a119 stacking height 5 to 11mm half pitch connector fx4 series 5 to 11mm dip type stacking height flexible the mounting area 70% reduced, compared with conventional product (fx2 series) fx2 series fx4 series (compared with 60 contacts) features the fx4 series is a miniature board to board connectors, where the stacking height can be set at the 1mm interval. applications computers, peripheral equipments, business equipments, etc. through hole type 1. small and light the mounting space and weight is reduced about 30%, compared to the conventional product (hrs fx2 series), respectively, and the mounting area about 70% reduced, compared to the conventional one. 2. stacking height 5 to 11mm the board to board stacking height can be set per 1mm from 5mm up to 11mm. 3. flux swell prevention when solder is dipped, the flux swell from the board rear side is completely prevented. 4. mis-insertion prevention and low insertion/extraction force mechanism the connection area is designed to completely prevent the mis-insertion. moreover, the low insertion/extraction mechanism is adopted. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a120 fx4 series stacking height 5 to 11mm half pitch connector product specifications rating current rating 0.5a operating temperature range -55 ? to +85 ? (note 1) storage temperature range -10 ? to +60 ? (note 2) voltage rating 125v ac operating humidity range 40 % to 80 % storage humidity range 40 % to 70 % item specification condition 1. insulation resistance 100m ohms min. measured at 250v pc 2. withstanding voltage no flashover or insulation breakdown. 300v ac for 1 minute 3. resistance 45m ohms max. 100ma 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) contact resistance: 55m ohms max. insulation resistance: 100m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle contact resistance : 55m ohms max. (-55 ? : 30 minutes 15 to 35 ? : 2 to 3 minutes insulation resistance : 100m ohms min. (- 85 ? : 30 minutes 15 to 35 ? : 2 to 3minutes) 5 cycles 7. durability (mating/un-mating) contact resistance : 55m ohms max. 300 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3. information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note : the black dots on the insulater will not affect performance. material part material finish remarks insulator polyamide beige ul94v-0 receptacle contact selective gold plated ________ header contact phosphor bronze selective gold plated ________ ordering information fx4c 1 - 80 p - 1.27 dsa l qw tyu er r connector type p : header s : receptacle t contact pitch : 1.27mm y contact type dsa : straight u l: board prefixed pin q series name : fx4c w product height variable:none: standard 1: +1mm 2: +2mm 3: +3mm e number of contacts: 20, 32, 40, 52, 60, 68, 80 dip type b application pattern and stacking height combination through hole type receptacle header fx4c - * s fx4c2- * s fx4c3- * s (catalog page a124) (catalog page a125) (catalog page a126) 578 689 81011 fx4c - * p (catalog page a121) fx4c1- * p (catalog page a122) fx4c3- * p (catalog page a123) unit: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a121 fx4 series stacking height 5 to 11mm half pitch connector header (through hole type)-stacking height: standard type b pcb mounting pattern part number cl no. number of contacts a bcd fx4c-20p-1.27dsa(71) 574-0001-0-71 _ _ _ _ _ _ _ _ fx4c-20p-1.27dsal(71) 574-0051-9-71 20 21.87 14.58 11.43 20.32 fx4c-32p-1.27dsa(71) 574-0002-3-71 _ _ _ _ _ _ _ _ fx4c-32p-1.27dsal(71) 574-0052-1-71 32 29.49 22.2 19.05 27.94 fx4c-40p-1.27dsa(71) 574-0003-6-71 _ _ _ _ _ _ _ _ fx4c-40p-1.27dsal(71) 574-0053-4-71 40 34.57 27.28 24.13 33.02 fx4c-52p-1.27dsa(71) 574-0004-9-71 _ _ _ _ _ _ _ _ fx4c-52p-1.27dsal(71) 574-0054-7-71 52 42.19 34.9 31.75 40.64 fx4c-60p-1.27dsa(71) 574-0005-1-71 _ _ _ _ _ _ _ _ fx4c-60p-1.27dsal(71) 574-0055-0-71 60 47.27 39.98 36.83 45.72 fx4c-68p-1.27dsa(71) 574-0006-4-71 _ _ _ _ _ _ _ _ fx4c-68p-1.27dsal(71) 574-0056-2-71 68 52.35 45.06 41.91 50.8 fx4c-80p-1.27dsa(71) 574-0007-7-71 _ _ _ _ _ _ _ _ fx4c-80p-1.27dsal(71) 574-0057-5-71 80 59.97 52.68 49.53 58.42 yes unit: mm rohs the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
yes rohs a122 fx4 series stacking height 5 to 11mm half pitch connector header (through hole type)-stacking height: standard+1mm type b pcb mounting pattern part number cl no. number of contacts a bcd fx4c1-20p-1.27dsa(71) 574-0011-4-71 _ _ _ _ _ _ _ _ fx4c1-20p-1.27dsal(71) 574-0061-2-71 20 21.87 14.58 11.43 20.32 fx4c1-32p-1.27dsa(71) 574-0012-7-71 _ _ _ _ _ _ _ _ fx4c1-32p-1.27dsal(71) 574-0062-5-71 32 29.49 22.2 19.05 27.94 fx4c1-40p-1.27dsa(71) 574-0013-0-71 _ _ _ _ _ _ _ _ fx4c1-40p-1.27dsal(71) 574-0063-8-71 40 34.57 27.28 24.13 33.02 fx4c1-52p-1.27dsa(71) 574-0014-2-71 _ _ _ _ _ _ _ _ fx4c1-52p-1.27dsal(71) 574-0064-0-71 52 42.19 34.9 31.75 40.64 fx4c1-60p-1.27dsa(71) 574-0015-5-71 _ _ _ _ _ _ _ _ fx4c1-60p-1.27dsal(71) 574-0065-3-71 60 47.27 39.98 36.83 45.72 fx4c1-68p-1.27dsa(71) 574-0016-8-71 _ _ _ _ _ _ _ _ fx4c1-68p-1.27dsal(71) 574-0066-6-71 68 52.35 45.06 41.91 50.8 fx4c1-80p-1.27dsa(71) 574-0017-0-71 _ _ _ _ _ _ _ _ fx4c1-80p-1.27dsal(71) 574-0067-9-71 80 59.97 52.68 49.53 58.42 unit: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
yes rohs a123 fx4 series stacking height 5 to 11mm half pitch connector header (through hole type)-stacking height: standard+3mm type b pcb mounting pattern part number cl no. number of contacts a bcd fx4c3-20p-1.27dsa(71) 574-0031-1-71 _ _ _ _ _ _ _ _ fx4c3-20p-1.27dsal(71) 574-0081-0-71 20 21.87 14.58 11.43 20.32 fx4c3-32p-1.27dsa(71) 574-0032-4-71 _ _ _ _ _ _ _ _ fx4c3-32p-1.27dsal(71) 574-0082-2-71 32 29.49 22.2 19.05 27.94 fx4c3-40p-1.27dsa(71) 574-0033-7-71 _ _ _ _ _ _ _ _ fx4c3-40p-1.27dsal(71) 574-0083-5-71 40 34.57 27.28 24.13 33.02 fx4c3-52p-1.27dsa(71) 574-0034-0-71 _ _ _ _ _ _ _ _ fx4c3-52p-1.27dsal(71) 574-0084-8-71 52 42.19 34.9 31.75 40.64 fx4c3-60p-1.27dsa(71) 574-0035-2-71 _ _ _ _ _ _ _ _ fx4c3-60p-1.27dsal(71) 574-0085-0-71 60 47.27 39.98 36.83 45.72 fx4c3-68p-1.27dsa(71) 574-0036-5-71 _ _ _ _ _ _ _ _ fx4c3-68p-1.27dsal(71) 574-0086-3-71 68 52.35 45.06 41.91 50.8 fx4c3-80p-1.27dsa(71) 574-0037-8-71 _ _ _ _ _ _ _ _ fx4c3-80p-1.27dsal(71) 574-0087-6-71 80 59.97 52.68 49.53 58.42 unit: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
yes rohs a124 fx4 series stacking height 5 to 11mm half pitch connector receptacle (through hole type)-stacking height: standard type b pcb mounting pattern part number cl no. number of contacts a bcd fx4c-20s-1.27dsa(71) 574-0101-5-71 _ _ _ _ _ _ _ _ fx4c-20s-1.27dsal(71) 574-0151-3-71 20 21.87 11.43 18.48 20.32 fx4c-32s-1.27dsa(71) 574-0102-8-71 _ _ _ _ _ _ _ _ fx4c-32s-1.27dsal(71) 574-0152-6-71 32 29.49 19.05 26.1 27.94 fx4c-40s-1.27dsa(71) 574-0103-0-71 _ _ _ _ _ _ _ _ fx4c-40s-1.27dsal(71) 574-0153-9-71 40 34.57 24.13 31.18 33.02 fx4c-52s-1.27dsa(71) 574-0104-3-71 _ _ _ _ _ _ _ _ fx4c-52s-1.27dsal(71) 574-0154-1-71 52 42.19 31.75 38.8 40.64 fx4c-60s-1.27dsa(71) 574-0105-6-71 _ _ _ _ _ _ _ _ fx4c-60s-1.27dsal(71) 574-0155-4-71 60 47.27 36.83 43.88 45.72 fx4c-68s-1.27dsa(71) 574-0106-9-71 _ _ _ _ _ _ _ _ fx4c-68s-1.27dsal(71) 574-0156-7-71 68 52.35 41.91 48.96 50.8 fx4c-80s-1.27dsa(71) 574-0107-1-71 _ _ _ _ _ _ _ _ fx4c-80s-1.27dsal(71) 574-0157-0-71 80 59.97 49.53 56.58 58.42 unit: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
yes rohs a125 fx4 series stacking height 5 to 11mm half pitch connector receptacle (through hole type)-stacking height: standard+2mm type b pcb mounting pattern part number cl no. number of contacts a bcd fx4c2-20s-1.27dsa(71) 574-0121-2-71 _ _ _ _ _ _ _ _ fx4c2-20s-1.27dsal(71) 574-0171-0-71 20 21.87 11.43 18.48 20.32 fx4c2-32s-1.27dsa(71) 574-0122-5-71 _ _ _ _ _ _ _ _ fx4c2-32s-1.27dsal(71) 574-0172-3-71 32 29.49 19.05 26.1 27.94 fx4c2-40s-1.27dsa(71) 574-0123-8-71 _ _ _ _ _ _ _ _ fx4c2-40s-1.27dsal(71) 574-0173-6-71 40 34.57 24.13 31.18 33.02 fx4c2-52s-1.27dsa(71) 574-0124-0-71 _ _ _ _ _ _ _ _ fx4c2-52s-1.27dsal(71) 574-0174-9-71 52 42.19 31.75 38.8 40.64 fx4c2-60s-1.27dsa(71) 574-0125-3-71 _ _ _ _ _ _ _ _ fx4c2-60s-1.27dsal(71) 574-0175-1-71 60 47.27 36.83 43.88 45.72 fx4c2-68s-1.27dsa(71) 574-0126-6-71 _ _ _ _ _ _ _ _ fx4c2-68s-1.27dsal(71) 574-0176-4-71 68 52.35 41.91 48.96 50.8 fx4c2-80s-1.27dsa(71) 574-0127-9-71 _ _ _ _ _ _ _ _ fx4c2-80s-1.27dsal(71) 574-0177-7-71 80 59.97 49.53 56.58 58.42 unit: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
yes rohs a126 fx4 series stacking height 5 to 11mm half pitch connector receptacle (through hole type)-stacking height: standard+3mm type b pcb mounting pattern part number cl no. number of contacts a bcd fx4c3-20s-1.27dsa(71) 574-0131-6-71 _ _ _ _ _ _ _ _ fx4c3-20s-1.27dsal(71) 574-0181-4-71 20 21.87 11.43 18.48 20.32 fx4c3-32s-1.27dsa(71) 574-0132-9-71 _ _ _ _ _ _ _ _ fx4c3-32s-1.27dsal(71) 574-0182-7-71 32 29.49 19.05 26.1 27.94 fx4c3-40s-1.27dsa(71) 574-0133-1-71 _ _ _ _ _ _ _ _ fx4c3-40s-1.27dsal(71) 574-0183-0-71 40 34.57 24.13 31.18 33.02 fx4c3-52s-1.27dsa(71) 574-0134-4-71 _ _ _ _ _ _ _ _ fx4c3-52s-1.27dsal(71) 574-0184-2-71 52 42.19 31.75 38.8 40.64 fx4c3-60s-1.27dsa(71) 574-0135-7-71 _ _ _ _ _ _ _ _ fx4c3-60s-1.27dsal(71) 574-0185-5-71 60 47.27 36.83 43.88 45.72 fx4c3-68s-1.27dsa(71) 574-0136-0-71 _ _ _ _ _ _ _ _ fx4c3-68s-1.27dsal(71) 574-0186-8-71 68 52.35 41.91 48.96 50.8 fx4c3-80s-1.27dsa(71) 574-0137-2-71 _ _ _ _ _ _ _ _ fx4c3-80s-1.27dsal(71) 574-0187-0-71 80 59.97 49.53 56.58 58.42 unit: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a127 fx4 series stacking height 5 to 11mm half pitch connector b connector precautions 1. tolerance clearance on mating side 2. prefixed process to board (through hole type) the effective connecting length of the product is set to 1.5mm. please use the product to specify the clearance between the header and the receptacle in the connection process within 1mm. if the prefixed work is required for mounting on the board, please use the prefixed pin type. (applicable board thickness t = 1.6 0.1) cautions: when the connector is installed in the board, the dip post is guided into the board through-hole in order to prevent the dip post breakage, and then insert the board in parallel to the connector so as to push in the prefixed pin. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
