- 1 - p/n: b-15/13-622-tpm(3)-sxx4x-60-g5 622 mbps bi-directional single fiber transceiver ds-6617 rev 0.0 2011-04-01 features z coaxial single mode single fiber package with optional sc/fc/st connector z wavelength tx 1550 nm/rx 1310 nm z sonet oc-12 sdh stm-4 compliant z single +5v/+3.3v power supply z pecl/lvpecl differential inputs and outputs z wave solderable and aqueous washable z class 1 laser int. safety standard iec 825 compliant z uncooled laser diode with mqw structure z complies with telcordia (bellcore) gr-468-core z optical isolation > 30 db z cross talk < -33 db z optical return loss >14 db z rohs compliance available table 1 ? absolute maximum rating parameter symbol min. typical max. unit notes power supply voltage vcc 0 - 6 v power supply voltage vcc 0 - 3.6 v output current i out - - 30 ma soldering temperature - - - 260 oc 1 storage temperature t stg -40 - 85 oc note 1: 10 senconds on leads only table 2 ? recommended operating condition parameter symbol min. typical max. unit notes power supply voltage vcc 4.75 5 5.25 v power supply voltage vcc 3.1 3.3 3.5 v operating temperature (case) t opr 0 - 70 oc operating temperature (case) t opr -40 - 85 oc data rate dr - 622 - mbps
- 2 - p/n: b-15/13-622-tpm(3)-sxx4x-60-g5 622 mbps bi-directional single fiber transceiver ds-6617 rev 0.0 2011-04-01 table 3 ? transmitter specifications (optical) parameter symbol min. typical max. unit notes optical transmit power p o -3 - +2 dbm 2 output center wavelength c 1500 1550 1600 nm output spectrum width ? - - 2.5 nm optical rise/fall time t r /t f - - 1.2 ns 3 extinction ratio er 8.2 - - db output eye compliant with itu-t recommendation g.957/stm-1 optical isolation - 30 - - db 4 optical return loss - 14 - - db relative intensity noise rin - - -120 db/hz total jitter t j - - 0.55 ns 5 note 2: output power is coupled into a 9/125 m single mode fiber note 3: 10% to 90% values note 4: tx: 1310 nm/ rx: 1550 nm note 5: measured with 2 23 -1 prbs with 72 ones and 72 zeros. table 4 ? transmitter specifications (electrical) parameter symbol min. typical max. unit notes power supply current i cc - - 180 ma 6 data input current-low i il -350 - - a data input current-high i ih - - 350 a differential input voltage v ih -v il 300 - - mv data input voltage-low v il -v cc -2.0 - -1.58 mv data input voltage-high v ih -v cc -1.1 - -0.74 mv 7 note 6: maximum current is specified at vcc=maximum @ maximum temperature note 7: these inputs are compatible with 10k, 10kh and 100k ecl and pecl inputs
- 3 - p/n: b-15/13-622-tpm(3)-sxx4x-60-g5 622 mbps bi-directional single fiber transceiver ds-6617 rev 0.0 2011-04-01 table 5 ? receiver specifications (optical) parameter symbol min. typical max. unit notes sensitivity - - - -28 dbm 8 maximum input power p in -3 - - dbm signal detect-asserted pa - - -28 dbm 9 signal detect-deasserted pd -40 - - dbm 10 signal detect-hysteresis - - 3.0 - db cross talk - - - -33 db wavelength of operation 1290 - 1330 nm note 8: measured with 2 23 -1 prbs with 72 ones and 72 zeros, (itu-t recommendation g.958) note 9: measured on transition: low to high, note 10: measured on transition: high to low. table 6 ? receiver specifications (electrical) parameter symbol min. typical max. unit notes power supply current i cc - - 100 ma 11 data output voltage-low v ol -v cc -1.9 - -1.6 v data output voltage-high v oh -v cc -1.1 - -0.8 v signal detect output voltage-low v sdl -v cc -1.9 - -1.6 v signal detect output voltage-high v sdh -v cc -1.1 - -0.8 v 12 note 11: the current excludes the output load current note 12: these outputs are compatible with 10k, 10kh and 100kecl and lvpecl outputs.
- 4 - p/n: b-15/13-622-tpm(3)-sxx4x-60-g5 622 mbps bi-directional single fiber transceiver ds-6617 rev 0.0 2011-04-01 connection diagram table 7 ? pin definitions pin unit notes 1 rxgnd directly connect this pin to the receiver ground plane 2 rd+ see recommended circuit schematic 3 rd- see recommended circuit schematic 4 sd active high on this indicates a received optical signal 5 rxvcc dc power for the receiver section 6 txvcc dc power for the transmitter section 7 td- see recommended circuit schematic 8 td+ see recommended circuit schematic 9 txgnd directly connect this pin to the transmitter ground plane
- 5 - p/n: b-15/13-622-tpm(3)-sxx4x-60-g5 622 mbps bi-directional single fiber transceiver ds-6617 rev 0.0 2011-04-01 recommended circuit schematic 1 2 3 4 5 97 86 rx vcc tx vcc transceiver top view no internal connection no internal connection c2 c1 c4 l2 c3 l1 rx vcc tx vcc vcc tx vcc rx vcc rd + rd - sd td + td - r8 r10 r9 r7 c6 c5 r1 r3 r2 r4 r5 r6 notes +3.3v: r1=r3=r5=r7=r9=130 r2=r4=r6=r8=r10=82 c1=c2=c3=c5=c6=0.1 f c4=10 f l1=l2=1 h notes +5v: r1=r3=r5=r7=r9=82 r2=r4=r6=r8=r10=130 c1=c2=c3=c5=c6=0.1 f c4=10 f l1=l2=1 h
- 6 - p/n: b-15/13-622-tpm(3)-sxx4x-60-g5 622 mbps bi-directional single fiber transceiver ds-6617 rev 0.0 2011-04-01 package diagram side view rear view top view front view units:mm
- 7 - p/n: b-15/13-622-tpm(3)-sxx4x-60-g5 622 mbps bi-directional single fiber transceiver ds-6617 rev 0.0 2011-04-01 order information table 8 ? order information part no. part no. b-15/13-622-tpm-ssc4-60-g5 b-15/13-622-tpm3-ssc4-60-g5 b-15/13-622-tpm-sst4-60-g5 b-15/13-622-tpm3-sst4-60-g5 b-15/13-622-tpm-sfc4-60-g5 b-15/13-622-tpm3-sfc4-60-g5 b-15/13-622-tpm-ssc4a-60-g5 b-15/13-622-tpm3-ssc4a-60-g5 b-15/13-622-tpm-sst4a-60-g5 b-15/13-622-tpm3-sst4a-60-g5 b-15/13-622-tpm-sfc4a-60-g5 b-15/13-622-tpm3-sfc4a-60-g5
- 8 - p/n: b-15/13-622-tpm(3)-sxx4x-60-g5 622 mbps bi-directional single fiber transceiver ds-6617 rev 0.0 2011-04-01 part numbering definition: b - 15/13 - 622 - tpm(3) - s xx tx powe r temperature -60 -rohs wavelength : 15/13 = tx wavelength = 1550nm rx wavelength = 1310nm communication protocol (622mbps) tpm = +5 v transceiver tpm3 = +3.3v transceiver single mode fiber connector options sc/st/fc tx power 4 = -3 to +2 dbm temperature blank = commercial temperature (0 to 70 o c) a = industrial temperatuure (-40 to 85 o c) -60 : fiber length = 660mm 20mm rohs compliance available g5 = rohs 5/6-compliant product (lead exemption)
- 9 - p/n: b-15/13-622-tpm(3)-sxx4x-60-g5 622 mbps bi-directional single fiber transceiver ds-6617 rev 0.0 2011-04-01 warnings handling precautions: this device is susceptible to damage as a resu lt of electrostatic di scharge (esd). a static free environment is highly recommended. follow guide lines according to proper esd procedures. laser safety: radiation emitted by laser devices can be dangerou s to human eyes. avoid eye exposure to direct or indirect radiation. legal notice important notice! all information contained in this document is subject to change without notice, at source photonics? sole and absolute discretion. source photonics warrants performance of its products to current specifications only in accordance with the company?s standard one-year warranty; however, specifications designated as ?preliminary? are given to describe components only, and source photoni cs expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warr anties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. please re fer to the company?s terms and conditions of sale for further warranty information. source photonics assumes no liability fo r applications assistance, customer pr oduct design, software performance, or infringement of patents, services, or intellectual proper ty described herein. no license, either express or implied, is granted under any patent right, copyright, or inte llectual property right, and source photonics makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. source photonics customers using or selling products for use in such applications do so at t heir own risk and agree to fully defend and indemnify source photonics for any damages resulting from such use or sale. the information contained in this document is pr ovided on an ?as is? basis. customer agrees that source photonics is not liable fo r any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in th is document. customer must contact source photonics to obtain the latest version of this publication to verify, befo re placing any order, that the information contained herein is current. contact u.s.a. headquarters 20550 nordhoff street chatsworth, ca 91311 usa tel: +1-818-773-9044 fax: +1-818-773-0261 sales@sourcephotonics.com china building #2&5, west export processing zone no. 8 kexin road, hi-tech zone chengdu, 611731, china tel: +86-28-8795-8788 fax: +86-28-8795-8789 sales@sourcephotonics.com.cn ? taiwan 9f, no 81, shui lee rd. hsinchu, 300, taiwan r.o.c. tel: +886-3-5169222 fax: +886-3-5169213 sales@sourcephotonics.com.tw ? copyright source photonics, inc. 2007~2008 all rights reserved
|
