 5 mm creepage distance > 5 mm comparative tracking index (din iec 112/vde 0303 part 1) cti 175 material group (din vde 0109) iii a storage temperature range t stg - 55 to +125 c operating temperature range t a - 40 to +85 c isolation resistance, minimum value v io = 500 v dc at t a = 25 cris min.10 12 w v io = 500 v dc at t a max. at least 100 cris min.10 11 w safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) package temperature tsi 150 c current (input current i f , psi = 0) isi 200 ma power (output or total power dissipation) psi 300 mw isolation resistance v io = 500 v dc at t a = 175 c (tsi) ris min. 10 9 w
data sheet pn10074ej01v0ds 10 ps9701 m8e 00. 4 - 0110 the information in this document is current as of april, 2002. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec's data sheets or data books, etc., for the most up-to-date specifications of nec semiconductor products. not all products and/or types are available in every country. please check with an nec sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without prior written consent of nec. nec assumes no responsibility for any errors that may appear in this document. nec does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec semiconductor products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. nec assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec endeavours to enhance the quality, reliability and safety of nec semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. nec semiconductor products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. the recommended applications of a semiconductor product depend on its quality grade, as indicated below. customers must check the quality grade of each semiconductor product before using it in a particular application. "standard": computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "special": transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "specific": aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. the quality grade of nec semiconductor products is "standard" unless otherwise expressly specified in nec's data sheets or data books, etc. if customers wish to use nec semiconductor products in applications not intended by nec, they must contact an nec sales representative in advance to determine nec's willingness to support a given application. (note) (1) "nec" as used in this statement means nec corporation, nec compound semiconductor devices, ltd. and also includes its majority-owned subsidiaries. (2) "nec semiconductor products" means any semiconductor product developed or manufactured by or for nec (as defined above).
nec compound semiconductor devices hong kong limited hong kong head office taipei branch office korea branch office tel: +852-3107-7303 tel: +886-2-8712-0478 tel: +82-2-528-0301 fax: +852-3107-7309 fax: +886-2-2545-3859 fax: +82-2-528-0302 nec electron devices european operations http://www.nec.de/ tel: +49-211-6503-101 fax: +49-211-6503-487 california eastern laboratories, inc. http://www.cel.com/ tel: +1-408-988-3500 fax: +1-408-988-0279 0110 nec compound semiconductor devices, ltd. 5th sales group, sales division tel: +81-3-3798-6372 fax: +81-3-3798-6783 e-mail: salesinfo@csd-nec.com business issue nec compound semiconductor devices, ltd. http://www.csd-nec.com/ sales engineering group, sales division e-mail: techinfo@csd-nec.com fax: +81-44-435-1918 technical issue ps9701 safety information on this product caution gaas products the product contains gallium arsenide, gaas. gaas vapor and powder are hazardous to human health if inhaled or ingested. ? do not destroy or burn the product. ? do not cut or cleave off any part of the product. ? do not crush or chemically dissolve the product. ? do not put the product in the mouth. follow related laws and ordinances for disposal. the product should be excluded from general industrial waste or household garbage.

▲Up To Search▲

Price & Availability of PS9701-V

	To Download PS9701-V Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .