r low cost! r 10% standard inductance tolerance r 3 amp and 3 amp models are standard (available up to 20 amp) r pre-tinned leads for plug-in pcb mounting r temperature rating: -55c to +105c r vertical mount style available r non-standard values and tolerances available r varnish or shrink tube insulation available features rcd components inc., 520 e. industrial park dr., manchester, nh usa 03109 tel: (603) 669-0054 fax:(603) 669-5455 e-mail: rcdcompinc@aol.com www.rcd-comp.com custom inductive products ch series ca series type induc. (1 kh z) rated current dcr max. (ohm) srf mhz (m in.) dimensions a (max.) b (max.) f.062 [1.6] w.004 [.1] ch3 5h 10h 27h 50h 100h 150h 270h 3a 3a 3a 3a 3a 3a 3a .015 .018 .035 .050 .065 .075 .095 40 25 8 5 2.5 2 1 .625 [15.9] .625 [15.9] .812 [20.6] .812 [20.6] .812 [20.6] .812 [20.6] .812 [20.6] .875 [22.2] 1.125 [28.6] .875 [22.2] 1.125 [28.6] 1.375 [34.9] 1.375 [34.9] 1.625 [41.3] .500 [12.7] .687 [17.4] .437 [11.1] .750 [19.1] .937 [23.8] 1.062 [27] 1.312 [33.3] .040 [1.02] .040 [1.02] .040 [1.02] .040 [1.02] .040 [1.02] .040 [1.02] .040 [1.02] ch5 5h 10h 27h 50h 68h 100h 150h 5a 5a 5a 5a 5a 5a 5a .012 .015 .025 .030 .054 .050 .060 30 20 7 4 3.5 2.5 2 .640 [16.3] .640 [16.3] .875 [22.2] .875 [22.2] .875 [22.2] .875 [22.2] 1.125 [28.6] .875 [22.2] 1.125 [28.6] 1.125 [28.6] 1.375 [34.9] 1.625 [41.3] .750 [19.1] 1.000 [25.4] .562 [14.3] .750 [19.1] .875 [22.2] 1.000 [25.4] 1.250 [31.8] .054 [1.4] .054 [1.4] .054 [1.4] .054 [1.4] .054 [1.4] .054 [1.4] .054 [1.4] radial lead high current filter chokes axial lead high current filter chokes type induc. (1 khz) rated current dcr max. (ohm) srf mhz (min.) dimensions a (max.) b (max.) w.004 [.1] ca1 27h 50h 100h 270h 470h 680h 1a 1a 1a 1a 1a 1a .13 .17 .25 .50 .56 .74 5 4 2 1 .8 .7 .400 [10.2] .400 [10.2] .475 12.1] .475 12.1] .550 [14.0] .550 [14.0] .875 [22.2] 1.125 [28.6] .875 [22.2] .875 [22.2] 1.125 [28.6] 1.125 [28.6] .032 [.81] .032 [.81] .032 [.81] .032 [.81] .032 [.81] .032 [.81] ca2 27h 50h 100h 270h 2a 2a 2a 2a .085 .135 .155 .300 5.5 4 2 1 .475 12.1] .550 [14.0] .550 [14.0] .550 [14.0] 1.05 [26.7] 1.125 [28.6] 1.125 [28.6] 1.125 [28.6] .032 [.81] .032 [.81] .032 [.81] .032 [.81] ca3 5h 10h 27h 50h 100h 3 3 3 3 3 .02 .035 .07 .075 .125 25 20 6 4 2 .475 12.1] .475 12.1] .550 [14.0] .550 [14.0] .550 [14.0] .875 [22.2] .875 [22.2] 1.125 [28.6] 1.125 [28.6] 1.125 [28.6] .032 [.81] .032 [.81] .032 [.81] .032 [.81] .032 [.81] resist ors w coils w delay lines 1.25 [31.8] typ. .125 [3.2] max. ? b ? ? ? ? ? - w ? a ? .125 [3.2] max. .5 [12.7] typ. ? b ? - - ? a ? w ? ? r low cost! r 10% standard inductance tolerance (non-standard values and tolerances available) r available on tape & reel r increased current ratings available r varnish or shrink tube insulation available r temperature rating: -55c to 105c features preliminary faxxxx specifications subject to change without notice p/n designation: ca3 - 50uh - k b rcd type inductance (absolute) tolerance code : k=10% packaging : b = bulk p/n designation: ch3 - 50uh - k b rcd type inductance (absolute) tolerance code : k=10% packaging : b = bulk
|