View 0-1462035-4_6724401.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ft2 / fu2 relay the best rela y tion 108-98004 rev. c ec-jm00-0009-03 ecoc: jm10 1. apr. 04
2 pole telecom/signal relay through hole type (tht) non C polarized. non-latching 1 coil features C telecom/signal relay (dry circuit, test access, ringing) C slim line 15 x 7.5 mm, 0.59 x 0.295 inch C switching current 2 a C 2 changeover contacts (2 form c / dpdt) C bifurcated contacts C high sensitive 24 v and 48 v coil versions C meets bellcore gr 1089, fcc part 68 and itu-t k20 3 2500 v between coil and contacts typical applications: C communications equipment linecard application C analog, isdn, xdsl pabx voice over ip C office and business equipment C measurement and control equipment C consumer electronics set top boxes, hifi C medical equipment options: high dielectric version (hdv) with > 5000 v surge voltage between coil and contacts suitable for 125 c ambient temperature ft2 / fu2 relay insulation cateogry: supplementary insulation according iec / en 60950 and ul 1950 working voltage 3 300 vrms mains supply voltage 3 250 vrms repetitive peak voltage: 1500 v pollution degree: internal: 1 external: 2 flammability classification: v-0 maximum operating temperature: 85 c iec 61811-54:01 (qc 160504) ul 508 ul 60950 file no. e111441 iec/en60950 iec ref. cert. no. 2168 page 2 (11) 108-98004 rev. c european directive conformance: ft2/fu2 relay product conformance according to: - directive 2000/53/ec: elv (end of life of vehicles) - directive 2002/95/ec: rohs (restrictions of the use of certain hazardous substances in electrical and electronic equipment) compliance is evidenced by written declaration from all raw material suppliers. tyco electronics axicom only has responsibility for the proper processing of these materials. confirmation is valid for date codes 0427
ft2 tht fu2 smt long terminals fu2 smt short terminals mm inch mm inch mm inch l 15 0.05 0.590 0.002 15 0.15 0.590 0.002 15 0.05 0.590 0.002 w 7.5 0.05 0.295 0.002 7.5 0.05 0.295 0.002 7.6 0.05 0.296 0.002 h 9.6 0.03 0.377 0.001 10 + 0.15 0.393 + 0.006 10 + 0.15 0.393 + 0.006 t 3.3 0.3 0.129 0.011 n/a n/a n/a n/a t1 n/a n/a 9.2 0.2 0.362 0.008 7.5 0.2 0.295 0.008 t2 5.08 0.200 5.08 0.200 5.08 0.200 tw 0.5 0.020 0.5 0.020 0.5 0.020 s 0.35 0.03 0.013 0.001 n/a n/a n/a n/a ft2 / fu2 relay dimensions ft2: tht version basic grid 2.54 mm long terminals (w) fu2: smt version short terminals (n) long terminals short terminals terminal assignment relay - top view non-latching 1 coil release condition mounting hole layout view onto the component side of the pcb solder pad layout view onto the component side of the pcb page 3 (11) 108-98004 rev. c
ft2 / fu2 relay 3 2.25 6.8 0.30 200 45 d3421 0-1462035-9 4 3.00 9.0 0.40 200 114 d3429 1-1462035-9 4.5 3.38 10.1 0.45 200 101 d3422 1-1462035-0 5 3.75 11.2 0.50 200 125 d3423 1-1462035-1 6 4.50 13.5 0.60 200 180 d3424 1-1462035-2 9 6.75 20.3 0.90 200 405 d3425 1-1462035-3 12 9.00 27.0 1.20 200 720 d3426 1-1462035-4 24 18.00 47.5 2.40 240 2400 d3427 1-1462035-7 48 36.00 95.0 4.80 240 9600 d3428 1-1462035-8 3 2.25 6.8 0.30 200 45 d3491 2-1462035-0 5 3.75 11.2 0.50 200 125 d3493 1-1462035-5 12 9.00 27.0 1.20 200 720 d3496 2-1462035-4 24 18.00 47.5 2.40 240 2400 d3497 2-1462035-5 coil data (values at 23c) nominal operate/set voltage range release/ coil coil relay tyco part voltage reset voltage power resistance code number u nom minimum minimum maximum voltage u min voltage u max vdc vdc vdc vdc mw ? / 10 % ordering information tht high dielectric version non-latching tht sensitive version non-latching 1 coil 3 2.25 6.8 0.30 200 45 d3521w 1-1462036-8 4 3.00 9.0 0.40 200 114 d3529w 3-1462036-1 4.5 3.38 10.1 0.45 200 101 d3522w 2-1462036-0 5 3.75 11.2 0.50 200 125 d3523w 2-1462036-2 6 4.50 13.5 0.60 200 180 d3524w 2-1462036-4 9 6.75 20.3 0.90 200 405 d3525w 2-1462036-6 12 9.00 27.0 1.20 200 720 d3526w 2-1462036-8 24 18.00 47.5 2.40 240 2400 d3527w 9-1462036-1 48 36.00 95.0 4.80 240 9600 d3528w 9-1462036-5 smt sensitive version long terminals non-latching 1 coil 3 2.25 6.8 0.30 200 45 d3521n 1-1462036-7 4 3.00 9.0 0.40 200 114 d3529n 3-1462036-0 4.5 3.38 10.1 0.45 200 101 d3522n 1-1462036-9 5 3.75 11.2 0.50 200 125 d3523n 2-1462036-1 6 4.50 13.5 0.60 200 180 d3524n 2-1462036-3 9 6.75 20.3 0.90 200 405 d3525n 2-1462036-5 12 9.00 27.0 1.20 200 720 d3526n 2-1462036-7 24 18.00 47.5 2.40 240 2400 d3527n 2-1462036-9 48 36.00 95.0 4.80 240 9600 d3528n 9-1462036-3 smt sensitive version short terminals non-latching 1 coil page 4 (11) 108-98004 rev. c 0 0 . 2 0 . 4 0 . 6 0 . 8 1 1 . 2 1 . 4 1 . 6 1 . 8 2 2 . 2 2 . 4 2 . 6 - 6 0 - 5 0 - 4 0 - 3 0 - 2 0 - 1 0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 1 0 0 1 1 0 1 2 0 1 3 0 1 4 0 2 0 0 m w c o i l 2 4 0 m w c o i l u nom = nominal coil voltage u max. = upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized u op. min. = lower limit of the operative range of the coil voltage (reliable operate voltage) u rel. min. = lower limit of the operative range of the coil voltage (reliable release voltage) coil operating range 200 / 240 mw u nom. nominal coil voltage u op. min. u rel. min. u max. at 0 a u max. at 2 x 2 a u max. at 2 x 1 a ambient temperature [c] coil voltage [u/u nom ]
further coil versions are available on request. 3 2.25 5.5 0.30 300 30 d3401 0-1462035-1 4.5 3.38 8.3 0.45 300 68 d3402 0-1462035-2 5 3.75 9.2 0.50 300 83 d3403 0-1462035-3 6 4.5 11.0 0.60 300 120 d3404 0-1462035-4 9 6.75 16.6 0.90 300 270 d3405 0-1462035-5 12 9.00 22.1 1.20 300 480 d3406 0-1462035-6 24 18.00 44.2 2.40 300 1920 d3407 0-1462035-7 48 36.00 88.3 4.80 300 7680 d3408 0-1462035-8 ft2 / fu2 relay tht standard version non-latching 3 2.25 5.5 0.30 300 30 d3501w 0-1462036-2 4.5 3.38 8.3 0.45 300 68 d3502w 0-1462036-4 5 3.75 9.2 0.50 300 83 d3503w 0-1462036-6 6 4.5 11.0 0.60 300 120 d3504w 0-1462036-8 9 6.75 16.6 0.90 300 270 d3505w 1-1462036-0 12 9.00 22.1 1.20 300 480 d3506w 1-1462036-2 24 18.00 44.2 2.40 300 1920 d3507w 1-1462036-4 48 36.00 88.3 4.80 300 7680 d3508w 1-1462036-6 smt standard version long terminals non-latching 3 2.25 5.5 0.30 300 30 d3501n 0-1462036-1 4.5 3.38 8.3 0.45 300 68 d3502n 0-1462036-3 5 3.75 9.2 0.50 300 83 d3503n 0-1462036-5 6 4.5 11.0 0.60 300 120 d3504n 0-1462036-7 9 6.75 16.6 0.90 300 270 d3505n 0-1462036-9 12 9.00 22.1 1.20 300 480 d3506n 1-1462036-1 24 18.00 44.2 2.40 300 1920 d3507n 1-1462036-3 48 36.00 88.3 4.80 300 7680 d3508n 1-1462036-5 smt standard version short terminals non-latching coil data (values at 23c) nominal operate/set voltage range release/ coil coil relay tyco part voltage reset voltage power resistance code number u nom minimum minimum maximum voltage u min voltage u max vdc vdc vdc vdc mw ? / 10 % ordering information page 5 (11) 108-98004 rev. c 0 . 0 0 . 2 0 . 4 0 . 6 0 . 8 1 . 0 1 . 2 1 . 4 1 . 6 1 . 8 2 . 0 2 . 2 2 . 4 2 . 6 - 6 0 - 5 0 - 4 0 - 3 0 - 2 0 - 1 0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 1 0 0 1 1 0 1 2 0 1 3 0 1 4 0 3 0 0 m w c o i l coil operating range 300 mw u nom = nominal coil voltage u max. = upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized u op. min. = lower limit of the operative range of the coil voltage (reliable operate voltage) u rel. min. = lower limit of the operative range of the coil voltage (reliable release voltage) u nom. nominal coil voltage u op. min. u rel. min. u max. at 0 a u max. at 2 x 2 a u max. at 2 x 1 a ambient temperature [c] coil voltage [u/u nom ]
ft2 / fu2 relay contact data number of contacts and type contact assembly contact material limiting continuous current at max. ambient temperature maximum switching current maximum swichting voltage maximum switching capacity thermoelectric potential minimum switching voltage initial contact resistance / measuring condition: 10 ma / 20 mv electrical endurance at contact application 0 ( 3 12 v / 3 10 ma) at cable load open end resistive load 125 vdc / 0.24 a - 30 w 250 vdc / 0.25 a - 62.5 va 24 vdc / 1.25 a - 30 w mechanical endurance ul contact ratings 2 changeover contacts bifurcated contacts silver nickel, gold-covered palladium-ruthenium, gold covered 2 a 2 a 2 a 2 a 220 vdc 220 vdc 250 vac 250 vdc 60 w, 62.5 va 60 w, 62.5 va < 10 m v 100 m v < 70 m w min. 2.5 x 10 6 operations min. 2.0 x 10 6 operations min. 1 x 10 5 operations min. 1 x 10 5 operations min. 1 x 10 5 operations typ. 10 8 operations 220 vdc / 0.24 a - 60 w 125 vdc / 0.24 a - 30 w 250 vac / 0.25 a - 62.5 va 125 vac / 0.5 a - 62.5 va 30 vdc / 2 a - 60 w standard version high dielectric version page 6 (11) 108-98004 rev. c dc voltage [vdc] dc current [a] max. dc load breaking capacity
general data operate time at u nom typ. / max. release time without diode in parallel, typ. / max. release time with diode in parallel, typ. / max. bounce time at closing contact, typ. / max. maximum switching rate without load ambient temperature thermal resistance maximum permissible coil temperature vibration resistance (function) shock resistance, half sinus, 11 ms degree of protection / environmental protection needle flame test mounting position processing information weight (mass) terminal surface moisture sensitive level (jdec j-std-020b) - smd types resistance 3 ms / 5 ms 2 ms / 5 ms 4 ms / 5 ms 1 ms / 5 ms 50 operations/s -55 c ... +85 c < 125 k/w 150 c 10 g 10 to 1000 hz 15 g (function) 500 g (damage) immersion cleanable, ip 67 / rt iii / rt v application time 20 s, no burning or glowing any ultrasonic cleaning is not recommended max. 3 g sncu 0,7 msl 3 260 c / 10 s ft2 / fu2 relay all data refers to 23 c unless otherwise specified. insulation insulation resistance at 500 vdc dielectric test voltage (1 min) between coil and contacts between adjacent contact sets between open contacts surge voltage resistance according to bellcore tr-nwt-001089 (2 / 10 m s) between coil and contacts between adjacent contact sets between open contacts according to fcc 68 (10 / 160 m s) between coil and contacts between adjacent contact sets between open contacts > 10 9 w > 10 9 w 1500 vrms 3500 vrms 1500 vrms 1800 vrms 1000 vrms 1500 vrms 2500 v 5000 v 1500 v 2500 v 1500 v 2500 v 2500 v 5000 v 1500 v 2500 v 1500 v 2500 v capacitance between coil and contacts between adjacent contact sets between open contacts rf characteristics isolation at 100 mhz / 900 mhz insertion loss at 100 mhz / 900 mhz v.s.w.r. at 100 mhz / 900 mhz max. 4 pf max. 1 pf max. 1 pf - 30.6 db / - 13.7 db - 0.02 db / - 0.50 db 1.02 / 1.27 high frequency data standard version high dielectric version page 7 (11) 108-98004 rev. c
ecr0915-2 1,5 0,1 2 0,1 4 0,1 16 0,1 a a b b 11,5 0,1 1,75 0,1 24 0,3 0,4 10,5 0,1 15,5 0,2 3 max. 10 0,2 3 max. section a-a section b- b 2,2 ft2 / fu 2 relay tube for tht version - 50 relays per stick, 1000 relays per box tape and reel for smt version with long terminals - 400 relays per reel, 2000 relays per box tape and reel for smt version with short terminals - 500 relays per reel, 2500 relays per box ecr0917-i 1,5 0,1 2 0,1 4 0,1 12 0,1 a a b b 11,5 0,1 1,75 0,1 24 0,3 0,4 10,5 0,2 15,5 0,2 3 max. 8 0,2 3 max. section a-a section b-b 1,5 0,1 reel dimension dimensions in mm packing page 8 (11) 108-98004 rev. c
page 9 (11) 108-98004 rev. c ft2/fu2 relay recommended soldering conditions soldering conditions according iec 60058-2-58 and ipc/jedec j-std-020b vapor phase soldering: temperature/time profile (lead and housing peak temperature) infrared soldering: temperature/time profile (lead and housing peak temperature) 240 c 180 c 130 c 100 c 20 - 40 sec full line: typical dotted line: process limits forced cooling time (s) temperature c temperature c time (s) resistance to soldering heat - reflow profile recommended reflow soldering profile infrared soldering: temperature/time profile (lead and housing peak temperature) temperature c time (s)
page 10 (11) 108-98004 rev. c ft2 / fu2 relay im relays 4 th generation slim line C low profile polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. nominal voltage range from 1.5... 24 v, coil power consumption of 140... 200 mw, latching relays with 1 coil 100 mw. the im relay is available as through hole and surface mount type (j-legs and gull wings) and capable to switch loads up to 60 w/62,5 va. dielectric strength fulfills the bellcore requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the im relay is cecc/iecq approved and certified in accordance with iec/en 60950 and ul1950. dimensions approx. 10 x 6 mm board space and 5.65 mm height. p2 relays 3 rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. nominal voltage range from 3 ... 24 v, coil power consumption 140 mw, latching relays with 1 coil 70 mw. the p2 relay is available as through hole or surface mount type and capable to switch currents up to 5 a. dielectric strength fulfills the bellcore requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). dimensions approx. 15 x 7,5 mm board space and 10 mm height. fx relays 3 rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. nominal voltage range from 3 ... 48 v, coil power consumption of 80 ... 260 mw for the high sensitive version, 140... 300 mw for the standard version, latching relays with 1 coil 100 mw. the fx2 relay is available as through hole type and capable to switch loads up to 60 w/62,5 va. dielectric strength fulfills the bellcore requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the fx2 is cecc/ iecq approved and certified in accordance with iec/en 60950 and ul1950. dimensions approx. 15 x 7,5 mm board space and 10,7 mm height. ft2 / fu2 relays 3 rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. nominal voltage range from 3 ... 48 v, coil power consumption 200 ... 300 mw. most sensitive 48 v relay. available as through hole and surface mount type. dielectric strength fulfills the bellcore requirements according gr 1089 (2,5 kv C 2 / 10 s) and fcc part 68 (1,5 kv C 10 / 160 s). the ft2/fu2 is cecc/iecq approved and certified in accordance with iec/en 60950 and ul1950. dimensions approx. 15 x 7,5 mm board space and 10 mm height. fp2 relays 3 rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. nominal voltage range from 3 ... 48 v, coil power consumption of 80 ... 260 mw for the high sensitive version, 140... 300 mw for the standard version, latching relays with 1 coil 100 mw.. the fp2 relay is available as through hole type and capable to switch loads up to 30 w/62,5 va. dielectric strength fulfills fcc part 68 (1,5 kv C 10 / 160 s). the fp2 is cecc/iecq approved. dimensions approx. 14 x 9 mm board space and 5 mm height. mt2 / mt4 2 nd generation non polarized, non latching 2 c/o and 4 c/o telecom and signal relay with bifurcated contacts. nominal voltage range from 4.5 ... 48 v, coil power consumption 150/200/300/400 and 550 mw, and 300 mw (mt4). dielectric strength fulfills the requirements according fcc part 68 (1,5 kv C 10 / 160 s) for both and the bellcore requirements according gr 1089 (2,5 kv C 2 / 10 s) the mt4 only. dimensions mt2 approx. 20 x 10 mm board space and 11 mm height, mt4 approx. 20 x15 mm board space and 11 mm height. d2n relays 2 nd generation non polarized 2 c/o relay for telecom and various other applications. nominal voltage range from 3 ... 48 v, coil power consumption from 150 .... 500 mw. the d2n relay is capable to switch currents up to 3 a. dielectric strength fulfills the requirements according fcc part 68 (1,5 kv C 10 / 160 s). dimensions approx. 20 x10 mm board space and 11,5 mm height. p1 relays extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. nominal voltage range from 3 ... 24 v, coil power consumption 65 mw, latching relays with 1 coil 30 mw. the p1 relay is available as through hole or surface mount type and capable to switch currents up to 1 a. dielectric strength fulfills the requirements according fcc part 68 (1,5 kv C 10 / 160 s). dimensions approx. 13 x 7,6 mm board space and 7 mm height for tht or 8 mm height for smt version. w11 relays low cost, non polarized 1 c/o relay for various applications. nominal voltage range from 3 ... 24 v, coil power consumption 450 mw, sensitive versions 200 mw. the w11 relay is capable to switch currents up to 3 a. dielectric strength 1000 vrms. dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height. reed relays high sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. nominal voltage range from 5 ... 24 v, coil power consumption 50...280 mw for 1 n/o and 125 ... 280 mw for 2 n/o or 1 c/o versions. reedrelays are available in dip or sil housing and capable to switch currents up to 0,5 a. integrated diode and/or electrostatic shield optional. dielectric strength 1500 vdc. dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for dip or 19,8 x 5 mm board space and 7,8 mm height for sil version. cradle relays extremely reliable and mature relay family of 1 st generation for various signal switching applications. available as non polarized, polarized / latching and relay with ac coil. the benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 vdc to 220 vac. cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 a. forcibly guided (linked) contact sets optional. dielectric strength 500 vrms. dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height. other relays we offer a variety of different relay families for maintenance and replacement purposes. these relays are up to 60 years old now, such as card relay sn (v23030 / v23031 series), small general purpose relay (v23006 series), small polarized relay (v23063 ... v23067 and v23163 ... v23167 series). accessories like sockets, hold down springs, etc. optional. hf3 relay high performance low cost rf relay with excellent rf characteristics. available with an impedance of 50 and 75 ohm. suitable for frequen - cies up to 3 ghz. actually smallest rf relay available combining small size, excellent rf performance and smd solderability. available as non latching or latching relay with 1 or 2 coils and a nominal coil voltage range from 3 ... 24 v, coil power consumption 140 mw, latching relays with 1 coil 70 mw. dimensions 14.6 x 7.3 x 10 mm.
tyco electronics axicom ltd. seestrasse 295 - p.o. box 220 ch-8804 au-w?denswil / switzerland phone +41 1 782 9111 fax +41 1 782 9080 e-mail: axicom@tycoelectronics.com tyco electronics corporation pob 3608, harrisburg, pa 17105, usa phone +1 800-522-6752 tyco electronics ec trutnov s.r.o. komenskho 821 cz-541 01 trutnov / czech republic e-mail: axicom@tycoelectronics.com page 11 (11) 108-98004 rev. c tyco electronics paulsternstrasse 26 d-13629 berlin / germany phone +49 30 386 38573 fax +49 30 386 38575 e-mail: axicom@tycoelectronics.com

▲Up To Search▲

Price & Availability of 0-1462035-4

	To Download 0-1462035-4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .