![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a23 5000 series - miniature toggle switches features materials contacts & terminals: gold plated brass, silver or gold plated silver actuator: chrome plated brass bushing: nickel plated brass housing: stainless steel or tin plated steel case: diallyl phthalate (dap) terminal seal: epoxy hardware: panel mounting models supplied with 2 hex nuts .314" (8mm) acro ss flats, 1 locking ring & 1 lockwasher. see hardware section of catalog. specifications contact ratings (resistive loads): gold plated brass; 0.4 volt-amps max. at 20 v max. silver; 3 amps at 250 vac, 6 amps at 125 vac or 4 amps at 30 vdc gold plated silver; 3 amps at 250 vac, 6 amps at 125 vac or 4 amps at 30 vdc. gold plating withstands up to 100 ma at 30 vdc. initial contact resistance: 10 milliohms maximum insulation resistance: 1000 megohms min. at 500 vdc dielectric strength: 1000 v rms min. - between terminals 1500 v rms min. - between poles and terminals and frame electrical life: gold: 100,000 cycles min. silver (at full load): sp & dp - 50,000 cycles min. 3p: 40,00 0 cycles min. 4p: 30,000 cycles min. operating temperature range: -40 c to +85 c about this series the material in this series is organized in the following seque nce: a. completely specified switch models: panel mounting panel and/or p.c. mounting p.c. mounting b. 'build your own switch' order format c. option drawings & special options d. panel cut-outs & miscellaneous agency recognition ul, csa, cecc, lnz, gam t1, qpl (europe), muahag, nato. availab ility: consult factory for details of recognized models. marking: to order switches marked ul, csa or cecc, complete the appropriate box of the ordering format. other listings do not a ppear on the switches. broadest selection offered in miniature switches. spdt, dpdt, 3pdt & 4pdt models with numerous options. numerous configurations for panel, panel & p.c. and p.c. mounti ng. extensive agency recognition (see below). also in this series 5000 series switches for peak currents - for switching power supplies, dc-dc converters, motors, etc. see specifications on last page of completely specified models. vde approved 5000 series models - see 55000 series following. a23-a40 10/6/00, 6:39 am 23
specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a24 5000 series - miniature toggle switches model no. circuit 5636ab on - on 5639ab on off on 5637ab mom off mom 5638ab on off mom 5632ab on - mom handle position (see dwg.) : iii ii i terminals 2-3 1-2 connected single pole - standard actuator - 1/4-40 threaded bushing - sol der lug terminals - silver contacts model no. circuit 5646ab on - on 5649ab on off on 5647ab mom off mom 5648ab on off mom 5642ab on - mom 5644thab* on on on 5644th1rab* on on mom 5644th2rab* mom on mom handle position (see dwg.) : iii ii i terminals 2-3 1-2 connected: 5-6 4-5 * function 4: sp in dp case. see diagram at end of section double pole - standard actuator - 1/4-40 threaded bushing - sol der lug terminals - silver contacts model no. circuit 5656ab on - on 5659ab on off on 5657ab mom off mom 5658ab on off mom 5652ab on - mom handle position (see dwg.) : iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 three pole - standard actuator - 1/4-40 threaded bushing - sold er lug terminals - silver contacts model no. circuit 5666ab on - o n 5669ab on off o n 5667ab mom off mom 5668ab on off mom 5662ab on - mom 5664thab* on on on 5664th1rab* on on mom 5664th2rab* mom on mom handle position iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 11-12 10-11 * function 4: sp in dp case. see diagram at end of section. four pole - standard actuator - 1/4-40 threaded bushing - solde r lug terminals -silver contacts (.039) (.039) 1.00 1.00 10.50 10.50 (.413) (.413) (.314) (.314) 8.00 8.00 (.031) (.031) 0.80 0.80 (.019) (.019) 0.50 0.50 24 24 (.118 dia) (.118 dia) 3.00 dia 3.00 dia (.070) (.070) 1.80 1.80 (.519) (.519) 13.20 13.20 7.00 7.00 (.275) (.275) (.185) (.185) 4.70 4.70 (.472) (.472) 12.00 12.00 (.145) (.145) 3.70 3.70 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns i i ii ii iii iii 3 3 2 2 1 1 epoxy epoxy 13.20 13.20 (.519) (.519) 24 24 3.00 dia 3.00 dia (.118 dia) (.118 dia) 1.80 1.80 4.75 4.75 (.070) (.070) (.187) (.187) 4.70 4.70 (.185) (.185) 0.80 0.80 (.031) (.031) 8.00 8.00 (.314) (.314) (.413) (.413) 10.50 10.50 3.70 3.70 (.145) (.145) 0.50 0.50 (.019) (.019) 12.00 12.00 (.472) (.472) 1.00 1.00 (.039) (.039) 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) (.472) (.472) 12.00 12.00 iii iii ii ii i i 1 1 2 2 3 3 6 6 5 5 4 4 epoxy epoxy 24 24 (.519) (.519) 13.20 13.20 (.118 dia) (.118 dia) 3.00 dia 3.00 dia (.070) (.070) 1.80 1.80 10.50 10.50 (.413) (.413) (.314) (.314) 8.00 8.00 (.039) (.039) 1.00 1.00 (.019) (.019) 0.50 0.50 (.031) (.031) 0.80 0.80 (.145) (.145) 3.70 3.70 (.516) (.516) 13.10 13.10 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns (.649) (.649) 16.50 16.50 (.187) (.187) 4.75 4.75 iii iii ii ii i i 3 3 2 2 1 1 7 7 8 8 9 9 (.185) (.185) 4.70 4.70 epoxy epoxy 13.20 13.20 1.80 1.80 3.00 dia 3.00 dia (.519) (.519) (.070) (.070) (.118 dia) (.118 dia) 3.70 3.70 (.145) (.145) 0.80 0.80 (.031) (.031) 0.50 0.50 (.019) (.019) 13.10 13.10 (.516) (.516) 1.00 1.00 (.039) (.039) 8.00 8.00 (.314) (.314) (.413) (.413) 10.50 10.50 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns (.834) (.834) 21.20 21.20 (.187) (.187) 4.75 4.75 24 24 iii iii ii ii i i 4.70 4.70 (.185) (.185) 12 12 11 11 10 10 7 7 8 8 9 9 epoxy epoxy keyway keyway keyway keyway a23-a40 10/6/00, 6:40 am 24 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a25 5000 series - miniature toggle switches model no. circuit 5636ab9 on - on 5639ab9 on off on 5637ab9 mom off mom 5638ab9 on off mom 5632ab9 on - mom handle position (see dwg.) : iii ii i terminals connected 2-3 1-2 single pole - flatted actuator - 1/4-40 threaded bushing - sold er lug terminals - silver contacts model no. circuit 5646ab9 on - on 5649ab9 on off on 5647ab9 mom off mom 5648ab9 on off mom 5642ab9 on - mom 5644thab9* on on on 5644th1rab9* on on mom 5644th2rab9* mom on mom handle position: iii ii i terminals 2-3 1-2 connected: 5-6 4-5 * function 4: sp in dp case. see diagram at end of section. double pole - flatted actuator - 1/4-40 threaded bushing - sold er lug terminals - silver contacts model no. circuit 5656ab9 on - on 5659ab9 on off on 5657ab9 mom off mom 5658ab9 on off mom 5652ab9 on - mom handle position (see dwg.) : iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 three pole - flatted actuator - 1/4-40 threaded bushing - solde r lug terminals - silver contacts model no. circuit 5666ab9 on - o n 5669ab9 on off o n 5667ab9 mom off mom 5668ab9 on off mom 5662ab9 on - mom 5664thab9* on on on 5664th1rab9* on on mom 5664th2rab9* mom on mom handle position iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 11-12 10-11 * function 4: sp in dp case. see diagram at end of section. four pole - flatted actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts (.039) (.039) 1.00 1.00 (.314) (.314) 8.00 8.00 (.031) (.031) 0.80 0.80 (.019) (.019) 0.50 0.50 24 24 (.070) (.070) 1.80 1.80 (.519) (.519) 13.20 13.20 7.00 7.00 (.275) (.275) (.185) (.185) 4.70 4.70 (.472) (.472) 12.00 12.00 (.145) (.145) 3.70 3.70 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns i i ii ii iii iii 3 3 2 2 1 1 (.196 dia) (.196 dia) (.448) (.448) 5.00 dia 5.00 dia 11.40 11.40 epoxy epoxy (.100) (.100) 2.54 2.54 13.20 13.20 (.519) (.519) 1.80 1.80 4.75 4.75 (.070) (.070) (.187) (.187) 4.70 4.70 (.185) (.185) 0.80 0.80 (.031) (.031) 3.70 3.70 (.145) (.145) 0.50 0.50 (.019) (.019) 12.00 12.00 (.472) (.472) (.472) (.472) 12.00 12.00 1 1 2 2 3 3 6 6 5 5 4 4 iii iii ii ii i i 24 24 1.00 1.00 (.039) (.039) 11.40 11.40 5.00 dia 5.00 dia (.448) (.448) (.196 dia) (.196 dia) 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) 8.00 8.00 (.314) (.314) 2.54 2.54 (.100) (.100) epoxy epoxy (.519) (.519) 13.20 13.20 (.070) (.070) 1.80 1.80 (.019) (.019) 0.50 0.50 (.031) (.031) 0.80 0.80 (.145) (.145) 3.70 3.70 (.516) (.516) 13.10 13.10 (.649) (.649) 16.50 16.50 (.187) (.187) 4.75 4.75 3 3 2 2 1 1 7 7 8 8 9 9 (.185) (.185) 4.70 4.70 (.100) (.100) 2.54 2.54 (.039) (.039) 1.00 1.00 24 24 i i ii ii iii iii (.314) (.314) 8.00 8.00 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns (.196 dia) (.196 dia) (.448) (.448) 5.00 dia 5.00 dia 11.40 11.40 epoxy epoxy 13.20 13.20 1.80 1.80 (.519) (.519) (.070) (.070) 3.70 3.70 (.145) (.145) 0.80 0.80 (.031) (.031) 0.50 0.50 (.019) (.019) 13.10 13.10 (.516) (.516) (.834) (.834) 21.20 21.20 (.187) (.187) 4.75 4.75 4.70 4.70 (.185) (.185) 12 12 11 11 10 10 7 7 8 8 9 9 11.40 11.40 5.00 dia 5.00 dia (.448) (.448) (.196 dia) (.196 dia) 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) 8.00 8.00 (.314) (.314) iii iii ii ii i i 24 24 1.00 1.00 (.039) (.039) 2.54 2.54 (.100) (.100) epoxy epoxy keyway keyway keyway keyway a23-a40 10/6/00, 6:40 am 25 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a26 5000 series - miniature toggle switches model no. circuit 5236za on - on 5239za on off on 5237za mom off mom 5238za on off mom 5232za on - mom handle position (see dwg.) : iii ii i terminals connected: 2-3 1-2 single pole - standard actuator - 1/4-40 threaded bushing - qui ck connect terminals - silver contacts model no. circuit 5246za on - o n 5249za on off o n 5247za mom off mom 5248za on off mom 5242za on - mom 5244thza* on on on 5244th1rza* on on mom 5244th2rza* mom on mom handle position iii ii i terminals 2-3 1-2 connected: 5-6 4-5 * function 4: sp in dp case. see diagram at end of section. double pole - standard actuator - 1/4-40 threaded bushing - qui ck connect terminals - silver contacts model no. circuit 5636mab on - on 5639mab on off on 5637mab mom off mom 5638mab on off mom 5632mab on - mom handle position (see dwg.) : iii ii i terminals connected: 2-3 1-2 single pole - large actuator - 15/32-32 threaded bushing - sold er lug terminals - silver contacts model no. circuit 5646mab on - on 5649mab on off on 5647mab mom off mom 5648mab on off mom 5642mab on - mom 5644mthab* on on on 5644mth1rab* on on mom 5644mth2rab* mom on mom handle position iii ii i terminals 2-3 1-2 connected: 5-6 4-5 * function 4: sp in dp case. see diagram at end of section. double pole - large actuator - 15/32-32 threaded bushing - sold er lug terminals - silver contacts 1.80 1.80 4.75 4.75 (.070) (.070) (.187) (.187) 4.70 4.70 (.185) (.185) 11.90 11.90 11.00 11.00 17.50 17.50 (.688) (.688) (.468) (.468) (.433) (.433) 24 24 3.70 3.70 (.145) (.145) 0.50 0.50 (.019) (.019) 0.80 0.80 (.031) (.031) (.519) (.519) 13.20 13.20 12.00 12.00 (.472) (.472) 5.00 dia 5.00 dia 11.9 dia-32uns 11.9 dia-32uns (15/32-32uns) (15/32-32uns) (.196 dia) (.196 dia) iii iii ii ii i i 1 1 2 2 3 3 6 6 5 5 4 4 (.031) (.031) 0.80 0.80 (.019) (.019) 0.50 0.50 (.070) (.070) 1.80 1.80 (.185) (.185) 4.70 4.70 (.145) (.145) 3.70 3.70 24 24 (.433) (.433) (.468) (.468) (.688) (.688) (.196 dia) (.196 dia) (15/32-32uns) (15/32-32uns) 13.20 13.20 (.519) (.519) (.275) (.275) 7.00 7.00 11.9 dia-32uns 11.9 dia-32uns 17.50 17.50 11.00 11.00 11.90 11.90 5.00 dia 5.00 dia iii iii ii ii i i 3 3 2 2 1 1 keyway keyway keyway keyway (.519) (.519) 13.20 13.20 7.00 7.00 (.275) (.275) 1.00 1.00 (.039) (.039) 13.10 13.10 (.515) (.515) 24 24 8.00 8.00 (.314) (.314) (.413) (.413) 10.50 10.50 0.78 0.78 4.70 4.70 5.30 5.30 (.208) (.208) (.030) (.030) (.185) (.185) 1.57 1.57 (.061) (.061) epoxy epoxy 1 1 2 2 3 3 i i ii ii iii iii 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) (.118 dia) (.118 dia) 3.00 dia 3.00 dia 3.00 dia 3.00 dia (.118 dia) (.118 dia) (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns 13.20 13.20 (.519) (.519) 12.00 12.00 (.472) (.472) 10.50 10.50 (.413) (.413) (.314) (.314) 8.00 8.00 24 24 (.515) (.515) 13.10 13.10 (.039) (.039) 1.00 1.00 (.185) (.185) (.030) (.030) (.187) (.187) (.208) (.208) 5.30 5.30 4.70 4.70 0.78 0.78 4.75 4.75 (.061) (.061) 1.57 1.57 epoxy epoxy 1 1 2 2 3 3 i i ii ii iii iii epoxy terminal seal is standard on these models. epoxy terminal seal is standard on these models. a23-a40 10/6/00, 6:40 am 26 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a27 5000 series - miniature toggle switches model no. circuit 5656mab on - on 5659mab on off on 5657mab mom off mom 5658mab on off mom 5652mab on - mom handle position (see dwg.) : iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 three pole - large actuator - 15/32-32 threaded bushing - solde r lug terminals - silver contacts model no. circuit 5666mab on - on 5669mab on off on 5667mab mom off mom 5668mab on off mom 5662mab on - mom 5664mthab* on on on 5664mth1rab* on on mom 5664mth2rab* mom on mom handle position iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 11-12 10-11 * function 4: sp in dp case. see diagram at end of section. four pole - large actuator - 15/32-32 threaded bushing - solder lug terminals - silver contacts model no. circuit 5636akb on - on 5639akb on off on 5637akb mom off mom 5638akb on off mom 5632akb on - mom handle position (see dwg.) : iii ii i terminals connected: 2-3 1-2 single pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts model no. circuit 5646akb on - on 5649akb on off on 5647akb mom off mom 5648akb on off mom 5642akb on - mom 5644thakb* on on on 5644th1rakb* on on mom 5644th2rakb* mom on mom handle position: iii ii i terminals 2-3 1-2 connected: 5-6 4-5 * function 4: sp in dp case. see diagram at end of section. double pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts 13.20 13.20 (.519) (.519) 24 24 3.00 dia 3.00 dia (.118 dia) (.118 dia) 1.80 1.80 4.75 4.75 (.070) (.070) (.187) (.187) 4.70 4.70 (.185) (.185) 0.80 0.80 (.031) (.031) 8.00 8.00 (.314) (.314) (.413) (.413) 10.50 10.50 3.70 3.70 (.145) (.145) 0.50 0.50 (.019) (.019) 12.00 12.00 (.472) (.472) 1.00 1.00 (.039) (.039) 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) (.472) (.472) 12.00 12.00 iii iii ii ii i i 1 1 2 2 3 3 6 6 5 5 4 4 (.070) (.070) 1.80 1.80 (.019) (.019) 0.50 0.50 (.031) (.031) 0.80 0.80 (.145) (.145) 3.70 3.70 (.187) (.187) 4.75 4.75 24 24 (.468) (.468) (.688) (.688) 17.50 17.50 11.90 11.90 (.476) (.476) 16.50 16.50 (.649) (.649) 12.10 12.10 5.00 dia 5.00 dia 11.9 dia-32uns 11.9 dia-32uns (15/32-32uns) (15/32-32uns) (.196 dia) (.196 dia) i i ii ii iii iii 3 3 2 2 1 1 13.20 13.20 (.519) (.519) 7 7 8 8 9 9 (.185) (.185) 4.70 4.70 1.80 1.80 (.070) (.070) (.187) (.187) 4.75 4.75 5.00 dia 5.00 dia 11.9 dia-32uns 11.9 dia-32uns (15/32-32uns) (15/32-32uns) (.196 dia) (.196 dia) 12.10 12.10 (.476) (.476) 11.90 11.90 17.50 17.50 (.688) (.688) (.468) (.468) 24 24 3.70 3.70 (.145) (.145) 0.80 0.80 (.031) (.031) 0.50 0.50 (.019) (.019) 21.20 21.20 (.834) (.834) i i ii ii iii iii (.519) (.519) 13.20 13.20 1 1 2 2 3 3 4.70 4.70 (.185) (.185) 12 12 11 11 10 10 (.039) (.039) 1.00 1.00 10.50 10.50 (.413) (.413) (.314) (.314) 8.00 8.00 (.031) (.031) 0.80 0.80 (.019) (.019) 0.50 0.50 24 24 (.118 dia) (.118 dia) 3.00 dia 3.00 dia (.070) (.070) 1.80 1.80 (.519) (.519) 13.20 13.20 7.00 7.00 (.275) (.275) (.185) (.185) 4.70 4.70 (.472) (.472) 12.00 12.00 (.145) (.145) 3.70 3.70 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns i i ii ii iii iii 3 3 2 2 1 1 keyway keyway keyway keyway epoxy terminal seal is standard on these models. epoxy terminal seal is standard on these models. epoxy terminal seal is standard on these models. epoxy terminal seal is standard on these models. a23-a40 10/6/00, 6:40 am 27 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a28 5000 series - miniature toggle switches model no. circuit 5656akb on - on 5659akb on off on 5657akb mom off mom 5658akb on off mom 5652akb on - mom handle position (see dwg.) : iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 three pole - standard actuator - 1/4-40 splashproof bushing - s older lug terminals - silver contacts model no. circuit 5666akb on - on 5669akb on off on 5667akb mom off mom 5668akb on off mom 5662akb on - mom 5664thakb* on on on 5664th1rakb* on on mom 5664th2rakb* mom on mom handle position: iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 11-12 10-11 * function 4: sp in dp case. see diagram at end of section. four pole - standard actuator - 1/4-40 splashproof bushing - so lder lug terminals - silver contacts single pole - locking actuator - 1/4-40 threaded bushing - sold er lug terminals - silver contacts double pole - locking actuator - 1/4-40 threaded bushing - sold er lug terminals - silver contacts model no. circuit 1 locked position 5636ab-1v on - on 2 locked positions 5636ab-2v on - on 3 locked positions 5639ab-3v on off on handle position (see dwg.) : iii ii i terminals connected: 2-3 1-2 model no. circuit 1 locked position 5646ab-1v on - on 2 locked positions 5646ab-2v on - on 3 locked positions 5649ab-3v on off on handle position (see dwg.) : iii ii i terminals 2-3 1-2 connected: 5-6 4-5 13.20 13.20 1.80 1.80 3.00 dia 3.00 dia (.519) (.519) (.070) (.070) (.118 dia) (.118 dia) 3.70 3.70 (.145) (.145) 0.80 0.80 (.031) (.031) 0.50 0.50 (.019) (.019) 13.10 13.10 (.516) (.516) 1.00 1.00 (.039) (.039) 8.00 8.00 (.314) (.314) (.413) (.413) 10.50 10.50 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns (.834) (.834) 21.20 21.20 (.187) (.187) 4.75 4.75 24 24 ? ? iii iii ii ii i i 4.70 4.70 (.185) (.185) 12 12 11 11 10 10 7 7 8 8 9 9 (.580) (.580) (.354) (.354) 14.75 14.75 9.00 9.00 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns (.584) (.584) 14.85 14.85 (.594) (.594) 15.10 15.10 (.145) (.145) 3.70 3.70 (.472) (.472) 12.00 12.00 (.019) (.019) 0.50 0.50 0.80 0.80 (.031) (.031) epoxy epoxy 1v 1v 3v 3v 2v 2v epoxy epoxy (.031) (.031) 0.80 0.80 0.50 0.50 (.019) (.019) 12.00 12.00 (.472) (.472) 3.70 3.70 (.145) (.145) 15.10 15.10 (.594) (.594) 14.85 14.85 (.584) (.584) 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) 9.00 9.00 14.75 14.75 (.354) (.354) (.580) (.580) 1v 1v 3v 3v 2v 2v (.187) (.187) 4.75 4.75 24 24 (.519) (.519) 13.20 13.20 (.118 dia) (.118 dia) 3.00 dia 3.00 dia (.070) (.070) 1.80 1.80 10.50 10.50 (.413) (.413) (.314) (.314) 8.00 8.00 (.039) (.039) 1.00 1.00 (.019) (.019) 0.50 0.50 (.031) (.031) 0.80 0.80 (.145) (.145) 3.70 3.70 (.516) (.516) 13.10 13.10 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns (.649) (.649) 16.50 16.50 (.187) (.187) 4.75 4.75 iii iii ii ii i i 3 3 2 2 1 1 7 7 8 8 9 9 (.185) (.185) 4.70 4.70 keyway keyway keyway keyway epoxy terminal seal is standard on these models. epoxy terminal seal is standard on these models. a23-a40 10/6/00, 6:40 am 28 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a29 5000 series - miniature toggle switches three pole - locking actuator - 1/4-40 threaded bushing - solde r lug terminals - silver contacts model no. circuit 1 locked position 5656ab-1v on - o n 2 locked positions 5656ab-2v on - o n 3 locked positions 5659ab-3v on off o n handle position (see dwg.) : iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 four pole - locking actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts model no. circuit 1 locked position 5666ab-1v on - on 2 locked positions 5666ab-2v on - on 3 locked positions 5669ab-3v on off on handle position (see dwg.) : iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 11-12 10-11 model no. circuit 5236cdb on - on 5239cdb on off on 5237cdb mom off mom 5238cdb on off mom 5232cdb on - mom handle position (see dwg.) : iii ii i terminals connected: 2-3 1-2 single pole - standard actuator - 1/4-40 threaded bushing - str aight p.c. terminals - gold or silver contacts double pole - standard actuator - 1/4-40 threaded bushing - str aight p.c. terminals - gold or silver contacts 13.20 13.20 (.519) (.519) 24 24 12.00 12.00 (.472) (.472) 3.00 dia 3.00 dia (.118 dia) (.118 dia) 4.75 4.75 (.187) (.187) 8.00 8.00 (.314) (.314) (.413) (.413) 10.50 10.50 1.00 1.00 (.039) (.039) 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) 4.00 4.00 (.157) (.157) 0.50 0.50 (.019) (.019) 0.80 0.80 (.031) (.031) 13.30 13.30 (.523) (.523) 1.10 1.10 (.043) (.043) 4.70 4.70 1.60 dia 1.60 dia (.063 dia) (.063 dia) (.185) (.185) (.187) (.187) 4.75 4.75 iii iii ii ii i i 1 1 2 2 3 3 4.70 4.70 (.185) (.185) 6 6 5 5 4 4 4.75 4.75 (.187) (.187) (.031) (.031) 0.80 0.80 0.50 0.50 (.019) (.019) 13.00 13.00 (.511) (.511) 3.70 3.70 (.145) (.145) 15.10 15.10 (.594) (.594) 14.85 14.85 (.584) (.584) 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) 9.00 9.00 14.75 14.75 (.354) (.354) (.580) (.580) 1v 1v 3v 3v epoxy epoxy 2v 2v (.580) (.580) (.354) (.354) 14.75 14.75 9.00 9.00 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns (.584) (.584) 14.85 14.85 (.594) (.594) 15.10 15.10 (.145) (.145) 3.70 3.70 (.511) (.511) 13.00 13.00 (.019) (.019) 0.50 0.50 0.80 0.80 (.031) (.031) (.187) (.187) 4.75 4.75 1v 1v 3v 3v 2v 2v epoxy epoxy keyway keyway keyway keyway (.039) (.039) 1.00 1.00 10.50 10.50 (.413) (.413) (.314) (.314) 8.00 8.00 (.031) (.031) 0.80 0.80 (.019) (.019) 0.50 0.50 24 24 (.118 dia) (.118 dia) 3.00 dia 3.00 dia (.519) (.519) 13.20 13.20 7.00 7.00 (.275) (.275) (.185) (.185) 4.70 4.70 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns (.523) (.523) (.157) (.157) 13.30 13.30 4.00 4.00 (.043) (.043) 1.10 1.10 (.185) (.185) (.063 dia) (.063 dia) 1.60 dia 1.60 dia 4.70 4.70 i i ii ii iii iii 3 3 2 2 1 1 epoxy terminal seal is standard on these models. epoxy terminal seal is standard on these models. note: above models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. * function 4: sp in dp case. see diagram at end of section. note: above models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. model no. circuit 5246cdb on - on 5249cdb on off on 5247cdb mom off mom 5248cdb on off mom 5242cdb on - mom 5244thcdb* on on on 5244th1rcdb* on on mom 5244th2rcdb* mom on mom handle position: iii ii i terminals 2-3 1-2 connected: 5-6 4-5 a23-a40 10/6/00, 6:40 am 29 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a30 5000 series - miniature toggle switches model no. circuit 5256cdb on - on 5259cdb on off on 5257cdb mom off mom 5258cdb on off mom 5252cdb on - mom handle position (see dwg.) : iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 three pole - standard actuator - 1/4-40 threaded bushing - stra ight p.c. terminals - gold or silver contacts model no. circuit 5266cdb on - o n 5269cdb on off o n 5267cdb mom off mom 5268cdb on off mom 5262cdb on - mom 5264thcdb* on on on 5264th1rcdb* on on mom 5264th2rcdb* mom on mom handle position iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 11-12 10-11 * function 4: sp in dp case. see diagram at end of section. four pole - standard actuator - 1/4-40 threaded bushing - strai ght p.c. terms. - gold or silver contacts model no. circuit 5236miwrcd on - o n 5239miwrcd on off o n 5237miwrcd mom off mom 5238miwrcd on off mom 5232miwrcd on - mom handle position (see dwg.) : iii ii i terminals connected: 2-3 1-2 single pole - standard actuator - 1/4-40 threaded bushing - wir e-wrap terminals - gold or silver contacts model no. circuit 5246miwrcd on - o n 5249miwrcd on off o n 5247miwrcd mom off mom 5248miwrcd on off mom 5242miwrcd on - mom 5244miwrthcd* on on on 5244miwrth1rcd* on on mom 5244miwrth2rcd* mom on mom handle position: iii ii i terminals 2-3 1-2 connected: 5-6 4-5 * function 4: sp in dp case. see diagram at end of section. double pole - standard actuator - 1/4-40 threaded bushing - wir e-wrap terminals - gold or silver contacts 1.00 1.00 (.039) (.039) 0.60 0.60 (.023) (.023) 0.60 0.60 (.023) (.023) 5.08 5.08 13.10 13.10 (.200) (.200) (.515) (.515) 24 24 8.00 8.00 (.314) (.314) (.413) (.413) 10.50 10.50 5.08 5.08 5.08 5.08 (.200) (.200) (.200) (.200) (.472) (.472) 12.00 12.00 (.519) (.519) 13.20 13.20 (.043 dia) (.043 dia) 1.10 dia 1.10 dia 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) (.118 dia) (.118 dia) 3.00 dia 3.00 dia (.665) (.665) 16.90 16.90 epoxy epoxy 3 3 2 2 1 1 iii iii ii ii i i 21.20 21.20 13.20 13.20 3.00 dia 3.00 dia (.834) (.834) (.519) (.519) 4.75 4.75 (.187) (.187) (.118 dia) (.118 dia) 8.00 8.00 (.314) (.314) (.413) (.413) 10.50 10.50 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns 14.40 14.40 (.567) (.567) 4.00 4.00 (.157) (.157) (.019) (.019) 1.00 1.00 (.039) (.039) 0.80 0.80 (.031) (.031) (.043) (.043) 1.10 1.10 4.70 4.70 (.185) (.185) (.187) (.187) 4.75 4.75 1.60 dia 1.60 dia (.063 dia) (.063 dia) 0.50 0.50 24 24 iii iii ii ii i i 4.70 4.70 (.185) (.185) 12 12 11 11 10 10 8 8 7 7 9 9 1.10 dia 1.10 dia (.043 dia) (.043 dia) (.200) (.200) 5.08 5.08 10.50 10.50 (.413) (.413) (.314) (.314) 8.00 8.00 24 24 (.515) (.515) 13.10 13.10 (.023) (.023) 0.60 0.60 (.039) (.039) 1.00 1.00 0.60 0.60 (.023) (.023) (.665) (.665) 16.90 16.90 (.275) (.275) 7.00 7.00 (.519) (.519) (.200) (.200) 5.08 5.08 13.20 13.20 epoxy epoxy 1 1 2 2 3 3 iii iii ii ii i i 3.00 dia 3.00 dia (.118 dia) (.118 dia) (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns (.519) (.519) 13.20 13.20 (.118 dia) (.118 dia) 3.00 dia 3.00 dia (.187) (.187) 4.75 4.75 16.50 16.50 (.649) (.649) 10.50 10.50 (.413) (.413) (.314) (.314) 8.00 8.00 (.039) (.039) 1.00 1.00 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns (.031) (.031) 0.80 0.80 (.019) (.019) 0.50 0.50 (.157) (.157) 4.00 4.00 (.567) (.567) 14.40 14.40 (.043) (.043) 1.10 1.10 (.185) (.185) 4.70 4.70 (.187) (.187) 4.75 4.75 (.063 dia) (.063 dia) 1.60 dia 1.60 dia 24 24 iii iii ii ii i i 3 3 2 2 1 1 7 7 8 8 9 9 (.185) (.185) 4.70 4.70 keyway keyway keyway keyway epoxy terminal seal is standard on these models. epoxy terminal seal is standard on these models. note: above models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. note: listed models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. note: above models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. note: listed models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. a23-a40 10/6/00, 6:41 am 30 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a31 5000 series - miniature toggle switches model no. circuit 5236wcdb16x404 on - on 5239wcdb16x404 on off on 5237wcdb16x404 mom off mom 5238wcdb16x404 on off mom 5232wcdb16x404 on - mom handle position (see dwg.) : iii ii i terminals connected: 2-3 1-2 single pole - short actuator - 1/4" smooth bushing - horizontal rt. angle p.c. terms. - gold or silver contacts model no. circuit 5246wcdb16x404 on - on 5249wcdb16x404 on off on 5247wcdb16x404 mom off mom 5248wcdb16x404 on off mom 5242wcdb16x404 on - mom 5244wthcdb16x404* on on on 5244wth1rcdb16x404* on on mom 5244wth2rcdb16x404* mom on mom handle position: iii ii i terminals 2-3 1-2 connected : 5-6 4-5 * function 4: sp in dp case. see diagram at end of section. double pole - short actuator - 1/4" smooth bushing - horizontal rt. angle p.c. terms. - gold or silver contacts model no. circuit 5256wcdb16 on - on 5259wcdb16 on off on 5257wcdb16 mom off mom 5258wcdb16 on off mom 5252wcdb16 on - mom handle position (see dwg.) : iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 three pole - short actuator - 1/4" smooth bushing - horizontal rt. angle p.c. terms. - gold or silver contacts model no. circuit 5236wwcdb16x445 on - on 5239wwcdb16x445 on off on 5237wwcdb16x445 mom off mom 5238wwcdb16x445 on off mom 5232wwcdb16x445 on - mom handle position (see dwg.): iii ii i terminals connected: 2-3 1-2 single pole - short actuator - 1/4" smooth bushing - vertical r t. angle p.c. terms. - gold or silver contacts 7.30 7.30 (.287) (.287) 2.67 dia 2.67 dia (.105) (.105) 3 3 i i 11.00 11.00 7.20 7.20 3.81 3.81 12.70 12.70 7.40 7.40 12.00 12.00 4.70 4.70 0.80 0.80 0.50 0.50 (.031) (.031) (.019) (.019) (.472) (.472) (.283) (.283) (.433) (.433) 24 24 (.291) (.291) (.185) (.185) (.150) (.150) (.500) (.500) (.196) (.196) (.500) (.500) (.150) (.150) 5.08 5.08 12.70 12.70 3.81 3.81 4.70 4.70 (.185) (.185) 1.60 dia 1.60 dia (.062 dia) (.062 dia) 3 3 6 6 ii ii iii iii 2 2 1 1 (.246 dia) (.246 dia) 6.25 dia 6.25 dia epoxy epoxy 1 1 2 2 iii iii ii ii (.185) (.185) 4.70 4.70 (.196) (.196) (.500) (.500) 5.08 5.08 12.70 12.70 (.062 dia) (.062 dia) 1.60 dia 1.60 dia (.500) (.500) (.185) (.185) (.291) (.291) (.246 dia) (.246 dia) 24 24 (.433) (.433) (.283) (.283) (.275) (.275) (.019) (.019) (.031) (.031) 6.25 dia 6.25 dia 7.00 7.00 0.50 0.50 0.80 0.80 4.70 4.70 7.20 7.20 11.00 11.00 7.40 7.40 12.70 12.70 i i 3 3 (.105) (.105) 2.67 dia 2.67 dia (.287) (.287) 7.30 7.30 epoxy epoxy 2.67 dia 2.67 dia 6.25 dia 6.25 dia (.246 dia) (.246 dia) (.105 dia) (.105 dia) (.150) (.150) (.564) (.564) (.283) (.283) 7.20 7.20 14.35 14.35 3.81 3.81 (.236) (.236) (.492) (.492) (.653) (.653) (.145) (.145) (.043) (.043) (.519) (.519) 13.20 13.20 3.70 3.70 6.00 6.00 12.5 12.5 16.60 16.60 1.10 1.10 3.81 3.81 14.35 14.35 5.08 5.08 (.150) (.150) (.564) (.564) (.196) (.196) (.185) (.185) 4.70 4.70 (.031) (.031) 0.80 0.80 (.062 dia) (.062 dia) 1.60 dia 1.60 dia (.185) (.185) (.019) (.019) 0.50 0.50 4.70 4.70 iii iii ii ii i i (.039) (.039) 1.00 1.00 4 4 5 5 6 6 24 24 7 7 9 9 5.08 5.08 (.200) (.200) (.334) (.334) 8.50 8.50 epoxy epoxy (.500) (.500) (.150) (.150) (.433) (.433) 24 24 (.246 dia) (.246 dia) (.043) (.043) (.275) (.275) (.200) (.200) (.039) (.039) (.150) (.150) (.500) (.500) (.200) (.200) (.062 dia) (.062 dia) (.301) (.301) i i ii ii iii iii 3.81 3.81 12.70 12.70 1.10 1.10 6.25 dia 6.25 dia 11.00 11.00 7.00 7.00 0.80 0.80 3.81 3.81 12.70 12.70 5.08 5.08 1.00 1.00 1.60 dia 1.60 dia 5.08 5.08 3.00 3.00 (.118) (.118) (.519) (.519) 13.20 13.20 3 3 2 2 1 1 6.85 6.85 (.269) (.269) (.283) (.283) 7.20 7.20 (.287) (.287) 7.30 7.30 (.105 dia) (.105 dia) 2.67 dia 2.67 dia epoxy epoxy note: above models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. note: above models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. note: above models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. note: listed models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. a23-a40 10/6/00, 6:41 am 31 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a32 5000 series - miniature toggle switches model no. circuit 5246wwcdb16x445 on - on 5249wwcdb16x445 on off on 5247wwcdb16x445 mom off mom 5248wwcdb16x445 on off mom 5242wwcdb16x445 on - mom 5244wwthcdb16x445* on on on 5244wwth1rcdb16x445* on on mom 5244wwth2rcdb16x445* mom on mom handle position: iii ii i terminals 2-3 1-2 connected: 5-6 4-5 * function 4: sp in dp case. see diagram at end of section. model no. circuit 5266wwcdb16x514 on - on 5269wwcdb16x514 on off on 5267wwcdb16x514 mom off mom 5268wwcdb16x514 on off mom 5262wwcdb16x514 on - mom 5264wwthcdb16x514* on on on 5264wwth1rcdb16x514* on on mom 5264wwth2rcdb16x514* mom on mom handle position: iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 11-12 10-11 * function 4: sp in dp case. see diagram at end of section. four pole - short actuator - 1/4" smooth bushing - vertical rt. angle p.c. terms. - gold or silver contacts model no. circuit 5256wwcdb16x514 on - on 5259wwcdb16x514 on off on 5257wwcdb16x514 mom off mom 5258wwcdb16x514 on off mom 5252wwcdb16x514 on - mom handle position: iii ii i terminals 2-3 1-2 connected: 5-6 4-5 8-9 7-8 model no. circuit 5236ycdb16x445 on - on 5239ycdb16x445 on off on 5237ycdb16x445 mom off mom 5238ycdb16x445 on off mom 5232ycdb16x445 on - mom handle position (see dwg.): iii ii i terminals connected: 2-3 1-2 3.81 3.81 (.150) (.150) 3.81 3.81 (.150) (.150) (.043) (.043) 1.10 1.10 (.834) (.834) (.187) (.187) 24 24 i i ii ii iii iii (.031) (.031) 5.08 5.08 (.200) (.200) 0.80 0.80 4.75 4.75 21.20 21.20 (.519) (.519) (.118) (.118) (.039) (.039) 13.20 13.20 3.00 3.00 1.00 1.00 9 9 8 8 7 7 12 12 11 11 10 10 1.60 dia 1.60 dia (.062 dia) (.062 dia) 4.75 4.75 (.187) (.187) 5.08 5.08 (.200) (.200) 6.25 dia 6.25 dia 2.67 dia 2.67 dia (.246 dia) (.246 dia) (.105 dia) (.105 dia) 7.25 7.25 (.271) (.271) 6.90 6.90 7.20 7.20 (.283) (.283) (.285) (.285) 12.45 12.45 (.490) (.490) (.564) (.564) 14.35 14.35 (.564) (.564) 14.35 14.35 epoxy epoxy (.125) (.125) (.620) (.620) (.275) (.275) (.511) (.511) (.161) (.161) 4.10 4.10 13.00 13.00 3.18 3.18 15.75 15.75 7.00 7.00 15.75 15.75 (.620) (.620) 3.18 3.18 (.125) (.125) (.185) (.185) 4.70 4.70 epoxy epoxy (.062 dia) (.062 dia) 1.60 dia 1.60 dia 1 1 2 2 3 3 0.40 0.40 (.015) (.015) (.050) (.050) 1.27 1.27 iii iii ii ii i i 24 24 (.246 dia) (.246 dia) 6.25 dia 6.25 dia (.105 dia) (.105 dia) 2.67 dia 2.67 dia (.283) (.283) 7.20 7.20 (.287) (.287) 7.30 7.30 13.20 13.20 (.519) (.519) 12.70 12.70 3.81 3.81 (.150) (.150) (.500) (.500) 11.00 11.00 (.433) (.433) 24 24 0.80 0.80 (.301) (.301) (.472) (.472) 5.08 5.08 (.200) (.200) 1.60 dia 1.60 dia 12.70 12.70 3.81 3.81 (.062 dia) (.062 dia) (.500) (.500) (.150) (.150) (.043) (.043) 1.10 1.10 (.187) (.187) 12.00 12.00 i i ii ii iii iii 4.75 4.75 (.118) (.118) 3.00 3.00 6 6 5 5 4 4 3 3 2 2 1 1 5.08 5.08 (.039) (.039) (.200) (.200) 1.00 1.00 (.187) (.187) 4.75 4.75 2.67 dia 2.67 dia (.105 dia) (.105 dia) 6.25 dia 6.25 dia (.246 dia) (.246 dia) (.269) (.269) 6.85 6.85 7.30 7.30 (.287) (.287) 7.20 7.20 (.283) (.283) epoxy epoxy (.105 dia) (.105 dia) (.246 dia) (.246 dia) 2.67 dia 2.67 dia 6.25 dia 6.25 dia (.150) (.150) 3.81 3.81 4.75 4.75 (.187) (.187) 1.10 1.10 (.043) (.043) (.649) (.649) (.150) (.150) 3.81 3.81 iii iii ii ii i i 16.50 16.50 (.031) (.031) 0.80 0.80 3.00 3.00 13.20 13.20 (.118) (.118) (.519) (.519) 1.00 1.00 (.039) (.039) (.200) (.200) 5.08 5.08 9 9 8 8 7 7 3 3 2 2 1 1 (.200) (.200) 5.08 5.08 (.062 dia) (.062 dia) 1.60 dia 1.60 dia 4.75 4.75 (.187) (.187) (.490) (.490) 12.45 12.45 (.285) (.285) 24 24 (.283) (.283) 7.20 7.20 6.90 6.90 (.271) (.271) 7.25 7.25 (.564) (.564) 14.35 14.35 (.564) (.564) 14.35 14.35 epoxy epoxy double pole - short actuator - 1/4" smooth bushing - vertical r t. angle p.c. terms. - gold or silver contacts three pole - short actuator - 1/4" smooth bushing - vertical rt . angle p.c. terms. - gold or silver contacts single pole - short actuator - 1/4" smooth bush. - straight p.c . terms. - bracket mtg. - gold or silver contacts note: above models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. note: above models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. note: listed models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. note: listed models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. a23-a40 10/6/00, 6:41 am 32 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a33 5000 series - miniature toggle switches model no. circuit 5246ycdb16x445 on - on 5249ycdb16x445 on off on 5247ycdb16x445 mom off mom 5248ycdb16x445 on off mom 5242ycdb16x445 on - mom 5244ythcdb16x445* on on on 5244yth1rcdb16x445* on on mom 5244yth2rcdb16x445* mom on mom handle position: iii ii i terminals 2-3 1-2 connected: 5-6 4-5 * function 4: sp in dp case. see diagram at end of section. double pole - paddle actuator - 1/4" threaded bushing - solder lug terminals - silver contacts model no. circuit 5636ab4n+u242n on - on 5639ab4n+u242n on off on 5637ab4n+u242n mom off mom 5638ab4n+u242n on off mom 5632ab4n+u242n on - mom handle position: iii ii i terminals connected: 2-3 1-2 above models have black paddle. single pole - paddle actuator - 1/4" threaded bushing - solder lug terminals - silver contacts model no. circuit 5646ab4n+u242n on - on 5649ab4n+u242n on off on 5647ab4n+u242n mom off mom 5648ab4n+u242n on off mom 5642ab4n+u242n on - mom 5644thab4n+u242n* on on on 5644th1rab4n+u242n* on on mom 5644th2rab4n+u242n* mom on mom handle position: iii ii i terminals connected: 2-3 1-2 5-6 4-5 *function 4: sp in dp case. see diagram at end of section above models have black paddle. (.039) (.039) 1.00 1.00 (.314) (.314) 8.00 8.00 (.031) (.031) 0.80 0.80 (.019) (.019) 0.50 0.50 (.070) (.070) 1.80 1.80 (.519) (.519) 13.20 13.20 7.00 7.00 (.275) (.275) (.185) (.185) 4.70 4.70 (.472) (.472) 12.00 12.00 (.145) (.145) 3.70 3.70 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns i i ii ii iii iii 3 3 2 2 1 1 (.496) (.496) 12.60 12.60 (.259) (.259) (.208) (.208) (.088) (.088) 2.25 2.25 6.60 6.60 5.30 5.30 (.557) (.557) 14.15 14.15 24 24 epoxy epoxy 13.20 13.20 (.519) (.519) 1.80 1.80 4.75 4.75 (.070) (.070) (.187) (.187) 4.70 4.70 (.185) (.185) 0.80 0.80 (.031) (.031) 3.70 3.70 (.145) (.145) 0.50 0.50 (.019) (.019) 12.00 12.00 (.472) (.472) (.472) (.472) 12.00 12.00 1 1 2 2 3 3 6 6 5 5 4 4 14.15 14.15 (.557) (.557) 6.60 6.60 (.259) (.259) 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) 8.00 8.00 (.314) (.314) 24 24 5.30 5.30 2.25 2.25 (.088) (.088) (.208) (.208) 12.60 12.60 (.496) (.496) iii iii ii ii i i 1.00 1.00 (.039) (.039) epoxy epoxy (.620) (.620) 15.75 15.75 (.125) (.125) 3.18 3.18 15.75 15.75 3.18 3.18 (.620) (.620) (.125) (.125) 4.75 4.75 8.20 8.20 4.70 4.70 (.185) (.185) (.187) (.187) (.322) (.322) iii iii (.472) (.472) (.511) (.511) (.185) (.185) 12.00 12.00 4.70 4.70 13.00 13.00 epoxy epoxy (.062 dia) (.062 dia) 1.60 dia 1.60 dia 3 3 2 2 1 1 (.015) (.015) (.050) (.050) 0.40 0.40 1.27 1.27 ii ii i i 7.20 7.20 (.283) (.283) 24 24 (.271) (.271) 6.90 6.90 2.67 dia 2.67 dia (.105 dia) (.105 dia) 6.25 dia 6.25 dia (.246 dia) (.246 dia) keyway keyway double pole - short actuator - 1/4" smooth bush. - straight p.c . terms. - bracket mtg. - gold or silver contacts note: listed models have gold contacts. substitute ' a ' for ' cd ' for silver contacts. a23-a40 10/6/00, 6:41 am 33 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a34 5000 series - miniature toggle switches 5000 series switches for peak currents 2-120 amps at 60 vdc - 10,000 cycles minimum. 3-40 amps at 125/250 vac - 10,000 cycles minimum. silver nickel alloy (agni) contacts. other specifications same as 5000 series. also see 'switches for peak currents' technical page in rear of catalog. double pole - standard actuator - 1/4-40 threaded bushing - sol der lug terminals model no. circuit 5636abx814 on - on model no. circuit 5646abx814 on - o n single pole - standard actuator - 1/4-40 threaded bushing - sol der lug terminals 13.20 13.20 (.519) (.519) 24 24 3.00 dia 3.00 dia (.118 dia) (.118 dia) 1.80 1.80 4.75 4.75 (.070) (.070) (.187) (.187) 4.70 4.70 (.185) (.185) 0.80 0.80 (.031) (.031) 8.00 8.00 (.314) (.314) (.413) (.413) 10.50 10.50 3.70 3.70 (.145) (.145) 0.50 0.50 (.019) (.019) 12.00 12.00 (.472) (.472) 1.00 1.00 (.039) (.039) 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) (.472) (.472) 12.00 12.00 iii iii ii ii i i 1 1 2 2 3 3 6 6 5 5 4 4 epoxy epoxy keyway keyway (.039) (.039) 1.00 1.00 10.50 10.50 (.413) (.413) (.314) (.314) 8.00 8.00 (.031) (.031) 0.80 0.80 (.019) (.019) 0.50 0.50 24 24 (.118 dia) (.118 dia) 3.00 dia 3.00 dia (.070) (.070) 1.80 1.80 (.519) (.519) 13.20 13.20 7.00 7.00 (.275) (.275) (.185) (.185) 4.70 4.70 (.472) (.472) 12.00 12.00 (.145) (.145) 3.70 3.70 (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns i i ii ii iii iii 3 3 2 2 1 1 epoxy epoxy a23-a40 10/6/00, 6:41 am 34 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com model structure: 'build your own switch' order format fill in boxes with selections shown for model structure , then add options selections for complete model number. allowable options are shown below each respective box. note 'none' indicates box may be left empty. additional ordering information: commonly ordered models are shown on prior pages with complete model numbers and spec- ifications. below is an order format that enables you to 'build your own switch' and specify the correct switch model number b y simply selecting from all available options shown and filling i n the boxes. 5 3 single pole 4 double pole 5 three pole 6 four pole (none) m solder lugs with 15/32-32 (11.9mm) bushing mi wr wire-wrap (epoxy term. seal standard) w horizontal right angle p.c. ww vertical right angle p.c. y straight p.c. w/mounting brk't. z quick connect (epoxy term. seal standard) 5000 series - miniature toggle switches series terminals number electric al terminals (for function 4 models only) contact & bushings of poles fun ctions conne ctions /functions materials (none) th on on on th1r on on mom th2r mom on mom 2 straight p.c.,right angle, quick con- nect or wire-wrap terminals with 1/4- 40 (6.35mm) threaded bushing. 6 solder lug term- inals with 1/4-40 (6.35mm) or 15/32- 32 (11.9mm) threaded bushings. 6 on - on 9 on off on 7 mom off mom 8 on off mom 2 on - mom 4* on on on 4* on 0n mom 4* mom on mom * specify selection from 'connections/ functions' box also - (for double & four pole only). a silver ad silver, gold plated cd brass, gold plated options: black finish sealing actuators a gency recognition special options caps and paddles (none) g matte black finish on bush- ing, actuator & hardware. (none) unless standard - (see terminals above) b epoxy sealed terminals k front panel sealing with o-ring & gasket. kb both of above (none) ul csa vde lnz tele- communications listing gam military listing (consult factory for details of approved models). (none) caps u270 u1710 u640 paddles u240n u290n u390n (see drawings and color codes). examples of completely specified model numbers: 5636ab, 5244wwth2rab16ul (none) 13 standard 2 7 8 flat 9 flat 12 flat 16 17 21 insulated 22 23 24 large (long) 25 27 large (short) 4n for pad- dles only 1v locking (1 position) 2v locking (2 positions) 3v locking (3 positions) (see actuator drawings). a35 (none) see listing on pg. c39 although most combinations of options are available, some may r esult in incompatibilities. consult factory if there is any que stion. a23-a40 10/6/00, 6:41 am 35 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a36 5000 series - miniature toggle switches sealing option drawings (none) indicates no terminal sealing. b indicates epoxy terminal sealing. note: for models with ' z ' and ' miwr ' epoxy terminal sealing is standard and need not be specified with ' b '. k indicates front panel sealing with o-ring (1) and gasket (2) to protect the switch from water and dust. withstands 1 bar pressure. available on models with 1/4" (6.35mm) or 15/32" (11.9mm) threaded bushings. not available with actuators 8,9, 12, 22 or 23. k b includes both b and k above. k with 1/4" (6.35mm) keyway bushing k with 15/32" (11.9mm) flatted bushing includes gasket washer u360 includes gasket washer u60 actuators for 1/4" (6.35mm) threaded bushings 13 standard 2 4n for use with paddles only 8 not available with option k 9 not available with option k 12 not available with option k 16 17 21 specify u640 insulative exten- sion with this act- uator and replace '0' with color selection below. 1 blue 2 black 3 green 4 grey 5 yellow 6 red 7/1 white 9 orange 22 not available with option k 23 not available with option k 3.00 dia 3.00 dia 1.00 1.00 9.00 9.00 10.50 10.50 (.039) (.039) (.354) (.354) (.413) (.413) (.118 dia) (.118 dia) (.118) (.118) (.629) (.629) 3.00 dia 3.00 dia 16.00 16.00 (.354) (.354) 9.00 9.00 (.196 dia) (.196 dia) (.838) (.838) 21.30 21.30 5.00 dia 5.00 dia (.196 dia) (.196 dia) (.448) (.448) 5.00 dia 5.00 dia 11.40 11.40 (.165 dia) (.165 dia) (.248) (.248) 4.20 dia 4.20 dia 6.30 6.30 (.354 dia) (.354 dia) (.216) (.216) 2.70 dia 2.70 dia 5.50 5.50 (.110 dia) (.110 dia) (.275) (.275) 2.80 dia 2.80 dia 7.00 7.00 (.129) dia) (.129) dia) (.838) (.838) 3.30 dia 3.30 dia 21.30 21.30 (.645) (.645) 16.40 16.40 (.129 dia) (.129 dia) (.838) (.838) 3.30 dia 3.30 dia 21.30 21.30 (.129 dia) (.129 dia) (.551) (.551) 3.30 dia 3.30 dia 14.00 14.00 (.157 max) (.157 max) 2 2 1 1 4 maxi 4 maxi 1 1 (.118 max) (.118 max) 3 maxi 3 maxi 2 2 25 not available with option k (.129 dia) (.129 dia) (.642) (.642) 3.30 dia 3.30 dia 16.30 16.30 a23-a40 10/6/00, 6:42 am 36 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a37 5000 series - miniature toggle switches option drawings (cont'd.) actuators for 15/32" (11.9mm) threaded bushings 24 27 1v 1 locked position (function 6) 2v 2 locked positions (function 6) 3v 3 locked positions (functions 9 & 4) locking actuators for 1/4" (6.35mm) threaded bushings other locking actuator styles available - consult factory. actuators for smooth bushing models (w, ww & y) 13 standard 2 4n for use with paddles only 7 16 17 21 specify u640 insulative extension with this actuator and replace '0' with color selection. colors 1 blue 2 black 3 green 4 grey 5 yellow 6 red 7/1 white 9 orange note that for switches with mounting brackets, the actuator length may be reduced by .015" (0.4mm). refer to individual switch drawings. ' (.196 dia) (.196 dia) (.460) (.460) (.468) (.468) 11.70 11.70 11.90 11.90 5.00 dia 5.00 dia (.584) (.584) (.354) (.354) (1/4-40uns) (1/4-40uns) 14.85 14.85 9.00 9.00 6.35 dia-40uns 6.35 dia-40uns (.580) (.580) (.354) (.354) (1/4-40uns) (1/4-40uns) 14.75 14.75 9.00 9.00 6.35 dia-40uns 6.35 dia-40uns (.204 dia) (.204 dia) (.594) (.594) (.354) (.354) (1/4-40uns) (1/4-40uns) 9.00 9.00 15.10 15.10 5.20 dia 5.20 dia 6.35 dia-40uns 6.35 dia-40uns (.118 dia) (.118 dia) (.531) (.531) (.236) (.236) (.039) (.039) 13.50 13.50 6.00 6.00 1.00 1.00 3.00 dia 3.00 dia 3.00 dia 3.00 dia (.118 dia) (.118 dia) (.748) (.748) 19.00 19.00 (.472) (.472) 12.00 12.00 (.263) (.263) (.102 dia) (.102 dia) 2.60 dia 2.60 dia 6.70 6.70 (.106 dia) (.106 dia) (.334) (.334) 2.70 dia 2.70 dia 8.50 8.50 (.110 dia) (.110 dia) (.393) (.393) 2.80 dia 2.80 dia 10.00 10.00 (.129 dia) (.129 dia) (.956) (.956) (.645) (.645) 3.30 dia 3.30 dia 24.30 24.30 16.40 16.40 (.688) (.688) (.468) (.468) 17.50 17.50 11.90 11.90 5.00 dia 5.00 dia (.196 dia) (.196 dia) a23-a40 10/6/00, 6:42 am 37 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a38 5000 series - miniature toggle switches option drawings (cont'd.) actuators for switches with x404 and x445 options (see 'special options' pages following) 13 standard 2 4n for use with paddles only 8 not available w/function 2 (on - mom) 9 not available w/function 2 (on - mom) 12 not available w/function 2 (on - mom) 16 17 21 specify u640 insulative extension with this actuator and replace '0' with color selection below. colors 1 blue 2 black 3 green 4 grey 5 yellow 6 red 7/1 white 9 orange 23 22 not available with sealing option k or x408 insulating caps (replace '0' in part numbers below with color code) u270 for actuator 13 and threaded bushing only u1040 for actuator 13 and smooth bushing only u1710 for actuator 17 and threaded bushing or actuator 7 and smooth bushing only (.700) (.700) 17.80 17.80 (.425) (.425) 10.80 10.80 (.909) (.909) 23.10 23.10 (.519) (.519) 13.20 13.20 (.318) (.318) 8.10 8.10 (.287) (.287) 7.30 7.30 (.346) (.346) 8.80 8.80 16.40 16.40 (.645) (.645) (.909) (.909) 23.10 23.10 (.909) (.909) 23.10 23.10 (.622) (.622) 15.80 15.80 (.433) (.433) 11.00 11.00 (.137 dia) (.137 dia) 3.5 dia 3.5 dia (.531) (.531) 13.50 13.50 (.137 dia) (.137 dia) 3.5 dia 3.5 dia (.287) (.287) 7.30 7.30 (.137 dia) (.137 dia) 3.5 dia 3.5 dia 1.00 1.00 (.039) (.039) (.484) (.484) (.283) (.283) 12.30 12.30 7.20 7.20 a23-a40 10/6/00, 6:42 am 38 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com 5000 series - miniature toggle switches option drawings (cont'd.) paddles for actuator 4n only. mat'l: ul94hb polyamide (replace '0' in part numbers belo w with color code from preceeding pg.) u240n u290n u390n special options f tin plated terminals (for p.c. terminals only). x371 smooth bushing .246" (6.25mm) instead of standard threaded bush ing. x372 threaded bushing 1/4" (6.35mm). height .274" (7mm). x386 threaded bushing 1/4" (6.35mm) to replace plain bushing on mode ls with w, ww & y . x404 switches with w option with short actuator and offset terminal bends (see page a25). x435 .732" (18.6mm) long p.c. terminals - epoxy terminal seal stand ard. x438 smooth bushing .246" (6.25mm). height.283" (7.2mm) without shou lder. x442 threaded bushing 1/4" (6.35mm). height .389" ( 9.9mm). x445 smooth bushing .283" (7.2mm) for w, ww & y models. available with same actuators, insulating cap and paddles as x404. x500 threaded bushing 1/4" (6.35mm). height .354" (9mm) without shou lder. x507 .293" (10mm) long p.c. terminals. x512 1.062" (27mm) long p.c. terminals - epoxy terminal seal standa rd. x514 spacing .564" (14.35mm) instead of .500" (12.7mm) for 3 and 4 pole ww models. x515 smooth bushing .246" (6.25mm) without shoulder. x601 silver plated brass contacts. ratings - 0.2 amps 250 vac, 0.4 a mps 125 vac or 0.5 amps 30 vdc. electrical life : 20,000 cycles min . minimum quantity: 5000 pcs. x681 satin chrome actuator for flat actuators. x729 1/299" (33mm) long p.c. terminals. x764 special customer specified marking. x769 red anodized locking lever top. x806 smooth bushing .246" (6.25mm) instead of standard threaded bushing and silver plated brass contacts. x814 switches for peak current. see pg. a28. x916 locking lever on model with smooth bushing. x371 x372 x386 x442 x438 x500 x445 x514 x515 x916 a39 printed circuit terminal lengths option length l x435 .732 (18.6mm) x507 .293 (10mm) x512 1.062 (27mm) x729 1.299 (33mm) (.496) (.496) 12.60 12.60 (.259) (.259) (.208) (.208) (.088) (.088) 2.25 2.25 6.60 6.60 5.30 5.30 (.557) (.557) (.354) (.354) (1/4-40uns) (1/4-40uns) 14.15 14.15 9.00 9.00 6.35 dia-40uns 6.35 dia-40uns (.787) (.787) 20.00 20.00 (.433) (.433) (.236) (.236) (.078) (.078) 2.00 2.00 11.00 11.00 6.00 6.00 (.848) (.848) (.354) (.354) 21.55 21.55 9.00 9.00 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) (.842) (.842) 21.40 21.40 (.433) (.433) (.551) (.551) (.708) (.708) (.236) (.236) (.078) (.078) 2.00 2.00 6.00 6.00 11.00 11.00 14.00 14.00 18.00 18.00 9.00 9.00 21.55 21.55 (.354) (.354) (.848) (.848) 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) (.275) (.275) (.039) (.039) 7.00 7.00 1.00 1.00 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) (.354) (.354) (.039) (.039) 9.00 9.00 1.00 1.00 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) (.283) (.283) (.246 dia) (.246 dia) 6.25 dia 6.25 dia 7.20 7.20 (.389) (.389) (.011) (.011) 0.30 0.30 9.90 9.90 6.35 dia-40uns 6.35 dia-40uns (1/4-40uns) (1/4-40uns) (.283) (.283) (.039) (.039) 7.20 7.20 1.00 1.00 6.25 dia 6.25 dia (.246 dia) (.246 dia) (.354) (.354) (1/4-40uns) (1/4-40uns) 6.35 dia-40uns 6.35 dia-40uns 9.00 9.00 (.564) (.564) 14.35 14.35 (.236) (.236) 6.00 6.00 6.25 dia 6.25 dia (.246 dia) (.246 dia) (.580) (.580) (.354) (.354) 14.75 14.75 9.00 9.00 (.039) (.039) (.246 dia) (.246 dia) 6.25 6.25 1.00 1.00 l l (.236) (.236) (.039) (.039) 6.00 6.00 1.00 1.00 6.25 dia 6.25 dia (.246 dia) (.246 dia) a23-a40 10/6/00, 6:42 am 39 specifications subject to change without notice a apem , po box 8288, haverhill, ma usa 01835-0788 toll free: (877 ) 246-7890 fax: (781) 245-4531 e-mail: info@apem.com a40 5000 series - miniature toggle switches panel cut-outs & miscellaneous panel cut-outs for 1/4" (6.35mm) bushings standard (with locking ring supplied) with k sealing option standard (with locking ring supplied) with k sealing option panel cut-outs for 15/32" (11.9mm) bushings wiring for function 4 switch equivalent to single pole 3 throw switch. dotted lines between terminals 2 & 6 and 8 & 12 indicate external jumpers to be adde d by customer. (.255 dia) (.255 dia) 6.50 dia 6.50 dia 1.10 1.10 2.70 2.70 (.106) (.106) (.043) (.043) (.377) (.377) (.200) (.200) (.066) (.066) (.492 dia) (.492 dia) (.137 dia) (.137 dia) 12.50 dia 12.50 dia 9.60 9.60 3.50 dia 3.50 dia 5.10 5.10 1.70 1.70 12.50 dia 12.50 dia (.492 dia) (.492 dia) 5.20 5.20 2.20 dia 2.20 dia 6.50 dia 6.50 dia (.086 dia) (.086 dia) (.255 dia) (.255 dia) (.204) (.204) 12 12 11 11 10 10 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 12 12 11 11 10 10 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 iii iii ii ii i i s.9 iii s.9 iii s.7 ii s.7 ii s.10i s.10i e e 11 11 5 5 s.3 iii s.3 iii s.1 ii s.1 ii s.4 i s.4 i e e 4 4 5 5 6 6 4 4 5 5 6 6 4 4 5 5 6 6 th th above diagrams are viewed from bottom of switch. a23-a40 10/6/00, 6:43 am 40 |
Price & Availability of 5258WWAB16X514
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |