9 mm x 14 mm plastic package smd oscillator, ttl / hc-mos ism61 series ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 5/22/12_b specifications subjec t to change without notice page 1 product features: applications: low jitter, non-pll based output fibre channel cmos/ttl compatible logic levels server & storage compatible with leadfree processing sonet /sdh 802.11 / wifi t1/e1, t3/e3 system clock note: a 0.01 f bypass capacitor is recommended between vcc (p in 4) and gnd (pin 2) to minimize power supply noise. * not available at all frequencies. ** not available for all temperature ranges. *** frequency, supply, and load related p arameters. frequency 250 khz to 150.000 mhz output level hc-mos ttl ?0? = 0.1 vcc max., ?1? = 0.9 vcc min. ?0? = 0.4 vdc max., ?1? = 2.4 vdc min. duty cycle specify 50% 10% or 5% see table in part number guide rise / fall time 5 ns max. @ vcc = +3.3 vdc, 10 ns max. @ vcc = +5 vdc *** output load fo < 50 mhz = 10 ttl, fo > 50 mhz = 5 lsttl see table in part number guide frequency stability see frequency stability table (includes room temperature tolerance and stability over operating temperature) start-up time 10 ms max. enable / disable time 100 ns max. n.c. or 70% vdd = enable. 30% vdd = disable. supply voltage see input voltage table, tolerance 5 % current 70 ma max. *** operating see operating temperature table in part number guide storage -55 ? c to +125 ? c jitter: rms(1sigma) 1 mhz-75 mhz 76 mhz-150 mhz 5 ps rms (1 sigma) max. accumulated jitter (20k adjacent periods) 3 ps rms (1 sigma) max. accumulated jitter (20k adjacent periods) max integrated 1 mhz-75 mhz 76 mhz-150 mhz 1.5 ps rms (1 sigma -12khz to 20mhz) 1 ps rms (1 sigma -12khz to 20mhz) max total jitter 1 mhz-75 mhz 76 mhz-150 mhz 50 ps p-p (100k adjacent periods) 30 ps p-p (100k adjacent periods) part number guide sample part number: ism61 - 3251bh - 20.000 package input voltage operating temperature symmetry (duty cycle) output stability (in ppm) enable / disable frequency ism61 - 5 = 5.0 v 1 = 0 ? c to +70 ? c 5 = 45 / 55 max. 1 = 10ttl / 15 pf hc-mos **e = ? 10 h = enable - 20.000 mhz 3 = 3.3 v 6 = -10 ? c to +70 ? c 6 = 40 / 60 max. 6 = 30 pf **d = ? 15 o = n/c 7 = 3.0 v 3 = -20 ? c to +70 ? c 5 = 50 pf hc-mos (<40 mhz) **f = ? 20 2 = 2.7 v 4 = -30 ? c to +75 ? c **a = ? 25 6 = 2.5 v 2 = -40 ? c to +85 ? c b = ? 50 1 = 1.8 v* c = ? 100
9 mm x 14 mm plastic package smd oscillator, ttl / hc-mos ism61 series ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 5/22/12_b specifications subjec t to change without notice page 2 pb free solder reflow profile typical application *units are backward compatible with 240c reflow processes package information msl = 2a termination = e2 tape and reel information environmental specifications thermal shock mil-std-883, method 1011, condition a moisture resistance mil-std-883, method 1004 mechanical shock mil-std-883, method 2002, condition b mechanical vibration mil-std-883, method 2007, condition a resistance to soldering heat j-std-020c, tabl e 5-2 pb-free devices (except 2 cycles max) hazardous substance pb-free / rohs / green compliant solderability jesd22-b102-d method 2 (preconditioning e) terminal strength mil-std-883, method 2004, test condition d gross leak mil-std-883, method 1014, condition c fine leak mil-std-883, method 1014, condition a2, r1=2x10-8 atm cc/s solvent resistance mil-std-202, method 215 marking line 1: ilsi and date code (yww) line 2: frequency quantity per reel 1000 a 24 +/-.3 b 12 +/-.2 c 11.5 +/-.2 d 25 +/-1.5 e 80 / 100 f 180
|