the connor-winfield corp. 2111 comprehensive drive. aurora, il 60505. fax (630) 851-5040. phone (630) 851-4722. www.conwin.com product data sheet specifications subject to change without notice. data sheet #: rev: date: page of copyright 2001 connor-winfield all rights reserved. crystal controlled oscillators description: the connor winfield htvxg- series and the htvxag-series are 5.0v hcmos, hermetically sealed, voltage controlled temperature compensated crystal oscillator (vctcxo). the htvxg-series and the htvxag-series are designed for application requiring very tight frequency stability and low jitter. 12 features description ordering information 5.0v operation low jitter <1ps rms frequency stability: frequency adjust hermetically sealed dip package rohs compliant / lead free htv1 htv1g / htv1ag: 0.5ppm: 20 to 40c htv2g / htv2ag: 1.0ppm: 0 to 50c htv3g / htv3ag: 2.5ppm: 0 to 70c htv4g / htv4ag: 5.0ppm: -30 to 70c 5.0v hcmos vctcxo 14 pin dip crystal oscillator htvxg-series htvxag-series tx170 01 07/16/09 cw 0643 htv2ag 27.0m absolute maximum ratings table 1.0 parameter units minimum nominal maximum units note storage temperature -40 - 85 c supply voltage (vcc) -0.5 - 7 vdc control voltage (vc) -0.5 - 7 vdc model specifications model htv1g / htv1ag table 2.0 htv1g - frequency range (fo) .110 - 12.7999 mhz htv1ag - frequency range (fo) 12.8 - 60 mhz frequency stability vs. change in temperature -0.5 - 0.5 ppm operating temperature range 20 - 40 c total frequency tolerance -8.0 - 8.0 ppm 1 model htv2g / htv2ag htv2g - frequency range (fo) .110 - 12.7999 mhz htv2ag - frequency range (fo) 12.8 - 60 mhz frequency stability vs. change in temperature -1.0 - 1.0 ppm operating temperature range 0 - 50 c total frequency tolerance -8.5 - 8.5 ppm 1 model htv3g / htv3ag htv3g - frequency range (fo) .110 - 12.7999 mhz htv3ag - frequency range (fo) 12.8 - 60 mhz frequency stability vs. change in temperature -2.5 - 2.5 ppm operating temperature range 0 - 70 c total frequency tolerance -10.0 - 10.0 ppm 1 model htv4g / htv4ag htv4g - frequency range (fo) .110 - 12.7999 mhz htv4ag - frequency range (fo) 12.8 - 60 mhz frequency stability vs. change in temperature -5.0 - 5.0 ppm operating temperature range -30 - 70 c total frequency tolerance -12.5 - 12.5 ppm 1 operating specifications table 3.0 parameter minimum nominal maximum units note frequency calibration @ 25c -2.5 - 2.5 ppm 2 frequency aging first year -2.0 - 2.0 ppm frequency aging ten years (including first year) -5.0 - 5.0 ppm supply voltage (vcc) 4.75 5.0 5.25 vdc supply current (icc) - 15 35 ma jitter (bw=10hz to 20mhz) - - 5 ps rms jitter (bw=12khz to 20mhz) - - 1 ps rms typical phase noise ssb phase noise at 10hz offset - -70 - dbc/hz ssb phase noise at 100hz offset - -100 - dbc/hz ssb phase noise at 1khz offset - -125 - dbc/hz ssb phase noise at 10khz offset - -135 - dbc/hz ssb phase noise at 100khz offset - -145 - dbc/hz input characteristics table 4.0 parameter minimum nominal maximum units note control voltage (vc) 0.5 2.5 4.5 vdc frequency adjust range (0.5 to 4.5v) 8 - 35 ppm 3 frequency adjust linearity -15 - 15 % input impedance 10k - - ohm htv2ag - 027.0m tcxo series center frequency frequency format -xxx.xm min.*, -xxx.xxxxxxm max.* *amount of numbers after the decimal point. m = mhz
the connor-winfield corp. 2111 comprehensive drive. aurora, il 60505. fax (630) 851-5040. phone (630) 851-4722. www.conwin.com product data sheet specifications subject to change without notice. data sheet #: rev: date: page of copyright 2001 connor-winfield all rights reserved. crystal controlled oscillators 22 tx170 01 07/16/09 dimensional tolerance: .005 (.127mm) .02 (.508mm) control voltage table 7.0 pin connection 1 control voltage 7 ground 8 output 14 vcc hcmos output characteristics table 5.0 parameter minimum nominal maximum units note load - - 15 pf voltage (high) (voh) 4.2 4.5 - vdc (low) (vol) - - 0.4 vdc htvxg - series current (high) (ioh) -4 - -ma (low) (ioh) - - 4 ma htvxag-series - current (high) (ioh) -8 - -ma (low) (ioh) - - 8 ma duty cycle at 50% of vcc 45 50 55 % rise / fall time 10% to 90% 3 5 ns note: 1) inclusive of calibration, frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 10 years aging. 2) frequency calibration at 25c, vc = 2.5v, nominal vcc, after one minute warm up time. 3) positive slope. package characteristics table 6.0 package hermetically sealed, metal package. 120c 150c 180c 260c 0 220c 360 sec. max. 120 s max. 10 s 60 s max. time temperature 260c package outline pin connections test circuit solder profile
|
