dual-in-line sockets long solder tail for multilayer pc-boards open frame www.mill-max.com 516-922-6000 14 series 111 quantity per tube total number of pins 10 0.5 0.2 0.3 40 111-xx-210-41-001000 4 0.2 0.3 0.4 102 111-xx-304-41-001000 6 0.3 0.3 0.4 67 111-xx-306-41-001000 8 0.4 0.3 0.4 50 111-xx-308-41-001000 10 0.5 0.3 0.4 40 111-xx-310-41-001000 14 0.7 0.3 0.4 28 111-xx-314-41-001000 16 0.8 0.3 0.4 25 111-xx-316-41-001000 18 0.9 0.3 0.4 22 111-xx-318-41-001000 20 1.0 0.3 0.4 20 111-xx-320-41-001000 22 1.1 0.3 0.4 18 111-xx-322-41-001000 24 1.2 0.3 0.4 16 111-xx-324-41-001000 28 1.4 0.3 0.4 14 111-xx-328-41-001000 20 1.0 0.4 0.5 20 111-xx-420-41-001000 22 1.1 0.4 0.5 18 111-xx-422-41-001000 24 1.2 0.4 0.5 16 111-xx-424-41-001000 28 1.4 0.4 0.5 14 111-xx-428-41-001000 32 1.6 0.4 0.5 12 111-xx-432-41-001000 24 1.2 0.6 0.7 16 111-xx-624-41-001000 28 1.4 0.6 0.7 14 111-xx-628-41-001000 32 1.6 0.6 0.7 12 111-xx-632-41-001000 36 1.8 0.6 0.7 11 111-xx-636-41-001000 40 2.0 0.6 0.7 10 111-xx-640-41-001000 42 2.1 0.6 0.7 9 111-xx-642-41-001000 48 2.4 0.6 0.7 8 111-xx-648-41-001000 50 2.5 0.6 0.7 8 111-xx-650-41-001000 52 2.6 0.6 0.7 7 111-xx-652-41-001000 50 2.5 0.9 1.0 8 111-xx-950-41-001000 52 2.6 0.9 1.0 7 111-xx-952-41-001000 64 3.2 0.9 1.0 6 111-xx-964-41-001000 ordering information a b c ? dip sockets with increased solder tail length of .170?, allowing application on multilayer pcbs up to .139? thickness. other lengths available upon request. ? hi-rel, 4-finger becu #30 clip rated at 3 amps. see page 208 for details. ? uses mill-max #0134 pin. see page 134 for details. xx= plating code see below specify plating code xx= 13 91 93 99 41 43 44 sleeve (pin) contact (clip) 10 ? au 200 ? sn/pb 200 ? sn/pb 200 ?sn/pb 200 ?sn 200 ? sn 200 ?sn 30 ? au 10 ?au 30 ? au 200 ? sn/pb 10 ?au 30 ? au 200 ?sn 2 o ( 3 % # for rohs compliance, select plating code. for the all gold option (xx=13) also change part number from 111-xx-xxx-41-0010 00 to 111-13-xxx-41-0011 00
|