![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
telecom-, signal and rf relays axicom ft2/fu2 relay 108-98004 ? sep. 08 rev. g ? ecoc: jm10
108-98004 rev. g all specifcations subject to change. consult tyco electronics for latest specifcations. 2 of 14 telecom-, signal and rf relays ft2/fu2 relay axicom index dimensions 4 coil operating range 5 coil data and ordering information 6 contact data 9 insulation 10 general data 10 packing 12 disclaimer while tyco electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, tyco electronics does not guarantee that it is error-free, nor does tyco electronics make any other representati - on, warranty or guarantee that the information is accurate, correct, reliable or current. tyco electronics reserves the right to make any adjustments to the information contai - ned herein at any time without notice. tyco electronics expressly disclaims all implied warranties (and all express warranties, except as otherwise stated in this datasheet) regarding the information contained herein, including but not limited to any implied warranties or merchantability or ftness for a particular purpose. it is recommended that you test any new or replacement product before incorpo - rating into a system. the dimensions in this datasheet are for reference purpo - se only and are subject to change without notice. specif - cations are subject to change without notice. ul 508 file no. e 111441 ul 60950 iec/en60950 iec ref. cert. no. 3268 108-98004 rev. g all specifcations subject to change. consult tyco electronics for latest specifcations. 3 of 14 telecom-, signal and rf relays ft2/fu2 relay axicom 2 pole telecom/signal relay through hole type (tht) surface mount typ (smt) non-polarized, non-latching 1 coil rohs compliant (directive 2002/95/ec) as per product date code 0427. features ? telecom/signal relay (dry circuit, test access, ringing) ? slim line 15 x 7.5 mm, 0.59 x 0.295 inch ? switching current 2 a ? 2 changeover contacts (2 form c / dpdt) ? bifurcated contacts ? high sensitive 24 v and 48 v coil versions ? meets telcordia gr 1089, fcc part 68 and itu-t k20 2500 v between coil and contacts typical applications ? communications equipment linecard application C analog, isdn, xdsl, pabx voice over ip ? offce and business equipment ? measurement and control equipment ? consumer electronics set top boxes, hifi ? medical equipment options ? high dielectric version (hdv) with > 6000 v surge voltage between coil and contacts ? suitable for 125 c ambient temperature insulation category supplementary insulation according iec / en 60950 and ul 60950 working voltage 300 vrms mains supply voltage 250 vrms repetitive peak voltage 1500 v pollution degree internal: 1 external: 2 flammability classifcation v-0 maximum operating temperature 85 c 108-98004 rev. g all specifcations subject to change. consult tyco electronics for latest specifcations. 4 of 14 telecom-, signal and rf relays ft2/fu2 relay axicom dimensions dimensions in mm ft2 tht fu2 smt long terminals fu2 smt short terminals mm inch mm inch mm inch l w h 15.0 0.05 7.5 0.05 9.6 0.03 0.590 0.002 0.295 0.002 0.377 0.001 15.0 0.05 7.5 0.05 10.0 0.15 0.590 0.002 0.295 0.002 0.393 0.006 15.0 0.05 7.6 0.05 10.0 0.15 0.590 0.002 0.295 0.002 0.393 0.006 t t1 t2 tw s 3.30 0.30 n/a 5.08 0.50 0.35 0.03 0.129 0.011 n/a 0.200 0.020 0.013 0.001 n/a 9.2 0.2 5.08 0.50 n/a n/a 0.362 0.008 0.200 0.020 n/a n/a 7.5 0.2 5.08 0.50 n/a n/a 0.295 0.008 0.200 0.020 n/a ft2: tht version mounting hole layout view onto the component side of the pcb (top view) terminal assignment relay C top view non-latching 1 coil not energized condition fu2: smt version long terminals (w) short terminals (n) solder pad layout view onto the component side of the pcb (top view) long terminals short terminals coplanarity 0.1mm coplanarity 0.1mm 108-98004 rev. g all specifcations subject to change. consult tyco electronics for latest specifcations. 5 of 14 telecom-, signal and rf relays ft2/fu2 relay axicom 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 coil operating range u nom = nominal coil voltage umax. = upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized uop. min. = lower limit of the operative range of the coil voltage (reliable operate voltage) urel. min. = lower limit of the operative range of the coil voltage (reliable release voltage) 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 10 0 11 0 12 0 13 0 14 0 u nom. nominal coil voltage u op. min. u rel. min. u max. at 0 a u max. at 2 x 2 a u max. at 2 x 1 a ambient temperature [c] coil voltage [u/u nom ] 200 mw coil 240 mw coil 300 mw coil u nom. nominal coil voltage u op. min. u rel. min. u max. at 0 a u max. at 2 x 2 a u max. at 2 x 1 a ambient temperature [c] coil voltage [u/u nom ] 108-98004 rev. g all specifcations subject to change. consult tyco electronics for latest specifcations. 6 of 14 telecom-, signal and rf relays ft2/fu2 relay axicom coil data (values at 23 c) ordering information nominal voltage unom operate/set voltage range release/ reset voltage minimum coil power coil resistance relay code tyco part number minimum voltage umin maximum voltage umax vdc vdc vdc vdc mw ? / 10 % sensitive version tht non-latching 3 2.25 6.8 0.30 200 45 d3421 1462035-9 4 3.00 9.0 0.40 200 80 d3429 1-1462035-9 4.5 3.38 10.1 0.45 200 101 d3422 1-1462035-0 5 3.75 11.2 0.50 200 125 d3423 1-1462035-1 6 4.50 13.5 0.60 200 180 d3424 1-1462035-2 9 6.75 20.3 0.90 200 405 d3425 1-1462035-3 12 9.00 27.0 1.20 200 720 d3426 1-1462035-4 24 18.00 47.5 2.40 240 2400 d3427 1-1462035-7 48 36.00 95.0 4.80 240 9600 d3428 1-1462035-8 smt long terminals, non-latching 3 2.25 6.8 0.30 200 45 d3521w 1-1462036-8 4 3.00 9.0 0.40 200 80 d3529w 3-1462036-1 4.5 3.38 10.1 0.45 200 101 d3522w 2-1462036-0 5 3.75 11.2 0.50 200 125 d3523w 2-1462036-2 6 4.50 13.5 0.60 200 180 d3524w 2-1462036-4 9 6.75 20.3 0.90 200 405 d3525w 2-1462036-6 12 9.00 27.0 1.20 200 720 d3526w 2-1462036-8 24 18.00 47.5 2.40 240 2400 d3527w 9-1462036-1 48 36.00 95.0 4.80 240 9600 d3528w 9-1462036-5 smt short terminals, non-latching 3 2.25 6.8 0.30 200 45 d3521n 1-1462036-7 4 3.00 9.0 0.40 200 80 d3529n 3-1462036-0 4.5 3.38 10.1 0.45 200 101 d3522n 1-1462036-9 5 3.75 11.2 0.50 200 125 d3523n 2-1462036-1 6 4.50 13.5 0.60 200 180 d3524n 2-1462036-3 9 6.75 20.3 0.90 200 405 d3525n 2-1462036-5 12 9.00 27.0 1.20 200 720 d3526n 2-1462036-7 24 18.00 47.5 2.40 240 2400 d3527n 2-1462036-9 48 36.00 95.0 4.80 240 9600 d3528n 9-1462036-3 further coil versions are available on request. 108-98004 rev. g all specifcations subject to change. consult tyco electronics for latest specifcations. 7 of 14 telecom-, signal and rf relays ft2/fu2 relay axicom coil data (values at 23 c) ordering information nominal voltage unom operate/set voltage range release/ reset voltage minimum coil power coil resistance relay code tyco part number minimum voltage umin maximum voltage umax vdc vdc vdc vdc mw ? / 10 % high dielectric version tht non-latching, sensitive version 3 2.25 6.80 0.30 200 45 d3491l 2-1462035-7 5 3.75 11.20 0.50 200 125 d3493l 2-1462035-8 12 9.00 27.00 1.20 200 720 d3496 2-1462035-4 24 18.00 47.50 2.40 240 2400 d3497 2-1462035-5 smt short terminals, non-latching, sensitive version 3 2.25 6.80 0.30 200 45 d3591n 7-1462035-7 5 3.75 11.20 0.50 200 125 d3593n 7-1462035-8 12 9.00 27.00 1.20 200 720 d3596n 7-1462035-9 smt long terminals, non-latching, sensitive version 3 2.25 6.80 0.30 200 45 d3591w 9-1462036-7 5 3.75 11.20 0.50 200 125 d3593w 9-1462036-8 12 9.00 27.00 1.20 200 720 d3596w 9-1462036-9 high dielectric version - iec 60950 (australia) smt short terminals, non-latching, standard version 3 2.25 5.50 0.30 300 30 d3571n 7-1462035-5 5 3.75 9.20 0.50 300 83 d3573n 7-1462035-6 12 9.00 22.10 1.20 300 480 d3576n 7-1462035-3 smt long terminals, non-latching, standard version 3 2.25 5.50 0.30 300 30 d3571w 7-1462035-1 5 3.75 9.20 0.50 300 83 d3573w 7-1462035-2 12 9.00 22.10 1.20 300 480 d3576w 7-1462035-4 further coil versions are available on request. 108-98004 rev. g all specifcations subject to change. consult tyco electronics for latest specifcations. 8 of 14 telecom-, signal and rf relays ft2/fu2 relay axicom nominal voltage unom operate/set voltage range release/ reset voltage minimum coil power coil resistance relay code tyco part number minimum voltage umin maximum voltage umax vdc vdc vdc vdc mw ? / 10 % standard version tht non-latching 3 2.25 5.5 0.30 300 30 d3401 1462035-1 4.5 3.38 8.3 0.45 300 68 d3402 1462035-2 5 3.75 9.2 0.50 300 83 d3403 1462035-3 6 4.50 11.0 0.60 300 120 d3404 1462035-4 9 6.75 16.6 0.90 300 270 d3405 1462035-5 12 9.00 22.1 1.20 300 480 d3406 1462035-6 24 18.00 44.2 2.40 300 1920 d3407 1462035-7 48 36.00 88.3 4.80 300 7680 d3408 1462035-8 smt long terminals non-latching 3 2.25 5.5 0.30 300 30 d3401w 1462036-2 4.5 3.38 8.3 0.45 300 68 d3402w 1462036-4 5 3.75 9.2 0.50 300 83 d3403w 1462036-6 6 4.50 11.0 0.60 300 120 d3404w 1462036-8 9 6.75 16.6 0.90 300 270 d3405w 1-1462036-0 12 9.00 22.1 1.20 300 480 d3406w 1-1462036-2 24 18.00 44.2 2.40 300 1920 d3407w 1-1462036-4 48 36.00 88.3 4.80 300 7680 d3408w 1-1462036-6 smt short terminals non-latching 3 2.25 5.5 0.30 300 30 d3401n 1462036-1 4.5 3.38 8.3 0.45 300 68 d3402n 1462036-3 5 3.75 9.2 0.50 300 83 d3403n 1462036-5 6 4.50 11.0 0.60 300 120 d3404n 1462036-7 9 6.75 16.6 0.90 300 270 d3405n 1462036-9 12 9.00 22.1 1.20 300 480 d3406n 1-1462036-1 24 18.00 44.2 2.40 300 1920 d3407n 1-1462036-3 48 36.00 88.3 4.80 300 7680 d3408n 1-1462036-5 further coil versions are available on request. coil data (values at 23 c) ordering information 108-98004 rev. g all specifcations subject to change. consult tyco electronics for latest specifcations. 9 of 14 telecom-, signal and rf relays ft2/fu2 relay axicom contact data standard version / sensitive version / high dielectric version number of contacts and type 2 changeover contacts contact assembly bifurcated contacts contact material palladium-ruthenium, gold covered limiting continuous current at max. ambient temperature 2 a maximum switching current 2 a maximum swichting voltage 220 vdc 250 vac maximum switching capacity 60 w, 62.5 va thermoelectric potential < 10 v minimum switching voltage 100 v initial contact resistance / measuring condition: 10 ma / 20 mv < 50 m? electrical endurance at contact application 0 ( 30 mv / 10 ma) at cable load open end resistive load at 125 vdc / 0.24 a - 30 w at 250 vac / 0.25 a - 62.5 va at 24 v / 1.25 a - 30 w min. 2.5 x 10 6 operations min. 2.0 x 10 6 operations min. 1.0 x 10 5 operations min. 1.0 x 10 5 operations min. 1.0 x 10 5 operations mechanical endurance typ. 10 8 operations ul contact ratings 220 vdc / 0.24 a - 60 w 125 vdc / 0.24 a - 30 w 250 vac / 0.25 a - 62.5 va 125 vac / 0.5 a - 62.5 va 30 vdc / 2 a - 60 w max. dc load breaking capacity dc voltage [vdc] dc current [a] resistive load 108-98004 rev. g all specifcations subject to change. consult tyco electronics for latest specifcations. 10 of 14 telecom-, signal and rf relays ft2/fu2 relay axicom insulation standard version high dielectric version insulation resistance at 500 vdc > 10 9 ? > 10 9 ? dielectric test voltage (1 min) between coil and contacts between adjacent contact sets between open contacts 1500 vrms 1500 vrms 1000 vrms 4000 vrms 1800 vrms 1500 vrms surge voltage resistance according iec (10 / 700 s) between coil and contacts between adjacent contact sets between open contacts according to fcc 68 (10 / 160 s) between coil and contacts between adjacent contact sets between open contacts 2500 v 1500 v 1500 v 2500 v 1500 v 1500 v 6000 v 2500 v 2500 v 6000 v 2500 v 2500 v high frequency data capacitance between coil and contacts between adjacent contact sets between open contacts max. 4 pf max. 1 pf max. 1 pf rf characteristics isolation at 100 mhz / 900 mhz insertion loss at 100 mhz / 900 mhz v.s.w.r. at 100 mhz / 900 mhz - 30.6 db / - 13.7 db - 0.02 db / - 0.50 db 1.02 / 1.27 general data operate time at u nom typ. / max. 3 ms / 5 ms release time without diode in parallel (non-latching), typ. / max. 2 ms / 5 ms release time with diode in parallel (non-latching), typ. / max. 4 ms / 5 ms bounce time at closing contact, typ. / max. 1 ms / 5 ms maximum switching rate without load 50 operations/s ambient temperature -55 c ... +85 c thermal resistance < 125 k/w maximum permissible coil temperature 150 c vibration resistance (function) 10 g 10 to 500 hz shock resistance, half sinus, 11 ms 15 g (function) 500 g (damage) degree of protection / environmental protection immersion cleanable, ip 67 / rt iii / rt v needle flame test application time 20 s, no burning or glowing mounting position any processing information ultrasonic cleaning is not recommended weight (mass) max. 3 g terminal surface sncu 0.7 moisture sensitive level (jdec j-std-020b) - smd types msl 3 resistance to soldering heat 265 c / 10 s all data refers to 23 c unless otherwise specifed. 108-98004 rev. g all specifcations subject to change. consult tyco electronics for latest specifcations. 11 of 14 telecom-, signal and rf relays ft2/fu2 relay axicom vapor phase soldering: temperature/time profle (lead and housing peak temperature) 240 c 180 c 130 c 100 c external preheating full line: typical dotted line: process limits forced cooling time (s) temperature c resistance to soldering heat C reflow profile infrared soldering: temperature/time profle (lead and housing peak temperature) temperature c time (s) recommended soldering conditions soldering conditions according iec 60058-2-58 and ipc/jedec j-std-020b 20 - 40 sec infrared soldering: temperature/time profle (lead and housing peak temperature) temperature c time (s) recommended reflow soldering profile temperature c 108-98004 rev. g all specifcations subject to change. consult tyco electronics for latest specifcations. 12 of 14 telecom-, signal and rf relays ft2/fu2 relay axicom packing dimensions in mm tube for tht version 50 relays per tube 2000 relays per box tape and reel for smt version with long terminals 400 relays per reel 2000 relays per box 12 15.5 9 10.5 0.3 reel dimension tape and reel for smt version with short terminals 500 relays per reel 2500 relays per box 108-98004 rev. g all specifcations subject to change. consult tyco electronics for latest specifcations. 13 of 14 telecom-, signal and rf relays ft2/fu2 relay axicom im relays 4th generation slim line C low profle polarized 2 c/o telecom signal relay with bifurcated contacts, available as non latching or latching relay with 1 coil. nominal voltage range from 1.5 ... 24 v, coil power consumption of 50 ... 200 mw, latching relays with 1 coil 100 mw. the im relay is available as through hole and surface mount type (j-legs and gull wings) and capable to switch loads up to 60 w/62,5 va. it is currently the only 2 a rated 4g relay on the market. dielectric strength fulflls the telcordia requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the im relay is tested according cecc/iecq and certifed in accordance with iec/en 60950 and ul 60950. dimensions approx. 10 x 6 mm board space and 5.65 mm height. p2 relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. nominal voltage range from 3 ... 24 v, coil power consumption 140 mw, latching relays with 1 coil 70 mw. the p2 relay is available as through hole or surface mount type and capable to switch currents up to 5 a. dielectric strength fulflls the telcordia requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the p2 relay is tested according cecc/iecq and certifed in accordance with iec/en 60950 and ul 60950. dimensions approx. 15 x 7,5 mm board space and 10 mm height. fx2 relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. nominal voltage range from 3 ... 48 v, coil power consumption of 80 ... 260 mw for the high sensitive version, 140... 300 mw for the standard version, latching relays with 1 coil 100 mw. the fx2 relay is available as through hole type and capable to switch loads up to 60 w/62,5 va. dielectric strength fulflls the telcordia requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the fx2 relay is tested according cecc/ iecq and certifed in accordance with iec/en 60950 and ul 60950. dimensions approx. 15 x 7,5 mm board space and 10,7 mm height. ft2 / fu2 relays 3rd generation non polarized, non latching 2 c/o telecom relay with bifurca - ted contacts. nominal voltage range from 3 ... 48 v, coil power consumption 200 ... 300 mw. most sensitive 48 v relay. available as through hole and surface mount type. dielectric strength fulflls the telcordia requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the ft2/fu2 relay is tested according cecc/iecq and certifed in accordance with iec/en 60950 and ul 60950. dimensions approx. 15 x 7,5 mm board space and 10 mm height. fp2 relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. nominal voltage range from 3 ... 48 v, coil power consumption of 80 ... 260 mw for the high sensitive version, 140... 300 mw for the standard version, latching relays with 1 coil 100 mw.. the fp2 relay is available as through hole type and capable to switch loads up to 60 w/62,5 va. dielectric strength fulflls fcc part 68 (1,5 kv C 10 / 160 s). the fp2 is tested according cecc/iecq approved. dimensions approx. 14 x 9 mm board space and 5 mm height. mt2 2nd generation non polarized, non latching 2 c/o telecom and si - gnal relay with bifurcated contacts. nominal voltage range from 3 ... 48 v, coil power consumption 150/200/300/400 and 550 mw. dielectric strength fulfills the requirements according fcc part 68 (1,5 kv C 10 / 160 s). dimensions approx. 20 x 10 mm board space and 11 mm height. d2n relays 2nd generation non polarized 2 c/o relay for telecom and various other ap - plications. nominal voltage range from 3 ... 48 v, coil power consumption from 150 .... 500 mw. the d2n relay is capable to switch currents up to 3 a. dielectric strength fulflls the requirements according fcc part 68 (1,5 kv C 10 / 160 s). dimensions approx. 20 x10 mm board space and 11 mm height. p1 relays extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. nominal voltage range from 3 ... 24 v, coil power consumption 65 mw, latching relays with 1 coil 30 mw. the p1 relay is available as through hole or surface mount type and capable to switch currents up to 1 a. dielectric strength fulflls the requirements according fcc part 68 (1,5 kv C 10 / 160 s). dimensions approx. 13 x 7,6 mm board space and 7 mm height for tht or 8 mm height for smt version. w11 relays low cost, non polarized 1 c/o relay for various applications. nominal voltage range from 3 ... 24 v, coil power consumption 450 mw, sensitive versions 200 mw. the w11 relay is capable to switch currents up to 3 a. dielectric strength 1000 vrms. dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height. reed relays high sensitive, non polarized relay for telecom and various other applica - tions, available with 1 n/o, 2 n/o or 1c/o contacts. nominal voltage range from 5 ... 24 v, coil power consumption 50...280 mw for 1 n/o and 125 ... 280 mw for 2 n/o or 1 c/o versions. reedrelays are available in dip or sil housing and capable to switch currents up to 0,5 a. integrated diode and/or electrostatic shield optional. dielectric strength 1500 vdc. dimen - sions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for dip or 19,8 x 5 mm board space and 7,8 mm height for sil version. cradle relays extremely reliable and mature relay family of 1st generation for various signal switching applications. available as non polarized, polarized / latching and relay with ac coil. the beneft is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 vdc to 220 vac. cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 a. forcibly guided (linked) contact sets optional. dielectric strength 500 vrms. dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height. other relays we offer a variety of different relay families for maintenance and replace - ment purposes. these relays are up to 60 years old now, such as card relay sn (v23030 series), small general purpose relay (v23006 series), small polarized relay (v23063 ... v23067 and v23163 ... v23167 series). accessories like sockets, hold down springs, etc. optional. high frequency relays hf3 / hf3s / hf6 series rf relays offering excellent rf characteristics in a small package. all hf series relays are suitable for smd soldering processes. available as non latching or latching versions with 1 or 2 coils and a nominal coil voltage range from 3 24 v, a coil power consumption of 140 mw or 70 mw (single coil latching types). hf3: low cost rf relay suitable up to 3 ghz. impedance 50 and 75 ohm. 50 w hot switching and 50 w rf power carry capability. dimensions 14.6 x 7.3 x 10.3 mm. hf3s: high performance, high power rf relay suitable up to 3 ghz, 50 w hot switching and 150 w rf power carry capability. dimensions 15 x 7.6 x 10.6 mm. hf6: high performance, high power rf relay suitable up to 6 ghz, 50 w hot switching and 50 w rf power carry capability. dimensions 15 x 7.6 x 10.6 mm. telecom-, signal and rf relays axicom tyco electronics logistics ag werk axicom au seestrasse 295 ch-8804 au-w?denswil / switzerland phone +41 44 782 91 11 fax +41 44 782 90 00 e-mail: axicom@tycoelectronics.com tyco electronics paulsternstrasse 26 d-13629 berlin / germany phone +49 30 386 38573 fax +49 30 386 38575 e-mail: axicom@tycoelectronics.com tyco electronics ec trutnov s.r.o. komenskho 821 cz-541 01 trutnov / czech republic e-mail: axicom@tycoelectronics.com tyco electronics corporation pob 3608, harrisburg, pa 17105, usa phone +1 800-522-6752 |
Price & Availability of 1-1462035-4
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |