915 mhz saw filter 26 mhz bandwidth part number: SF0915BA02502S idt ? ?? ? saw products ? ?? ? 324 clark street, worcester, ma 01606, usa ? ?? ? ph 1-508-852-5400 ? ?? ? fax 1-508-852-8456 www.idt.com SF0915BA02502S rev b 8-aug-2008 ecn 36038 page 1 of 3 description ? 915 mhz saw bandpass filter with 26 mhz bandwidth. ? 3 x 3 mm ceramic lcc package. ? rohs compliant. typical performance
915 mhz saw filter 26 mhz bandwidth part number: SF0915BA02502S idt ? ?? ? saw products ? ?? ? 324 clark street, worcester, ma 01606, usa ? ?? ? ph 1-508-852-5400 ? ?? ? fax 1-508-852-8456 www.idt.com SF0915BA02502S rev b 8-aug-2008 ecn 36038 page 2 of 3 specification notes: 1. fixed reference point. 2. evaluated over 902 to 928 mhz. maximum ratings parameter min max units storage temperature range -40 85 ?c operating temperature range -10 70 ?c input power level - 10 dbm dc voltage - 10 volts matching circuit notes: 1. matching components are not required; 50 ohm si ngle-ended system. parameter min typ max units center frequency (f c ) 1 - 915.0 - mhz bandwidth (3db) 26 34 - mhz insertion loss 2 - 2.8 3.3 db passband amplitude ripple 2 - 1.1 1.5 db stopband rejection, 10-800 mhz 50 55 - db stopband rejection, 800-845 mhz 45 50 - db stopband rejection, 845-880 mhz 35 40 - db stopband rejection, 947-992 mhz 15 18 - db stopband rejection, 992-1020 mhz 35 40 - db stopband rejection, 1020-1200 mhz 45 50 - db temperature coefficient of frequency -30 ppm/k source and load impedance 50 //0nf
915 mhz saw filter 26 mhz bandwidth part number: SF0915BA02502S idt ? ?? ? saw products ? ?? ? 324 clark street, worcester, ma 01606, usa ? ?? ? ph 1-508-852-5400 ? ?? ? fax 1-508-852-8456 www.idt.com SF0915BA02502S rev b 8-aug-2008 ecn 36038 page 3 of 3 package outline suggested footprint marking iso 9001 registered all specifications are believed to be accurate and reliable. however, mnc reserves the right to make changes without notice. ? 2006 all rights reserved. units: mm typical tolerances are 0.15 mm except where indicated. pad configuration: input: 2 output: 5 ground: 1,3,4,6 package material: body: al 2 o 3 ceramic lid: kovar, ni plated terminations: au plating 1 em min, over a 1.3-8.9 em ni plating
|
