ds-208 rev a01 saronix oven controlled crystal oscillator technical data saronix ocxo series hcmos www.pericom.com/saronix frequency range: actual size description an oven controlled crystal oscillator (ocxo) with hcmos output. the de- vice is packaged in standard 14-pin dip compatible all metal, resistance welded package. to 20 mhz (consult saronix for frequencies over 20 mhz) frequency stability, over: operating temp range: see part numbering guide aging: 1 year: < 0.7ppm, 10 years: < 4 ppm supply voltage (0.5v): < 0.1ppm load (min to max): < 0.01ppm applications & features frequency stability of 0.1 ppm typ over temperature range small dimensions very fast warm up low power consumption standard frequencies: 10.0000 mhz 10.2400 mhz 12.2880 mhz 12.8800 mhz 13.0000 mhz 16.0000 mhz 16.3840 mhz 19.4400 mhz 20.0000 mhz temperature range: operating: storage: 0 to +60, -20 to +70c, -40 to +85c -65 to +125c supply voltage: recommended operating: 5 v 0.2v supply current: 90ma max output characteristics: symmetry: rise & fall times: logic 0: logic 1: output load: 40/60% @ 50% vdd 7ns max 0.4 v max 4.5v min 10 ls ocxovt - xx - 20.0000 model frequency (mhz) see standard frequencies in applications & features section ar1: 0 to +60c, 0.075ppm (0.15ppm pk-to-pk), resistor adjustment av5: 0 to +60c, 0.075ppm (0.15ppm pk-to-pk), voltage adjustment br1: -20 to +70c, 0.15ppm (0.3ppm pk-to-pk), resistor adjustment bv5: -20 to +70c, 0.15ppm (0.3ppm pk-to-pk), voltage adjustment cr1: -40 to +85c, 0.3ppm (0.6ppm pk-to-pk), resistor adjustment cv5: -40 to +85c, 0.3ppm (0.6ppm pk-to-pk), voltage adjustment part numbering guide within spec after 30s @ 0c 200 ma max during 10s warm-up: ? f/f: current: 3000g, 0.3ms, 1/2 sine mil-std-883, method 2003 mil-std-202, method 211, conditions a and c 10 to 2000hz / 10g mil-std-202, method 215 mil-std-202, method 210, condition b mechanical: shock: solderability: terminal strength: vibration: solvent resistance: resistance to soldering heat: environmental: mil-std-883, method 1014, condition c mil-std-883, method 1014, condition a2 mil-std-883, method 1011, condition a mil-std-883, method 1004 gross leak test: fine leak test: thermal shock: moisture resistance: frequency control range: control voltage: frequency deviation: response slope: see table 1, next page 4ppm min positive 1hz: < -60dbc/hz 10hz: < -90dbc/hz 100hz: < -120dbc/hz 1khz: < -130dbc/hz phase noise (bw = 1hz):
all specifications are subject to change without notice. ds-208 rev a01 saronix ocxo series saronix oven controlled crystal oscillator technical data hcmos www.pericom.com/saronix package details scale: none (dimensions in max) mm inches 5.5 0.22 (4) glass insulators radius: 2.0 0.08 7.6 0.30 pin 14 pin 1 10.8 0.42 pin 7 5.4 .252 15.2 0.6 0.5 0.02 0.86 .034 20.3 0.80 7.6 0.3 saronix ocxo denotes pin 1 date code frequency part number pin 1: frequency adjustment pin 8: o utput pin 7: gnd pin 14: vcc pin function: marking format pin 8 13.2 0.52 1.0 0.04 table 1, control voltage ar1 br1 cr1 0 to 10 k ? -4.7 k ? min model: resistor adjustment: input impedance: adjustment with resistor av5 bv5 cv5 0.5 to 5v 47 k ? min model: voltage adjustment: input impedance: adjustment with voltage
|
