View LP150E02-A2P1_5813826.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 specification for approval 15.0 sxga+ tft lcd title model lg electronics (compaq) buyer *when you obtain standard approval, please use the above model name without suffix lp150e02 *model a2p1 suffix lg.philips lcd co., ltd. supplier please return 1 copy for your confirmation with your signature and comments. / / / date signature products engineering dept. lg. philips lcd co., ltd y.s.kim / engineer s.w.moon / engineer prepared by reviewed by s.c.yun / chief engineer date signature ) ) ( ( final specification preliminary specification approved by y.s.ha / engineer www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 2 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 contents 10 8 interface connections 3-2 color input data refernece 3-5 22 designation of lot mark 8-1 22 packing form 8-2 22 packing 8 23 precautions 9 21 emc 7-2 1 cover 2 contents 3 record of revisions 4 general description 1 5 absolute maximum ratings 2 6 electrical specifications 3 6 electrical charactreistics 3-1 9 signal timing specifications 3-3 9 signal timing waveforms 3-4 11 power sequence 3-6 12 optical sfecifications 4 16 mechanical characteristics 5 20 reliablity 6 21 international standards 7 21 safety 7-1 page item no 24 storage 9-5 24 handling precautions for protection film 9-6 24 precautions for strong light exposure 25 appendix. enhanced extended display identification data a 24 electrostatic discharge control 9-3 23 mounting precautions 23 operating precautions 9-2 9-1 9-4 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 3 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 record of revisions note adjust luminance variation 12 update edid data 25,26 add color coordinates 12 adjust input current & power consumption limits 6 apr.15.2002 0.1 first draft (preliminary) - mar.20.2002 0.0 description page revision date revision no www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 4 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 1. general description general features 6-bit, 262,144 colors color depth 1400 horiz. by 1050 vert. pixels rgb strip arrangement pixel format 150 cd/m 2 (typ.) luminance, white total 4.63 watt(typ.) power consumption 540 g (typ.) weight transmissive mode, normally white display operating mode hard coating(3h) anti-glare treatment of the front polarizer surface treatment 0.2175 mm x 0.2175 mm pixel pitch 317.3(h) x 241.5(v) x 6.0(d) mm(max.) outline dimension 15.0 inches(38.1cm) diagonal active screen size the lp150e02 is a color active matrix liquid crysta l display with an integral cold cathode fluorescent lamp(ccfl) backlight system. the matrix employs a-s i thin film transistor as the active element. it is a transmissive type display operating in the n ormally white mode. this tft-lcd has 15.0 inches diagonally measured active display area with sxga+ resolution(1050 vertical by 1400 horizontal pixel a rray) each pixel is divided into red, green and blue sub- pixels or dots which are arranged in vertical strip es. gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for e ach dot, thus, presenting a palette of more than 262,144 col ors. the lp150e02 has been designed to apply the interfa ce method that enables low power, high speed, low emi. the lp150e02 is intended to support applications wh ere thin thickness, low power are critical factors and graphic display are important. in combination w ith the vertical arrangement of the sub-pixels, the lp150e02 characteristics provide an excellent flat display for office automation products such as notebook pc. cn 1 lvds & timing control block power block column driver circuit row dirver circuit tft-lcd (1400x1050) backlight lamp ass'y j1 :control & data :power www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 5 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 2. absolute maximum ratings the following are maximum values which, if exceeded , may cause faulty operation or damage to the unit. table 1. absolute maximum ratings storage operation 10 20 30 40 50 60 70 80 0 -20 dry bulb temperature [ ] 10 % 20 % 40 % 60 % 90% 80% 0 10 20 30 40 50 60 wet bulb temperature [ ] humidity[(%)rh] note : 1. temperature and relative humidity range a re shown in the figure below. wet bulb temperature should be 39 c max, and no condensation of water. 2. condition 1) non-operation, 150 ? -330 ? , 25 , 40~60%rh 2) i/f connector pins are subjected. 3) the surface of metal bezel and lcd are subjected except interface connector.(lcd side) 4) discharge interval time 1sec, 10 times each plac e at 25 5 c vdc 0.3 -0.3 gnd power input voltage-off units 1 %rh 90 10 h op operating ambient humidity 1 %rh 90 10 h st storage humidity 1 c 60 -20 t st storage temperature 1 c 50 0 t op operating temperature at 25 5 c vdc 4.0 2.7 vcc power input voltage-on max min parameter notes values symbol 2 electrostatic durability (esd) v esd kv 8.0 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 6 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 3. electrical specifications 3-1. electrical characteristics the lp150e02 requires two power inputs. one is emp loyed to power the lcd electronics and to drive the tft array and liquid crystal. the second input whic h powers the ccfl, is typically generated by an inverter. the inverter is an external unit to the l cd. table 2. electrical characteristics 2 ohm 110 100 90 zm differential impedance 7 watt 3.85 3.5 - p bl power consumption 6 min 3 - - ts discharge stabilization time at 0 c at 25 c v rms 1370 - - 5 khz 80 58 45 f bl operating frequency 4 vs established starting voltage v rms 1140 - - 3 v rms 805 685 655 v bl operating voltage ma rms 6.0 5.0 3.0 i bl operating current lamp : 1 watt 1.29 1.13 0.96 pc power consumption vdc 3.6 3.3 3.0 vcc power supply input voltage 1 ma 390 340 290 i cc power supply input current 8 hrs - - 10,000 life time module : parameter symbol max typ min notes unit values note : the design of the inverter must have specifi cations for the lamp in lcd assembly . the performance of the lamp in lcm, for example lif e time or brightness, is extremely influenced by the characteristics of the dc-ac inverter. so all t he parameters of an inverter should be carefully designed so as not to produce too much leakage curr ent from high-voltage output of the inverter. when you design or order the inverter, please make sure unwanted lighting caused by the mismatch of the lamp and the inverter(no lighting, flicker, etc ) never occurs. when you confirm it, the lcd C assembly should be operated in the same condition a s installed in you instrument. 1. the specified current and power consumption are under the vcc=3.3v, 25 c , f v =60hz condition whereas mosaic pattern is displayed and f v is the frame frequency. 2. this impedance value is needed to proper display and measured from lvds t x to the mating connector. 3. the variance of the voltage is 10%. 4. the voltage above v s should be applied to the lamps for more than 1 seco nd for start-up. otherwise, the lamps may not be turned on. the used lamp current is the lamp typical current. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 7 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 5. the output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform.(unsymmetrical ratio i s less than 10%) please do not use the inverter which has unsymmetrical voltage and unsymmetrical c urrent and spike wave. lamp frequency may produce interface with horizonta l synchronous frequency and as a result this may cause beat on the display. therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in ord er to prevent interference. 6. lets define the brightness of the lamp after be ing lighted for 5 minutes as 100%. t s is the time required for the brightness of the cent er of the lamp to be not less than 95%. 7. the lamp power consumption shown above does not include loss of external inverter. the used lamp current is the lamp typical current. 8. the life is determined as the time at which brig htness of the lamp is 50% compared to that of initi al value at the maximum lamp current(6.0 ma rms ) on condition of continuous operating at 25 2 c 9. requirements for a system inverter design, whic h is intended to have a better display performance, a better power efficiency and a more reliable lamp, a re following. it shall help increase the lamp lifetime and reduce leakage current. a. the asymmetry rate of the inverter waveform shou ld be less than 10%. b. the distortion rate of the waveform should be wi thin ? 2 10%. * inverter output waveform had better be more simil ar to ideal sine wave. do not attach a conducting tape to lamp connecting wire. if the lamp wire attach to a conducting tape, tft-l cd module has a low luminance and the inverter has abnormal action. because leakage current is occ urred between lamp wire and conducting tape. i p i -p * asymmetry rate: | i p C i Cp | / i rms * 100% * distortion rate i p (or i Cp ) / i rms www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 8 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 3-2. interface connections table 3. module connector pin configuration (cn1) notes description symbol pin [lvds transmitter] thine, thc63lvdf823a or equivalent [lvds receiver] thine, thc63lvdf824a [connector] lcd : gt101-30s-hr11, lg cable * jae fi-xb30sx-hfxx or jae fi-xb30s-hf or equivalent. matching : jae fi-x30m or equivalent [connector pin arrangement] lcd rear view the interface connections are compatible with isp (industry standard panels) 15.0 mounting and to p level interface requirements (version2, june,2000) defined by spwg (standard panels working group). this lcd employs two interface connections, a 30 pi n connector is used for the module electronics and the other connector is used for the integral ba cklight system. the electronics interface connector is a model gt10 1-30s-hr11 manufactured by lg cable. the pin configuration for the connector is shown in the tab le below. note: all gnd(ground) pins should be connected toge ther and to gnd which should also be connected to the lcds metal frame. all vcc (power input) pins s hould be connected together. the backlight interface connector is a model bhsr-0 2vs-1, manufactured by jst. the mating connector part number is sm02b-bhss-1 or equivalent. table 4. backlight connector pin configuration (j1 ) notes : 1. the high voltage side terminal is color ed pink and the low voltage side terminal is yellow 1 power supply for lamp (low voltage side) lv 2 1 power supply for lamp (high voltage side) hv 1 notes description symbol pin 1 30 +lvds differential clock(odd pixels) 18 ground 19 -lvds differential data (even pixels r0-r5, g0) 20 power supply, 3.3v typ. vcc 2 power supply, 3.3v typ. vcc 3 ddc 3.3v power v edid 4 no connection nc 5 ddc clock clk edid 6 ddc data data edid 7 -lvds differential data (odd pixels r0-r5, g0) odd_r in 0- 8 +lvds differential data (odd pixels r0-r5, g0 ) 9 ground vss 10 -lvds differential data (odd pixels g1-g5, b0-b1 ) 11 +lvds differential data (odd pixels g1-g5, b0-b1 ) 12 ground vss 13 -lvds differential data (odd pixels b2-b5, hs, vs, de) 14 +lvds differential data (odd pixels b2-b5, hs, vs, de) 15 ground vss 16 -lvds differential clock (odd pixels) 17 vss ground 1 ground 28 -lvds differential clock (even pixels) 29 +lvds differential clock (even pixels) 30 +lvds differential data (even pixels r0-r5, g0 ) 21 ground 22 -lvds differential data (even pixels g1-g5, b0-b1 ) 23 +lvds differential data (even pixels g1-g5, b0-b1 ) 24 ground 25 -lvds differential data (even pixels b2-b5, hs, vs, de) 26 +lvds differential data (even pixels b2-b5, hs, vs, de) 27 odd_r in 0+ odd_r in 1- odd_r in 1+ odd_r in 2- odd_r in 2+ odd_clk in - odd_clk in + even_r in 0- vss vss vss even_r in 0+ even_r in 1- even_r in 1+ even_r in 2- even_r in 2+ even_clk in - vss even_clk in + www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 9 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 3-3. signal timing specifications table 5. timing table t clk - - 8 t hbp horizontal back porch - - 8 t hfp horizontal front porch t hp - - 3 t vbp vertical back porch - - 2 t vfp vertical front porch t hp 1150 1100 1060 t vp period - - 2 t wv width - - 8 t wh width t clk 848 800 732 t hp period hsync vsync data enable mhz 54.5 54 52.5 f clk frequency dclk note unit max typ min symbol item this is the signal timing required at the input of the user connector. all of the interface signal ti ming should be satisfied with the following specifications and spe cifications of lvds tx/rx for its proper operation . 3-4. signal timing waveforms data enable, hsync, vsync hsync date enable vsync date enable t wh t hp t hfp t hbp t vp t wv t vbp t vfp t wha t wva condition : vcc =3.3v low: 0.3vcc high: 0.7vcc d clk : dual port operating www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 10 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 3-5. color input data reference the brightness of each primary color (red,green and blue) is based on the 6-bit gray scale data input for the color ; the higher the binary input, the brighter t he color. the table below provides a reference for color versus data input. table 6. color data reference 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (00) green 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 green (01) ... 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green (62) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 green (63) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (00) red 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 red (01) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 red (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 red (63) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (01) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (62) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (63) blue (00) white yellow magenta cyan blue green red black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 blue msb lsb green msb lsb red msb lsb b 5 b 4 b 3 b 2 b 1 b 0 g 5 g 4 g 3 g 2 g 1 g 0 r 5 r 4 r 3 r 2 r 1 r 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue color input color data www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 11 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 3-6. power sequence t 6 interface signal, v i (lvds signal of transmitter) power for lamp power supply for lcd vcc 90% 10% 10% 0v 90% t 1 t 2 t 5 valid data 0v off off lamp on t 7 t 3 t 4 notes : 1. please avoid floating state of interfac e signal at invalid period. 2. when the interface signal is invalid, be sure to pull down the power supply for lcd vcc to 0v. 3. lamp power must be turn on after power supply fo r lcd and interface signal are valid. (ms) - - 400 t 7 (ms) 10 - 0 t 6 (ms) 50 - 0 t 5 (ms) - - 200 t 4 (ms) - - 200 t 3 (ms) 50 - 0 t 2 (ms) 10 - - t 1 max. typ. min. units value parameter table 7. power sequence table www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 12 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 4. optical specification fig. 1 optical characteristic measurement equipment and method table 8. optical characteristics ta=25 c, vcc=3.3v, f v =60hz dclk= 54mhz, i bl = 6.0ma 5 viewing angle pr650 or equivalent color coordinates 4 response time 0.174 0.144 0.114 by 0.358 0.328 0.298 wx white y axis, down ( f =270 ) y axis, up ( f =90 ) x axis, left ( f =180 ) x axis, right( f =0 ) degree - 45 q r degree - 45 q l degree - 15 q u degree - 35 q d blue 0.374 0.344 0.314 wy 6 gray scale green red decay time rise time 0.345 0.315 0.285 gx 0.569 0.539 0.509 gy 0.603 0.573 0.543 rx 0.367 0.337 0.307 ry ms 30 20 - tr d 3 1.65 - - d white luminance variation 0.187 0.157 0.127 bx ms 20 10 - tr r max typ min 1 - 250 175 cr contrast ratio 2 cd/m 2 - 150 130 l wh surface luminance, white (5p, ave) parameter symbol notes units values lcd module optical stage(x,y) pritchard 880 or equivalent 50cm optical characteristics are determined after the un it has been on and stable for approximately 30 min utes in a dark environment at 25 c . the values specified are at an approximate distan ce 50cm from the lcd surface at a viewing angle of f and q equal to 0 . fig. 1 presents additional information concerning t he measurement equipment and method. -- - - www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 13 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 notes 1. contrast ratio(cr) is defined mathematical ly as : surface luminance with all white pixels contrast ratio = surface luminance with all black pixels 2. surface luminance is the average of 5 points acr oss the lcd surface 50cm from the surface with all pixels displaying white. for more informa tion see fig 1., when i bl =6.0ma. 3.the variation in surface luminance , the panel to tal variation ( d white ) is determined by measuring l on at each test position 1 through 13, and then dividi ng the maximum l on of 13 points luminance by minimum l on of 13 points luminance. for more information see f ig 2. d white = maximum(l 1 ,l 2 , l 13 ) / minimum(l 1 ,l 2 , l 13 ) 4. response time is the time required for the displ ay to transition from white to black(risetime, tr r ) and from black to white(decay time, tr d ). for additional information see fig 3. 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determined for the horizontal or x axis and the ver tical or y axis with respect to the z axis which is normal to the lcd surface. for more information see fig 4. 6. gray scale specification * f v =60hz 100.0 l63 80.5 l55 9.3 l23 20.0 l31 34.0 l39 52.5 l47 3.5 l15 1.0 l7 0.4 l0 luminance [%] (typ) gray level www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 14 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 fig. 3 response time the response time is defined as the following figur e and shall be measured by switching the input sign al for black and white. tr r tr d 100 90 10 0 % optical response white black white fig. 2 luminance active area 1/4point 13 1 2 3 12 4 11 5 6 7 9 10 8 10mm 10mm 10mm 10mm 1/2 point 3/4point 1/4point 1/2 point 3/4point www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 15 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 fig. 4 viewing angle normal y eye f q f = 0 , right f = 180 , left f = 270 , down f = 90 , up www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 16 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 5. mechanical characteristics the contents provide general mechanical characteris tics for the model lp150e02. in addition the figure s in the next page are detailed mechanical drawing of the lcd. 228.375 mm vertical hard coating(3h) anti-glare treatment of the front polarizer surface treatment 540g (typ.) 555g (max.) weight 231.4 0.5mm vertical 241.5 0.5mm vertical 5.7 0.3mm depth 304.5 mm horizontal active display area 307.5 0.5mm horizontal bezel area 317.3 0.5mm horizontal outline dimension www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 17 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 18 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 19 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 [ detail description of side mounting screw ] notes : 1. screw plated through the method of non-e lectrolytic nickel plating is preferred to reduce possibility that results in vertical and/ or horizontal line defect due to the conductive particles from screw surface. * mounting screw depth depth min. : a =2.0 depth max : b =2.5 * mounting screw dim. : c = 3.1(typ.) *torque : 2 kgf.cm(max) (measurement gauge : torque meter) www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 20 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 6. reliability environment test condition { result evaluation criteria } there should be no change which might affect the pr actical display function when the display quality test is conducted under normal operating condition. - on/off cycle : the display module will be capable of being opera ted over 24,000 on/off cycles (lamp power & vcc on/off) - mean time between failure : the lcd panel and interface board assembly (exclu ding the ccfl) have a mean time between failures of 30,000 hours with a confidence level 90 %. 0 ~ 10,000 feet (3,048m) 24hr 0 ~ 40,000 feet (12,192m) 24hr altitude operatin g storage / shipment 7 half sine wave, 180g, 2ms one shock of each six faces(i.e. run 180g 2ms for all six faces) shock test (non-operating) 6 sine wave, 10 ~ 500 ~ 10hz, 1.5g, 0.37oct/min 3 axis, 1hour/axis vibration test (non-operating) 5 ta= 0 c, 240h low temperature operation test 4 ta= 50 c, 50%rh, 240h high temperature operation test 3 ta= -20 c, 240h low temperature storage test 2 ta= 60 c, 240h high temperature storage test 1 conditions test item no. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 21 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 7. international standards 7-1. safety a) ul 1950 third edition, underwriters laboratories , inc. jan. 28, 1995. standard for safety of information technology equip ment including electrical business equipment. b) can/csa c22.2 no. 950-95 third edition, canadian standards association, jan. 28, 1995. standard for safety of information technology equip ment including electrical business equipment. c) en 60950 : 1992+a1: 1993+a2: 1993+a3: 1995+a4: 1 997+a11: 1997 iec 950 : 1991+a1: 1992+a2: 1993+a3: 1995+a4: 1996 european committee for electrotechnical standardizat ion(cenelec) european standard for safety of information technol ogy equipment including electrical business equipment. 7-2. emc a) ansi c63.4 methods of measurement of radio-nois e emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. american national standards institute(ansi), 1992 b) c.i.s.p.r limits and methods of measurement of radio interface characteristics of information technology equipment. international special committ ee on radio interference. c) en 55022 limits and methods of measurement of r adio interface characteristics of information technology equipment. european committee for electr otechnical standardization.(cenelec), 1998 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 22 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 8. packing 8-1. designation of lot mark a) lot mark a b c d e f g h i j k l m a,b,c : size d : year e : month f,g : panel code h : assembly code i,j,k,l,m : serial no. note 1. year b) location of lot mark 2. month serial no. is printed on the label. the label is at tached to the backside of the lcd module. this is subject to change without prior notice. 8-2. packing form a) package quantity in one box : 10 pcs b) box size : 374mm 329mm 311mm mark year 6 2006 2 2002 3 2003 4 2004 5 2005 0 2000 1 2001 7 9 8 7 2007 99 98 97 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 4 2 1 dec mar feb jan 3. serial no mark serial no. a0001 ~ a9999, - - - - , z9999 00001 ~ 99999 100,000 ~ 1 ~ 99,999 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 23 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1. mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applie d to the module. and the case on which a module is mounted s hould have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protectiv e plate to the surface in order to protect the pola rizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials fo r the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit b reak by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer s with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothe s with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials l ike chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lo wer temperature, it becomes longer.) (3) brightness depends on the temperature. (in lowe r temperature, it becomes lower.) and in lower temperature, response time(required ti me that brightness is stable after turned on) becom es longer. (4) be careful for condensation at sudden temperatu re change. condensation makes damage to polarizer o r electrical contacted parts. and after fading conden sation, smear or spot will occur. (5) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference sha ll be done by system manufacturers. grounding and shieldi ng methods may be important to minimized the interference. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 24 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make c ertain that treatment persons are connected to ground through w rist band etc. and dont touch interface pin direct ly. 9-3. electrostatic discharge control strong light exposure causes degradation of polariz er and color filter. 9-4. precautions for strong light exposure 9-5. storage (1) the protection film is attached to the bezel w ith a small masking tape . when the protection film is peeled off, static elec tricity is generated between the film and polarizer. this should be peeled off slowly and carefully by p eople who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) when the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the bezel after the protection film is peeled off. (3) you can remove the glue easily. when the glue r emains on the bezel surface or its vestige is recognized, please wipe them off with absorbent cot ton waste or other soft material like chamois soaked with normal-hexane. 9-6. handling precautions for protection film when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the m odule to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that they be stored in the contai ner in which they were shipped. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 25 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 appendix [a] - enhanced extended display identific ation data (eedid ? ?? ? ) byte# byte# value (decimal) (hex) (binary) 0 00 head e r 0 0 00000000 1 01 f f 11111111 2 02 f f 11111111 3 03 f f 11111111 head e r head e r head e r head e r 4 04 f f 11111111 5 05 f f 11111111 6 06 f f 11111111 7 07 0 0 00000000 8 08 eisa manufacturer code = lgp 3 0 00110000 9 09 f 0 11110000 10 0a product code = adw(LP150E02-A2P1) product code = adw(LP150E02-A2P1) product code = adw(LP150E02-A2P1) product code = adw(LP150E02-A2P1) 0 00 0 4 44 4 00000100 00000100 00000100 00000100 11 0b (hex, ls b f i r s t ) 9 99 9 f ff f 10011111 10011111 10011111 10011111 12 0c 32-bit serial number =don't care 0 0 00000000 vender/ vender/ vender/ vender/ 13 0d 0 0 00000000 product id product id product id product id 14 0e 0 0 00000000 15 0f 0 0 00000000 16 10 week of manufacture = don't care 0 0 00000000 17 11 year of manufacture = 2002 0 c 00001100 18 12 edid structure version # = 1 0 1 00000001 edid ver s i o n / edid ver s i o n / edid ver s i o n / edid ver s i o n / 19 13 edid revision # = 3 0 3 00000011 revision revision revision revision 20 14 video input definition = digital i/p,non tmds c rgb 8 0 10000000 21 15 max h image size(M)= 30.45M(30) 1 e 00011110 dis pl ay dis play dis play dis play 22 16 max v image size(M)= 22.8375M(23) 1 7 00010111 par ameter parameter parameter parameter 23 17 display gamma = 2.2 7 8 01111000 24 18 feature support(dpms) = active off, rgb color 2 8 00101000 25 19 red/ green low bits red/ green low bits red/ green low bits red/ green low bits 9 99 9 f ff f 10011111 10011111 10011111 10011111 26 1a blue/ white low bits blue/ white low bits blue/ white low bits blue/ white low bits 7 77 7 c cc c 01111100 01111100 01111100 01111100 27 1b red x rx =0.573 red x rx =0.573 red x rx =0.573 red x rx =0.573 9 99 9 2 22 2 10010010 10010010 10010010 10010010 28 1c red y ry =0.337 red y ry =0.337 red y ry =0.337 red y ry =0.337 5 55 5 6 66 6 01010110 01010110 01010110 01010110 29 1d green x gx =0.315 green x gx =0.315 green x gx =0.315 green x gx =0.315 5 55 5 0 00 0 01010000 01010000 01010000 01010000 color color color color 30 1e green y gy =0.539 green y gy =0.539 green y gy =0.539 green y gy =0.539 8 88 8 9 99 9 10001001 10001001 10001001 10001001 charact e r i s t i c charact e r i s t i c charact e r i s t i c charact e r i s t i c 31 1f blue x bx =0.157 blue x bx =0.157 blue x bx =0.157 blue x bx =0.157 2 22 2 8 88 8 00101000 00101000 00101000 00101000 32 20 blue y by =0.144 blue y by =0.144 blue y by =0.144 blue y by =0.144 2 22 2 4 44 4 00100100 00100100 00100100 00100100 33 21 white x wx = 0.328 white x wx = 0.328 white x wx = 0.328 white x wx = 0.328 5 55 5 3 33 3 01010011 01010011 01010011 01010011 34 22 white y wy = 0.344 white y wy = 0.344 white y wy = 0.344 white y wy = 0.344 5 55 5 8 88 8 01011000 01011000 01011000 01011000 35 23 established timing i 0 0 00000000 establis hed establis hed establis hed establis hed 36 24 established timing ii 0 0 00000000 timings timings timings timings 37 25 manufacturer's timings 0 0 00000000 38 26 standard timing identification 1 was not used 0 1 00000001 39 27 standard timing identification 1 was not used 0 1 00000001 40 28 standard timing identification 2 was not used 0 1 00000001 41 29 standard timing identification 2 was not used 0 1 00000001 42 2a standard timing identification 3 was not used 0 1 00000001 43 2b standard timing identification 3 was not used 0 1 00000001 44 2c standard timing identification 4 was not used 0 1 00000001 standard standard standard standard 45 2d standard timing identification 4 was not used 0 1 00000001 timing id timing id timing id timing id 46 2e standard timing identification 5 was not used 0 1 00000001 47 2f standard timing identification 5 was not used 0 1 00000001 48 30 standard timing identification 6 was not used 0 1 00000001 49 31 standard timing identification 6 was not used 0 1 00000001 50 32 standard timing identification 7 was not used 0 1 00000001 51 33 standard timing identification 7 was not used 0 1 00000001 52 34 standard timing identification 8 was not used 0 1 00000001 53 35 standard timing identification 8 was not used 0 1 00000001 54 36 detailed timing descriptor #1 3 0 00110000 55 37 1400 x1050@60? mode : pixel clock = 108? 2 a 00101 010 56 38 horizontal active = 1400 pixels 7 8 01111000 detailed detailed detailed detailed 57 39 horizontal blanking = 320 pixels 4 0 01000000 timing timing timing timing 58 3a horizontal active : horizontal blanking 5 1 010100 01 description description description description 59 3b vertical avtive = 1050 lines 1 a 00011010 #1 #1#1 #1 60 3c vertical blanking = 70 lines 4 6 01000110 61 3d vertical active : vertical blanking 4 0 01000000 62 3e horizontal sync. offset = 16 pixels 1 0 00010000 63 3f horizontal sync pulse width = 136 pixels 8 8 10001 000 field name and comments value (hex) www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 26 / 26 lp150e02 liquid crystal display ver. 0.1 april. 15. 2002 byte# byte# value (decimal) (hex) (binary) 64 40 vertical sync offset = 3 lines,sync width = 3 l ines 3 3 00110011 65 41 horizontal vertical sync offset/width upper 2b its 0 0 00000000 detailed detailed detailed detailed 66 42 horizontal image size = 304.5L(305) 3 1 00110001 ti ming timing timing timing 67 43 vertical image size = 228.375L(228) e 4 11100100 description description description description 68 44 horizontal & vertical image size 1 0 00010000 #1 #1#1 #1 69 45 horizontal border = 0 0 0 00000000 70 46 vertical border = 0 0 0 00000000 71 47 non-interlaced,normal display,no stereo,digital sep arate sync,h/v pol negatives 1 8 00011000 72 48 detailed timing descriptor #2 0 0 00000000 73 49 0 0 00000000 74 4a 0 0 00000000 75 4b 0 0 00000000 76 4c 0 0 00000000 77 4d 0 0 00000000 78 4e 0 0 00000000 detailed detailed detailed detailed 79 4f 0 0 00000000 timing timing timing timing 80 50 0 0 00000000 description description description description 81 51 0 0 00000000 #2 #2#2 #2 82 52 0 0 00000000 83 53 0 0 00000000 84 55 0 0 00000000 85 55 0 0 00000000 86 56 0 0 00000000 87 57 0 0 00000000 88 58 0 0 00000000 89 59 0 0 00000000 90 5a detailed timing descriptor #3 0 0 00000000 91 5b 0 0 00000000 92 5c 0 0 00000000 93 5d 0 0 00000000 94 5e 0 0 00000000 95 5f 0 0 00000000 96 60 0 0 00000000 detailed detailed detailed detailed 97 61 0 0 00000000 timing timing timing timing 98 62 0 0 00000000 description description description description 99 63 0 0 00000000 #3 #3#3 #3 100 64 0 0 00000000 101 65 0 0 00000000 102 66 0 0 00000000 103 67 0 0 00000000 104 68 0 0 00000000 105 69 0 0 00000000 106 6a 0 0 00000000 107 6b 0 0 00000000 108 6c detailed timing descriptor #4 0 0 00000000 109 6d 0 0 00000000 110 6e 0 0 00000000 111 6f 0 0 00000000 112 70 0 0 00000000 113 71 0 0 00000000 114 72 0 0 00000000 detailed detailed detailed detailed 115 73 0 0 00000000 timing timing timing timing 116 74 0 0 00000000 description description description description 117 75 0 0 00000000 #4 #4#4 #4 118 76 0 0 00000000 119 77 0 0 00000000 120 78 0 0 00000000 121 79 0 0 00000000 122 7a 0 0 00000000 123 7b 0 0 00000000 124 7c 0 0 00000000 125 7d 0 0 00000000 126 7e extension flag = 00 0 0 00000000 ext e ns i o n f l a g ext e ns i o n f l a g ext e ns i o n f l a g ext e ns i o n f l a g 127 7f checksum 3 33 3 9 99 9 00111001 00111001 00111001 00111001 checksum checksum checksum checksum field name and comments value (hex) www.datasheet.net/ datasheet pdf - http://www..co.kr/
www.datasheet.net/ datasheet pdf - http://www..co.kr/
error: syntaxerror offending command: --nostringval-- stack: / title ( ) / subject ( d:20100430142423+08'00' ) / moddate ( ) / keywords ( pdfcreator version 0.9.5 ) / creator ( d:20100430142423+08'00' ) / creationdate ( user ) / author -mark- www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of LP150E02-A2P1

	To Download LP150E02-A2P1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .