ftmh?125?02?l?dv ftmh?116?02?f?dv?es www.samtec.com no. pins per row 1 ?tr option options mates with: clm, mle ?es option ftmh ?p option 05 thru 50 ?ec option ?ep option lead style ?02 = (1,91) .075" post (mates with mle) ?03 = (1,65) .065" post (mates with clm) note: some lengths, styles and options are non-standard, non-returnable. for complete speci cations and rec om mend ed pcb layouts see www .samtec.com? ftmh insulator material: black liquid crystal polymer terminal material: phosphor bronze current rating: 1.5a @ 80? ambient operating temp range: -55? to +125? plating: sn or au over 50? (1,27?) ni rohs compliant: ye s processing: max processing temp: 230? for 60 seconds, or 260? for 20 seconds 3x lead-free solderable: ye s -dv lead coplanarity: (0,10mm) .004" max -dh lead coplanarity: (0,10mm) .004" max (05-25) (0,15mm) .006" max (26-50) shrouded option removed for clarity a a (3,17) .125 no. of positions x (1,00) .03937 100 99 02 01 no. of positions x (1,00) .03937 + z (1,49) .059 (0,30) .012 sq typ (5,00) .197 (1,00) .03937 (1,80) .071 (5,21) .205 (2,59) .102 1 mm micro headers ftmh series f-208 a (1,91) .075 (1,65) .065 lead style ?02 ?03 option ?es ?ec ?ep z (1,57) .062 (4,06) .160 (5,49) .216 ?dh option ?dv option specifications ultra-low pro le option available. end shrouds available. call for ftm series speci cations. (1,27mm) .050" also available end shrouds with board locks available. molded end shrouds available for 05 through 08 positions. call samtec. application specific option plating option ?l = 10" (0,25m) gold on post, matte tin on tail ?f = gold ? ash on post, matte tin on tail
optional pick & place pads low pro le (1,79mm) .071" surface mount (1,00mm) .03937" micro pitch flex shroud options available ftmh?110?02?l?dv?p ftmh?130?02?l?dv?es ftmh?120?02?f?dv?ec ftmh?128?02?l?dv?ep www.samtec.com row option other options flex shroud options (?dv only) 9 pins/row minimum ?a = alignment pin (3 positions minimum) metal or plastic at samtec discretion (?dv only) ?k = (2,50mm) .098" dia polyimide film pick & place pad (?dh only) ?p = plastic pick & place pad (?dv only) (7 positions minimum) ?tr = tape & reel ? ep option ? ec option ?ep = end shroud with guide post (use only when mating with clm) ?es = end shroud ?ec = end shroud with locking clip (3,10) .122 (1,91) .075 dia (1,22) .048 (3,84) .151 (4,32) .170 (3,18) .125 x (5,08) .200 (3,18) .125 (0,64) .025 dia (0,69) .027 ? es option ?a option ?p option ?dv = dual vertical ?dh = dual horizontal
|