1 0 w u l t r a m i n i a t u r e m e d i c a l g r a d e s w i t c h i n g p o w e r s u p p l i e s e f m 1 0 / m s e r i e s www.astrodyne.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458 universal 90-264vac input high effciency improved emi performance 4000v isolation single, dual & triple outputs ul60601-1, en60601-1 model number output voltage output amps(max) single output efm-0100/m 3.3 volts(dc) 2.5amps efm-0101/m 5 volts(dc) 2amps efm-0122/m 9 volts(dc) 1.1amps efm-0102/m 12 volts(dc) 0.85amps efm-0103/m 15 volts(dc) 0.67amps efm-0118/m 18 volts(dc) 0.55amps efm-0105/m 24 volts(dc) 0.42amps dual output efm-0106/m 12 volts(dc) 0.42amps efm-0107/m 15 volts(dc) 0.34amps efm-0108/m 5 / 12volts(dc) 1.3/0.6amps triple output efm-0109/m 5 /12 volts(dc) 1.8 / 0.13amps efm-0111/m 5 / 15 volts(dc) 1.8 / 0.13amps 1.66w x 2.46l x 0.91h
1 0 w u l t r a m i n i a t u r e m e d i c a l g r a d e s w i t c h i n g p o w e r s u p p l i e s e f m 1 0 / m s e r i e s www.astrodyne.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458 * these are stress ratings. exposure of the devices to any of these conditions may adversely affect long term reliability. proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. all specifcations are typical at nominal input, full load, and 25c unless other - wise noted astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. input specifications input voltage range 90-264 vac frequency range 47-63 hz inrush current (115/230vin) 20/40amps, typ. leakage current <500ua @ 264vac, 50hz output specifications voltage and current (note 5) see selection chart load regulation (20%-fl)(note 6) singles: 3%, duals: 3% (efm-0108/m: 0.5/3%) triple: 0.2 / 0.3% line regulation, typ (note 7) singles 0.1~1% duals 0.3~1% (except efm-0108/m: 0.5/ 0.5%) triple: 0.3 / 0.1% cross regulation (note 10) duals 2% (efm-0108/m: 0.5/3%) triple: na/ 0.1% preset accuracy (note 8) single/duals 1% (except efm-0108/m: 2 / 5%) triple: 1 / 5% dc voltage adjust (typ) 6% of fs (primary) temperature coeffcient 0.03%/c ripple/noise, typ (note 1, 9) single/dual: 100mvpk-pk (except efm-0108/m: 50/50mvpk-pk) triple: 50 / 75mvpk-pk over voltage protection clamp over temp. protection latching, recov after cooling and power restored short circuit protection (note 2) continuous, self-recovering hold up time 30 ms, typ dc output power 10 watts, max physical specifications size 1.66 x 2.46 x 0.91 construction open frame weight 1.6oz (44g) general specifications isolation (note 3) 4kvac input-output 2500vac inpout-ground 1000vac output-ground effciency single/dual 75% typ triple 70% switching frequency 100khz, (fxed, typical) safety ul60601-1, en60601-1 emc en55011 environmental specifications oper. temperature (note 4) -0 to +40c (see derate) storage temperature -25 to +71c * relative humidity 0 to + 95%, non-cond * mtbf (mil std 217, 25c) 575,000 hrs notes 1. ripple and noise depend upon output voltage as specifed per par - ticular model. 2. short curcuit protection is self-recovering when overcurrent condition is removed. 3.isolation for up to 1 minute duration. 4. specifed for free-air convection cooling. 5. minimum load is not required for proper operation. however, auxil - iary outputs should be reduced as a function of primary output minimum load or load regulation will be higher. 6. load regulation measured from 20% to full load. 7. line regulation measured from 90vac to 264vac. 8. preset accuracy measured at nominal load, 120vac input. 9. o/p noise measured directly at pins/terminals at nom. load, 0.1uf bypass, pk-pk @20mhz bandwidth. 10.cross reg-duals: measured at nom. load with the other output varied between 60% and 100% inom.
1 0 w u l t r a m i n i a t u r e m e d i c a l g r a d e s w i t c h i n g p o w e r s u p p l i e s e f m 1 0 / m s e r i e s www.astrodyne.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458 3 . 4 7 1 . 6 . 3 4 1 . 5 . 7 1 9 6 . 4 5 3 1 . 2 1 . 1 1 4 4 . 0 1 9 3 . 0 1 9 3 . n c a l c a 1 2 3 4 5 6 0 1 0 - x e a : v e r s t u p t u o e l g n i s # n i p s t u p t u o l a u d e n i l c a e n i l c a l a r t u e n c a l a r t u e n c a t u p t u o + t u p t u o + n o m m o c c n t u p t u o - t u p t u o - 1 2 3 4 5 3 9 0 a - a : . p r o c c i f i c a p e n y d o r t : : : : : : : : g n i w a r d : e t a d : k c e h c m m 2 . 0 - / + 8 . 1 7 0 . 5 1 . 8 . 3 1 9 . 3 2 1 4 0 . 6 . 2 6 6 4 . 2 2 . 2 4 6 6 . 1 output derating curve mechanical dimensions - single + dual outputs dimensions are in inches c pin# single dual dual(0108) 1 acl acl acl 2 acn acn acn 3 +vout +vout +12v 4 nc com +5v 5 -vout -vout com
1 0 w u l t r a m i n i a t u r e m e d i c a l g r a d e s w i t c h i n g p o w e r s u p p l i e s e f m 1 0 / m s e r i e s www.astrodyne.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458 mechanical dimensions - triple outputs
|
