1. when ordering, please specify termination and testing codes: cp336fra902m az termination: a = rohs compliant gold over nickel over silver- palladium-glass frit special order: c = tin-lead over gold over nickel over silver-palladium- glass frit f = tin-silver-copper over gold over nickel over silver- palladium-glass frit testing: z = cots h = screening per coilcraft cp-sa-10001 2. inductance measured at 100 mhz using an agilent/hp 4286a impedance analyzer and a coilcraft smd-a fxture. 3. dcr is specifed per winding. 4. current per winding that causes a 20c rise from 25c ambient. 5. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. ? eliminates virtually all common mode noise in high-speed, differential mode signal transmission applications such as usb 2.0, ieee1394, hdmi and lvds. ? most provide >25 db common mode attenuation and >100 ohms impedance. common mode common mode impedance typ (ohms) attenuation typ (db) inductance 2 dcr max 3 isolation i rms 4 part number 1 10 mhz 100 mhz 500 mhz 10 mhz 100 mhz 500 mhz min (nh) (ohms) (vrms) (ma) cp336fra421maz 14 42 70 1.1 2.3 8.4 23 0.12 250 500 cp336fra901maz 28 90 154 1.4 4.2 16.9 47 0.17 250 500 cp336fra172maz 57 170 303 2.3 6.7 22.0 84 0.25 250 500 cp336fra262maz 85 260 435 3.0 8.6 27.8 147 0.26 250 500 cp336fra372maz 118 370 641 4.5 11.9 34.3 189 0.32 250 500 cp336fra502maz 148 500 945 4.9 14.5 31.3 273 0.37 250 500 cp336fra672maz 246 670 1231 8.4 16.6 30.0 322 0.45 250 500 CP336FRA902MAZ 294 900 1715 8.7 18.7 30.5 413 0.65 250 250 3 4 2 1 common mode chokes for critical applications 0805 common mode chokes core material ferrite terminations gold over nickel over silver-palladium-glass frit. other terminations available at additional cost weight 14.9 C 15.2 mg ambient temperature C40c to +85c with i rms current, +85c to +105c with derated current storage temperature component: C55c to +105c. tape and reel packaging: C55c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) packaging 2000 per 7 reel; plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth document cp306-1 revised 09/07/12 0.065 1,65 max max 0.068 1,73 0.018 0,46 0.030 0,76 0.040 1,02 0.036 0,91 0.020 0,51 0.020 0,51 0.014 0,36 0.004 0,10 recommended land p attern max 0.090 2,29 12 43 1 2 4 3 dimensions are in inches mm ? ? coilcraft, inc. 2012 1102 silv er lak e road car y, il 60013 phone 800-981-0363 fa x 847-639-1508 email c ps@coilcraft.com www . coilcraft-cps . com this pr oduct may not be used in medical or hig h risk applications without prior coilcraft appr oval. specifications subject to change without notice. please check our web site for latest infor mation.
0805 common mode choke cp336fra document 306-2 typical attenuation (ref: 50 ohms) typical impedance vs frequency atten uation (db ) -902 -672 -262 -901 -421 -172 -502 -372 5 0 10 15 20 25 30 35 40 11 0 100 1000 frequency (mhz ) common mode diff erential mode (typical fo r all par ts) 1000 10000 100 10 1 11 0 1000 impedance (ohms) frequency (mhz) 100 -902 -672 -172 -901 -421 -262 -372 -502 document cp306-2 revised 09/07/12 ? ? coilcraft, inc. 2012 1102 silv er lak e road car y, il 60013 phone 800-981-0363 fa x 847-639-1508 email c ps@coilcraft.com www . coilcraft-cps . com this pr oduct may not be used in medical or hig h risk applications without prior coilcraft appr oval. specifications subject to change without notice. please check our web site for latest infor mation.
|
