2200 series illuminated and non - illuminated pushbutton switches specifications k-30 k apem materials ?case : polyamide 6-6 ?cap : polycarbonate ?base : polyamide 6-6 ?contacts : silver inlay approvals availability : all models. marking : all models are standard marked. electrical specifications ?max. current/voltage rating with resistive load - ul-csa approved ratings : 6a 250vac - 6a 125vac ?initial contact resistance : 10 m ? max. at 1a 2vdc ?insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 2.500 vrms 50 hz min. ?electrical life : 10.000 cycles at full load ?illuminated version with lamp wired separately : - filament lamps 6, 12 and 24 v, replaceable, type t5 with flanged base, 5.000 h 1w - electrode lamps, non replaceable, with built-in resistance, 7.000 h : . neon lamp for 110 and 220vac and cap colours other than green or blue . fluorescent green lamp for 110 and 220vac and green or blue cap general specifications ?panel thickness : 0,8 to 3 mm (.031 to .118) see table opposite ?operating temperature : -20? to +55? panel cut-out according to panel thickness dimension "a" 19 -0/+0,3 (.748 -0/+.011) 19,3 -0/+0,1 (.759 -0/+.003) 19,5 -0/+0,1 (.767 -0/+.003) 0,8 to 1,2 (.031 to .047) 1,3 to 2 (.051 to .078) 2,1 to 3 (.082 to .118) panel thickness dimensions : first dimensions are in mm while inches are shown as bracketted numbers. packaging unit : 20 pieces. a a
2200 series illuminated and non - illuminated pushbutton switches solder lug/quick-connect terminals 2,8 x 0,5 (.110 x .019) k-31 k apem double pole single pole model structure single pole double pole 2231a off - on 2233a off - mom 2241a off - on 2243a off - mom ? momentary or latching action on latching action type, the button remains in low position when "on" ?1 and 2 pole configurations ?matching indicators, series 2100 : consult factory with chrome plated bezel (code 8) dimensions are 22,8 x 22,8 (.897 x .897) with chrome plated bezel (code 8) dimensions are 22,8 x 22,8 (.897 x .897) panel cut-out : see specifications on previous page. b4 b3 a2 a1 l1 l2 a1 a2 l1 l2 1.20 2.40 (.094) (.047) 2.80x0.50 7.20 (.283) (.11x.019) 10.00 20.00 2.00 18.70 5.08 12.70 6.35 14.00 14.00 22.00 22.00 7.20 21.00 9.00 18.70 (.25) (.283) (.826) (.11x.031) (.736) (.736) (.5) (.2) (.078) (.354) (.787) (.393) (.866) (.551) (.866) (.551) 2.80x0.50 a1 l1 l2 a2 5.60 (.22) l2 a2 b4 l1 a1 b3 (.5) (.354) (.736) (.826) (.283) 18.70 9.00 21.00 7.20 (.736) 18.70 (.2) (.5) 12.70 5.08 (.393) (.787) (.078) 2.00 20.00 10.00 (.551) (.866) (.551) (.866) 22.00 22.00 14.00 14.00 (.11x.031) 2.80x0.50 12.70 (.22) 5.60
2200 series illuminated and non - illuminated pushbutton switches k-32 k apem designation frame colours -2 black -4 grey -8 chrome plated bezel mounted on frame cap colours lamps p/n * code filament lamp 6v - replaceable from front - type t5 with glass socket - 5.000 h min. - 1w u776 l6v filament lamp 12v - replaceable from front - type t5 with glass socket - 5.000 h min. - 1w u777 l12v filament lamp 24-28v - replaceable from front - type t5 with glass socket - 5.000 h min. - 1w u778 l24v neon lamp 110vac - non replaceable - with built-in resistor - 7.000 h min. - l110v neon lamp 220vac - non replaceable - with built-in resistor - 7.000 h min. - l220v fluorescent green lamp 110vac - for green or blue rocker - 7.000 h min. - l110v3 fluorescent green lamp 220vac - for green or blue rocker - 7.000 h min. - l220v3 case without lamp - a filament lamp 6, 12 or 24v can be mounted afterwards - lf non illuminated pushbutton switch - l0 complete box with one of the codes below. to order a product without cap, complete above box with code 0. to order caps separately, use their part number (u...) for illuminated switches p/n code - 0 u671 1 u673 3 u674 4 u675 5 u676 6 u677 7/1 u679 9 without cap blue* green* clear yellow red white orange for non-illuminated switches p/n code - 0 without cap u1281 1 blue u1282 2 black u1283 3 green u1284 4 grey u1285 5 yellow u1286 6 red u1287 7/1 white u1289 9 orange cap marking available, consult factory. * use p/n to order filament lamps separately. note : with chrome plated bezel, dimensions are 22,8 x 22,8 (.897 x .897) * with green or blue cap, use fluorescent lamp only.
|
