ocxo raltron electronics corp. 10651 n.w. 19 th st miami, florida 33172 u.s.a . phone: +001(305) 593-6033 fax: +001(305)594-3973 e-mail: sales@raltron.com internet: http:/www.raltron.com ocxo series 5100 features miniature ocxo in modified co-15 package low current cnsumption frequencies up to 155.520 mhz electrical performance parameter ocxo series 5000 at cut crystal sc cut crystal supply voltage, nom. 5v 5% (3.3v optional) power dissipation steady state 1.5 watt max. heat up power 3 watt max heat up time. 3 min max frequency range 1 to 155.520 mhz standard frequency adjustment 10ppm min (0 to 5v) 0.7ppm min (0 to 5v) 0.05 ppm 0.1 ppm 0.25 ppm 0.01 ppm 0.02 ppm 0.03 ppm freq. stability vs. temperature lx: 0c to 60c fz: -30c to 70c d3: -40c to 85 (standard, contact factory for different temp ranges and stabilities) freq. stability vs. supply changes 0.015 ppm max for 5% change 0.010 ppm max for 5% change freq. stability vs. load changes 0.01 ppm max for 5% change 0.005 ppm max for 5% change long term stability (aging) 4 ppm max for 10 years 0.005 ppm/day max. 1 ppm max for 10 years 0.002 ppm/day max. output hcmos/ttl/sine 0 to +7dbm (low voltage cmos available) harmonics -30dbc(sine output) spurious -75dbc(sine output) duty cycle 40/60% to 60/40%(hcmos) rise / fall time 10ns max. (hcmos,10%~90%vout, 90%~10%vout) short term stability 1 e-10 /sec 5 e-11 /sec phase noise offset phase noise 10hz -90 dbc/hz 100hz -125 dbc/hz 1000hz -135 dbc/hz 10000hz -150 dbc/hz offset phase noise 10hz -110 dbc/hz 100hz -125 dbc/hz 1000hz -140 dbc/hz 10000hz -150 dbc/hz
ocxo raltron electronics corp. 10651 n.w. 19 th st miami, florida 33172 u.s.a . phone: +001(305) 593-6033 fax: +001(305)594-3973 e-mail: sales@raltron.com internet: http:/www.raltron.com c l l c 5 1 3 4 2 .59 .295 (7.5) (15.0) .02 (0.5) dia. h .15 (3.8) min. .87 sq. (22.0 sq.) marking area how to order (part number) prefix output type cut type series revision temperature range stability frequency ox 2:hcmos 4:lvcmos 6:sine 0:at (no vcontrol ) 1: sc (no vcontrol ) 4: at (elect vcontrol) 5: sc (elect vcontrol) 50:5000 a first letter lowest temperature, second letter highest temperature: from a=-55c to z=+70c, then: 1=+75c, 2=+80c, 3=+85c? in 5c steps example: lz: +0c to +70c lx: +0c to +60c fz: -30c to +70c d3: -40c to +85c value x 10e-2 in ppm example 28= 0.28pp m 10= 0.1ppm in mhz example : ox2551a-lz- 3 -10.000 ox2551a-lz- 3 -10.000 ox2551a-lz- 3 -10.000 ox2551a-lz- 3 -10.000 frequency 10 mhz temp stability = 3 x 10e-2 = 0.03 ppm operating temp range = 0c to +70c revision "a" series 5100 sc cut crystal, electrical control voltage output hcmos prefix: ocxo mechanical specification height, max. ?h?: 0.45? / 11.5mm outline tolerance: 0.015? / 0.4mm pin functions: [1] n/c or electrical control voltage [2] n/c or voltage reference out [3] supply voltage [4] rf output [5] case / ground
|