cmp350 series quad output [ 2 year warranty ] ? 10 x 5 inch footprint with 1.75 inch low profile ? en61000-3-2 compliant ? current sharing ? individually protected outputs ? power fail signals ? 350w with 300lfm ? en55022, en55011 conducted emissions level b ? ul, vde and csa safety approvals the cmp350 series is a 350w universal input ac/dc power supply in a 10 x 5 x 1.75 inch package. the series has the lowest standard 350w profile in the industry, input harmonic current emission correction as standard, current sharing and has 3.3v models to support the industry's transition from 5v to lower operating voltages. the cmp350 provides 350w of output power with 300lfm of forced air. standard features include isolated outputs with individual overvoltage and overload protection on each output. the series has an enclosure with end- mounted fans option that does not change the overall height. the series, with full international safety approval and the ce mark, meets conducted emissions en55022 level b and has immunity compliance to en61000-4-2,-3,-4, -5, -6. the cmp350 series is designed for use in medium power data networking, computer and telecom applications such as hubs, routers, file servers, graphic workstations and mass storage peripherals. it is also suitable for industrial, test and office applications. specification all specifications are typical at nominal input, full load at 25 c unless otherwise stated page 72 emc characteristics conducted emissions en55022, fcc part 15 level b radiated emissions en55022, fcc part 15 level a harmonic current en61000-3-2 compliant emission correction esd air en61000-4-2 level 3 esd contact en61000-4-2 level 3 surge en61000-4-5 level 3 fast transients en61000-4-4 level 3 radiated immunity en61000-4-3 level 3 conducted immunity en61000-4-6 level 3 general specifications hold-up time 110vac, 60hz, 350w 16ms efficiency 75% typical isolation voltage input/output 3000vac input/chassis 1500vac output/output 50vdc switching frequency 150khz approvals and en60950, vde0805, ul1950, standards csa c22.2 no. 950 weight 2.0kg (4.4ibs) size open frame 10.0 x 5 x 1.75 inches (see note c) enclosed 10.5 x 5 x 1.75 inches mtbf mil-hdbk-217f 212,707 hours bellcore tr-nwt-332 959,870 hours environmental specifications thermal performance operating ambient, fl 0c to +50c cooling 300lfm airflow required +50c to +70c, derate to 50% load ambient on all channels non-operating -40c to +85c relative humidity non-condensing 5% to 95% rh altitude operating 10,000 feet max. non-operating 30,000 feet max. vibration, see note 15 5hz to 500hz 2.4g rms peak output specifications output accuracy 1.0% total regulation main and auxiliary v1 output 1.0% (line and load) auxiliary output (v2) 6.0% auxiliary output (v3) 5.0% transient response main output 2.0% max. dev., 25% step load 500s recovery change at 1a/s temperature coefficient 0.02%/c ripple and noise 0hz to 20mhz 50mv pk-pk see note 3 or 1.0% overvoltage protection latching see table short circuit protection all channels indefinite, auto recovery overload protection all channels yes thermal protection auto shutdown, auto recovery current sharing main output and 10% of rating aux. 1 (5v and 3v3) input specifications input voltage range universal 90 to 264vac (30s brown-out at 85vac) input frequency range 47hz to 63hz input surge voltage 300vac 20ms inrush current 264vac, cold start 75a max. safety ground 0.72ma leakage current input current 110vac, 350w 4.2arms max. input fuse ul, iec approved 6.3a 250v power factor 110/220vac full load 0.97 min.
output output output current ripple (3) total ovp adjust model voltage type min (1) max (2) regulation threshold range numbers (a) 5v main 0a 50a 50mv 1.0% 5.75 to 6.75v +10, -5% cmp350-9604 (8) 3.3v (2) aux 1 1.0a 20a (8) 50mv 1.0% 4.15 to 4.35v +20, -5% 12v (2) aux 2 1.0a 10a (8) 120mv 1.0% 13.2 to 14.5v 5% 12v (2) aux 3 0.5a 5.0a (8) 120mv 5.0% 12.6 to 15.2v (4) (6) 5v main 0a 50a 50mv 1.0% 5.75 to 6.75v +10, -5% cmp350-9601 12v (2) aux 1 1.0a 10a 120mv 1.0% 13.2 to 14.5v 5% 12v (2) aux 2 0.5a 5.0a 120mv 5.0% 12.6 to 15.2v (4) (5) 5v (2) aux 3 0.5a 5.0a 50mv 1.0% 5.75 to 6.75v (7) 5v main 0a 50a 50mv 1.0% 5.75 to 6.75v +10, -5% cmp350-9602 12v (2) aux 1 1.0a 10a 120mv 1.0% 13.2 to 14.5v 5% 12v (2) aux 2 0.5a 5.0a 120mv 5.0% 12.6 to 15.2v (4) (5) 24v (2) aux 3 0.2a 2.0a 240mv 1.0% 26.4 to 28.8v (7) 5v main 0a 50a 50mv 1.0% 5.75 to 6.75v +10, -5% cmp350-9606 15v (2) aux 1 0.8a 8.0a 150mv 1.0% 16.5 to 18.0v 5% 15v (2) aux 2 0.4a 4.0a 150mv 5.0% 15.7 to 19.0v (4) (5) 24v (2) aux 3 0.2a 2.0a 240mv 1.0% 26.4 to 28.8v (7) 5v main 0a 50a 50mv 1.0% 5.75 to 6.75v +10, -5% cmp350-9603 12v (2) aux 1 1.0a 10a 120mv 1.0% 13.2 to 14.5v 5% 12v (2) aux 2 0.5a 5.0a 120mv 5.0% 12.6 to 15.2v (4) (5) 12v (2) aux 3 0.3a 3.0a 120mv 1.0% 13.2 to 14.5v (7) 3.3v main 0a 50a 50mv 1.0% 4.15 to 4.35v +20, -5% cmp350-9692 (9) 5v (2) aux 1 1.0a 15a (9) 50mv 1.0% 5.75 to 6.75v +10, -5% 12v (2) aux 2 0.5a 5.0a (9) 120mv 1.0% 13.2 to 14.5v 5% 12v (2) aux 3 0.5a 5.0a (9) 120mv 5.0% 12.6 to 15.2v (4) (6) 24v main 0a 10a 240mv 1.0% 26.4 to 28.8v 5% cmp350-9623 5v aux 1 1.0a 15a 50mv 1.0% 5.75 to 6.75v +10, -5% 12v aux 2 1.0a 10a 120mv 1.0% 13.2 to 14.5v 5% 12v aux 3 5.0a 5.0a 120mv 5.0% 12.6 to 15.2v (4) (6) international safety standard approvals vde0805/en60950/iec950 licence no. 96709 ul1950 file no. e136005 csa c22.2 no. 950 file no. lr41062c 20w minimum load required to maintain regulation 350w 0w 20w 175w 0 c 10 c 20 c 30 c 40 c 50 c 60 c 70 c derating curve, see notes 10 & 11 output power (watts) 300lfm forced air cooling 350 watt ac/dc high wattage power supplies with pfc medium to high power ac/dc power supplies | 350w ac/dc page 73 http://www.artesyn.com 2
pin assignment (tb1) input connector tb1 is a standard screw type terminal block. an iec type connector is provided on enclosed models (suffix cf). main output connector main output busbar connector vmain+ and vmain-. auxiliary output pin assignment (tb2) tb2 auxiliary output connector is used on models -9601, -9602, -9603, -9606. pin connections (tb2) pin no. reference function tb2-1 aux ch. 1 positive tb2-2 aux ch. 1 positive tb2-3 aux ch. 1 negative tb2-4 aux ch. 1 negative tb2-5 aux ch. 2 positive tb2-6 aux ch. 2 negative tb2-7 aux ch. 3 positive tb2-8 aux ch. 3 negative notes: there are three external accessible connectors in the unit besides the main busbar. the first one is designated as tb1 which is the input power connector. auxiliary output pin assignment (tb2 and tb3) tb2 and tb3 auxiliary output connectors are used on models -9604 and -9692. see page 72 for detail. 1 8 tb1 j1 tb2 vmain + vmain - top view 1 3 user interface pin (j1) (b) pin no. reference function j1-3 12ch1 12v bias refd. to main ch. -ve j1-4 12ch2 12v bias refd. to aux. ch. #1 -ve, (-9601, -9602, -9603, -9606) 12v bias refd. to aux. ch. #2 -ve, (-9604, -9692) j1-5 vsenmain+ main ch. positive remote sense j1-6 * aux1set see note 14 j1-7 gnd2 ground refd. to aux. ch. #1 -ve, (-9601, -9602, -9603, -9606) ground refd. to aux. ch. #2 -ve, (-9604, -9692) j1-8 pok (13) power good detect signal j1-9 gnd1 ground refd. to main ch. -ve j1-10 pfd (13) power fail detect signal j1-12 vsenmain- main ch. negative remote sense j1a-1 * vauxsen- auxiliary channel negative remote sense j1a-2 * vauxsen+ auxiliary channel positive remote sense j1a-3 * gnd3 ground refd. to aux. ch. 1 +ve for -9604 and -9692 models j1a-6 * csaux (12) auxiliary channel current share pin j1a-7 * trimaux2 tim pin for 5v or 3.3v auxiliary channel j1a-8 csmain (12) main channel current share pin j1a-9 inhibit- inhibit signal return j1a-10 inhibit+ inhibit signal j1a-11 trimaux trim pin for 12v or 15v auxiliary channel j1a-12 trimain main channel trim pin pin connections output busbar connector pin no. function vmain+ positive vmain- negative pin connections input connector tb1 pin no. function tb1-1 live tb1-2 ground tb1-3 neutral pin connections (tb2 and tb3) pin no. reference function tb2-1 aux ch. 2 positive tb2-2 aux ch. 2 positive tb2-3 aux ch. 2 negative tb2-4 aux ch. 2 negative tb2-5 aux ch. 3 positive tb2-6 aux ch. 3 negative tb3-1 aux ch. 1 positive tb3-2 aux ch. 1 negative page 73 350 watt ac/dc high wattage power supplies with pfc 350w ac/dc | medium to high power ac/dc power supplies * applies to -9604, -9692 models only.
notes 1 the unit must be powered up into the recommended minimum loads to ensure the outputs come up. 2 combined maximum output power for aux. 1, 2 and 3 is 220w. 3 for models -9604 and -9692, on the aux 1 channel, output ripple and noise is measured 6 inches down the output cables through a 1 foot long twisted pair terminated with a parallel combination of a 10f electrolytic and a 0.1f ceramic capacitors. for all other channels on all models, ripple and noise is measured directly at the output terminals. 4 no shutdown or latch-up occurs; voltage is internally limited to specified range. 5 aux. 2 tracks aux. 3, aux. 4 not adjustable. 6 aux. 3 tracks aux. 2. 7 output is not adjustable. 8 cmp350-9604 rated operation: the auxiliary channels must share power as indicated by graph 1. the maximum output power is 220w. 9 cmp350-9692 rated operation: the auxiliary channels must share power as indicated by graph 2. the maximum output power is 220w. 10 a minimum of 300lfm of forced air cooling is required for proper operation of the cmp350. 11 all outputs must be derated linearly from maximum specified loads during operation above 50 c. 12 current share is a single wire share circuit that allows the main output on multiple cmp350 units to be operated in parallel. auxiliary channels share on -9604 and -9692 models by connecting the csaux channel. 13 the power fail detect and power ok signals are open-collector outputs which will sink 40ma or less in the low state and should be pulled up to a bias voltage with an appropriately sized resistor. min. max. vol 0v 0.4v iol 0a -40ma voh 4v 40v the system inhibit and output inhibit signals require a current source to be asserted high. min. max. vih 3.5v 15.0v iih 0ma -10ma 14 connection from trimaux2 to aux1set causes the output for ch. aux. 1 on models -9604 and -9692 to regulate at its nominal factory set voltage. 15 3 orthogonal axes, random vibration, 10 minute test per axes. 16 this product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. t1 t2 t1 varies with line and load t2 3 4ms t1 + t2 3 20ms output pfd signal ac input power good signal features current share forced main output and see note 12 auxiliary 1 if 5v or 3.3v power ok asserted low main output >75% see note 13 remote-sense 0.4v main output and auxiliary 1 if 5v or 3.3v system inhibit asserted high inhibits all outputs power fail detect asserted low indicates loss of ac; see note 13 4ms warning 15a * max. load for aux2 is 10a. max load for aux3 is 5a. graph 1 3.3 v channel load rated operation 10a 5a 0a 20a 15a 10a 5a 10a 8a sum of 12v channel loads* 15a * max. load for aux2 is 10a. max load for aux3 is 5a. graph 2 5 v channel load rated operation 10a 5a 0a 15a 10a 5a 10a 8a sum of 12v channel loads* trim down 12ch1 gnd1 trimain trim up trim up/down main channel trim connections trim up trim down 12ch2 gnd2 trimaux trim up/down aux. 1 channel trim connections. (-9601, -9602, -9603, 9606) aux. 2 channel trim connections (-9604, -9692) aux. 1 channel trim connections (-9604, -9692) trimaux2 is connected to aux1set by a factory fitted jumper to ensure ch. 1 regulates at the nominal set voltage to trim ch1, remove the jumper and connect a resistor between gnd3 and trimaux2 trimaux2 aux1set trimaux2 gnd3 trim up/down external output trimming (14) 350 watt ac/dc high wattage power supplies with pfc medium to high power ac/dc power supplies | 350w ac/dc page 74 http://www.artesyn.com 2
mechanical notes a a standard cover and fan assembly can be added during manufacturing. to order, add suffix 'cf' to the model number. e.g. cmp350-9601cf . b visual arrangement for j1 as seen from the front (output) side of the unit. c the dimensions of the cmp350-9604 and cmp350-9692 are slightly larger than shown below. the open frame dimensions are 10.2 x 5 x 1.75 inches and the enclosed dimensions are 10.7 x 5 x 1.75 inches. mating connectors (j1) mating connector type molex p/n 22-55-2241 or equivalent with molex p/n 70058 or equivalent crimp terminals. input connector iec for all enclosed models (suffix -cf). 3-way 0.375 inch pitch terminal block for uncovered models. output connectors (tb2) connector type for models -9601, -9602, -9603 and -9606 8-way 0.197 inch pitch terminal. (tb2) connector type for models -9604 and -9692 6-way 0.197 inch pitch terminal block. (tb3) connector type for models -9604 and -9692. 2-way 0.375 inch pitch terminal block. j1-1 j1a-12 j1-12 j1a-1 user interface connector j1 view vertical mount 2 row, 24 position all dimensions in inches (mm) 8 1 3.900 (99.06) 6.500 (165.1) 0.870 (22.098) 1/4 - 20 unc thread output studs ac input terminal block 2.250 (57.15) 0.164-32-unc-2b (6 places) (2 on side, 4 on bottom) 3/16" (4.76) max. thread penetration - typ. third angle projection tolerances unless otherwise specified .xx = 0.02 .xxx = 0.010 hi gnd lo tb1 6.500 (165.100) 2.250 (57.150) 0.400 (10.160) 10.000 (254.000) 9.90 (251.46) 0.410 (10.414) 0.125 ref. (3.175) 5.00 +0.00/-0.02 (127.00) 1.75 (44.45) see mechanical note c tb2 j1 1 j1 tb3 vmain + vmain - tb2 1 2 1 6 detail: tb2 is a 6 way connector on models -9604 and -9692 as shown above. page 75 350 watt ac/dc high wattage power supplies with pfc 350w ac/dc | medium to high power ac/dc power supplies
page 76 http://www.artesyn.com ds_cmp350_19990428.pdf data sheet ? artesyn technologies, 1999 the information and specifications contained in this data sheet are believed to be correct at time of publication. however, ar tesyn technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. specifications are subject to change without notice. no rights under any patent accompany the sale of any such product(s) or information contained herein. 2
|
