fiber optic connectors www.glenair.com e-mail: sales@glenair.com c-22 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2002 glenair, inc. printed in u.s.a. cage codes 06324 a thread size (table i) yellow band 1.99 (50.4) max see note 2 3 wire holes 1.03 (26.2) 1.01 (25.7) .125 (3.2) .105 (2.7) .188 (4.8) panel thickness mil-c-28876 style fiber optic connector for use with mil-t-29504/14 and /15 termini 04 jam nut mounted receptacle the standard fiber optic connector for shipboard use product series basic number finish symbol (table ii) 06 = plug assembly 03 = receptacle assembly, wall mtg. 04 = receptacle assembly, jam nut mtg. shell size (table i) 180- 040 nf 04- 13- 04- 1 p n n = without backnut and spacer (when using backshell) omit for with backnut and spacer insert designator: p = pin insert s = socket insert alternate keying position (table iv) insert arrangement, dash no. (table iii) master polarizing key a b c d g flat f hex corner h flat k dia recommended panel cutout c dia
fiber optic connectors www.glenair.com e-mail: sales@glenair.com c-23 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2002 glenair, inc. printed in u.s.a. cage codes 06324 notes: 1. metric dimensions (mm) are in parentheses and are for reference only. 2. backnut retained with thread locking compound. symbol m nf table ii: finish finish description electroless nickel cadmium/olive drab over electroless nickel (500 hour salt spray) shell size 11 13 15 table iii: insert arrangement insert arrangement dash no. 02 04 06 or 08 number of terminus cavities 2 4 6 or 8 shell size 11 and 13 15 table iv: alternate keying position keying position 1 2 3 4 5 6 1 2 3 4 5 6 a 95 113 90 53 119 51 80 135 49 66 62 79 b 141 156 145 156 146 141 142 170 169 140 145 153 c 208 182 195 220 176 184 196 200 200 200 180 197 d 236 292 252 255 298 242 293 310 244 257 280 272 mil-c-28876 style fiber optic connector for use with mil-t-29504/14 and /15 termini 04 jam nut mounted receptacle shell size 11 13 15 table i: shell size g flat + .010 (.005) 1.262 (32.1) 1.387 (35.2) 1.575 (40.0) f hex max 1.290 (32.8) 1.435 (36.4) 1.650 (41.9) c dia max .960 (24.4) 1.085 (27.6) 1.255 (31.9) h flat + .010 (.005) .848 (21.5) .973 (24.7) 1.160 (29.5) k dia + .010 (.005) .885 (22.5) 1.010 (25.7) 1.198 (30.4) "a" thread .ip- .2l-ds .750 .875 1.062
|