irc advanced film division general note irc reserves the right to make changes in product speci?cation without notice or liability. all information is subject to ircs own data and is considered accurate at time of going to print. a subsidiary of tt electronics plc ? corpus christi texas 78411 usa ? irc advanced film division telephone: 361 992 7900 ? facsimile: 361 992 3377 ? email: afdsales@irctt.com ? website: www.irctt.com series issue october 2006 pcs-p split ground high power thin film terminators pcs-p series ? high power dissipation to 80w ? high frequency operation to 1.5ghz ? high heat dissipating double-sided ?ange the pcs-p series split ground high power thin ?lm terminator com- bines the improved heat dissipation of a double-sided ?ange and the split ground to give a power rating of up to 80w, while providing excellent high frequency characteristics from dc to 1.5 ghz. attaching the ?ange directly to a heat sink provides improved heat dissipation at a higher power rating. typical applications include aerospace, wireless communication, satellites and rf power ampli?ers. 20 electrical data 3042p 3060p 3080p impedance 50 ? vswr dc to 1.5 ghz 1.1 1.2 1.6 to 3 ghz 1.1 n/a 3.1 to 10 ghz 1.3 n/a tcr 50ppm/c power rating @70c 1w 1.5w max power rating with heat sink @65c 5w 30w 80w operating temperature range -55c to +125c termination 90/10 sn/pb or 100% sn environmental data test condition to meet short time overload 2.5 x rated voltage, 5 sec. 0.5% +0.05 ? load life 40c, 1000 hours 1.0% +0.05 ? moisture resistance 1000 hours, 40c 95% rh 1.0% +0.05 ? temperature cycle 5 cycles 70c high, -10c low 0.5% +0.05 ? resistance to soldering heat 250c, 3 sec. 0.5% +0.05 ? insulation resistance dc 500v, 1 min. >1,000m ? sheet 1 of 2
irc advanced film division ? irc advanced film division ? corpus christi texas 78411 usa telephone: 361 992 7900 ? facsimile: 361 992 3377 ? email: afdsales@irctt.com ? website: www.irctt.com series issue october 2006 pcs-p split ground high power thin film terminators physical data 21 pre?x hfr - pcs3080p - 50r0 model pcs3042p = split ground thin ?lm terminator with 90/10 sn/pb terminators pcs3042plf = split ground thin ?lm terminator with 100 % sn terminations pcs3060p = split ground thin ?lm terminator with 90/10 sn/pb terminators pcs3060plf = split ground thin ?lm terminator with 100 % sn terminations pcs3080p = split ground thin ?lm terminator with 90/10 sn/pb terminators pcs3080plf = split ground thin ?lm terminator with 100 % sn terminations impedance 50r0 = 50 7 ordering data dimensions (mm) dim. 3042p 3060p 3080p l 13.00.30 13.00.30 13.00.30 t 2.5 max 2.5 max 2.5 max a 3.00.2 3.00.2 3.00.2 b 8.00.3 8.00.3 8.00.3 c 3.00.2 5.0 min 3.00.2 d 2.50.3 2.50.3 2.50.3 w 2- f 2.50.2 2- f 2.50.2 2- f 2.50.2 w1 0.40.1 0.40.1 0.40.1 t 0.20.1 0.20.1 0.20.1 l t t w w1 a c b d schematic sheet 2 of 2
|
