37.0-40.0 ghz gaas mmic buffer amplifier, qfn 21.0 db small signal gain +22.0 dbm psat +20.0 dbm p1db +30.5 dbm output ip3 variable gain with adjustable bias 3x3mm, qfn 100% rf, dc and output power testing features page 1 of 6 electrical characteristics (ambient temperature t = 25 o c) parameter frequency range (f ) input return loss (s11) output return loss (s22) small signal gain (s21) reverse isolation (s12) output power for 1db compression (p1db) saturated output power (psat) output ip3 (psci = 4 dbm) drain bias voltage (vd1,2,3) gate bias voltage (vg1,2,3) supply current (id1,2,3) units ghz db db db db dbm dbm dbm v v ma min. 37.0 - - 17.0 - - 19.5 27.0 - -1.0 - typ. - 7.0 10.0 21.0 40.0 20.0 22.0 30.5 4.0 -0.3 250 max. 40.0 - - 24.5 - - - - 4.0 -0.1 300 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2011 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. b1014-qt mimix broadbands three stage 37.0-40.0 ghz gaas mmic buffer amplifier has a small signal gain of 21.0 db and 20.0 dbm p1db output compression point. the device also provides variable gain regulation with adjustable bias. the device is ideally suited as an lo or rf buffer stage with broadband performance at a very low cost. the device comes in an rohs compliant 3x3mm qfn surface mount package offering excellent rf and thermal properties. this device has been designed for use in 38 ghz point-to-point microwave radio applications. general description absolute maximum ratings (1) channel temperature directly affects a devices mttf. channel temperature should be kept as low as possible to maximize lifetime. (2) for saturated performance it recommended that the sum of (2*vdd + abs(vg)) < 9v supply voltage (vd1,2,3) supply voltage (vg1,2,3) input power (pin) abs. max. junction/channel temp max. operating junction/channel temp continuous power dissipation (pdiss) at 85 oc thermal resistance operating temperature (ta) storage temperature (tstg) mounting temperature esd min. - machine model (mm) esd min. - human body model (hbm) msl level +4.3v -1.5v < vg < 0v +20 dbm see mttf graph 1 150 oc 1.2 w 47 oc/w -55 oc to mttf graph 1 -65 to +165 oc see solder reflow profile class a class 1a msl3 january 2011 - rev 10-jan-11
37.0-40.0 ghz gaas mmic buffer amplifier, qfn b1014-qt buffer amplifier measurements page 2 of 6 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2011 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2011 - rev 10-jan-11 xb1014-qt: output return loss (s22) vd = 4v, id1 = id2 = 62.5 ma, id3 = 125 ma -3 0 -2 5 -2 0 -1 5 -1 0 - 5 0 5 1 0 3 7 3 7 . 5 3 8 3 8 . 5 3 9 39 . 5 4 0 frequency (ghz) s22 (db) xb1014-qt: reverse isolation (s12) vd = 4v, id1 = id2 = 62.5 ma, id3 = 125 ma -6 0 -5 5 -5 0 -4 5 -4 0 -3 5 -3 0 -2 5 -2 0 3 7 3 7 . 5 3 8 3 8 . 5 3 9 3 9 . 5 4 0 frequency (ghz) s12 (db) xb1014-qt: small signal gain (s21) vd = 4v, id1 = id2 = 62.5 ma, id3 = 125 ma 0 5 1 0 1 5 2 0 2 5 3 0 3 7 3 7 . 5 3 8 38. 5 3 9 3 9 . 5 4 0 frequency (ghz) s21 (db) xb1014-qt: input return loss (s11) vd = 4v, id1 = id2 = 62.5 ma, id3 = 125 ma -3 0 -2 5 -2 0 -1 5 -1 0 - 5 0 5 1 0 3 7 3 7 . 5 3 8 3 8 . 5 3 9 3 9 . 5 4 0 frequency (ghz) s11 (db) xb1014-qt: oip3 vs freq pscl=+5dbm; vd1,2,3=4.0v, id1=id2=62.5ma, id3=125ma 2 6 2 7 2 8 2 9 3 0 3 1 3 2 3 3 3 4 3 5 3 6 3 7 37 . 5 3 8 38 . 5 3 9 39 . 5 4 0 frequency (ghz) oip3 (dbm) xb1014-qt: c/i3 vs freq pscl=+5dbm; vd1,2,3=4.0v, id1=id2=62.5ma, id3=125ma 4 0 4 2 4 4 4 6 4 8 5 0 5 2 5 4 5 6 5 8 6 0 3 7 3 7 . 5 3 8 3 8 . 5 3 9 3 9. 5 4 0 frequency (ghz) c/i3 (dbc)
37.0-40.0 ghz gaas mmic buffer amplifier, qfn b1014-qt buffer amplifier measurements (cont.) page 3 of 6 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2011 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2011 - rev 10-jan-11 xb1014-qt: p1db vs freq vd1,2,3=4.0v, id1=id2=62.5ma, id3=125ma 1 6 1 7 1 8 1 9 2 0 2 1 2 2 2 3 2 4 2 5 2 6 3 7 3 7 . 5 3 8 38 . 5 3 9 39. 5 4 0 frequency (ghz) p1db (dbm) xb1014-qt: psat vs freq vd1,2,3=4.0v, id1=id2=62.5ma, id3=125ma 1 6 1 7 1 8 1 9 2 0 2 1 2 2 2 3 2 4 2 5 2 6 3 7 3 7 . 5 3 8 38 . 5 3 9 3 9. 5 4 0 frequency (ghz) psat (dbm)
37.0-40.0 ghz gaas mmic buffer amplifier, qfn b1014-qt page 4 of 6 package dimensions / layout functional block diagram/ pi n designations pin designations pin number 3 5 6 7 10 13 14 15 pin name rf in vg1 vg2 vg3 rf out vd3 vd2 vd1 pin function rf input gate 1 bias gate 2 bias gate 3 bias rf output drain 3 bias drain 2 bias drain 1 bias nominal value - approx. -0.3v approx. -0.3v approx. -0.3v - 4v, 125 ma 4v, 62.5 ma 4v, 62.5 ma mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2011 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2011 - rev 10-jan-11 r f i n v d 1 v d 2 v d 3 v g 1 v g 2 v g 3 g n d g n d r f o u t g n d g n d
37.0-40.0 ghz gaas mmic buffer amplifier, qfn b1014-qt page 5 of 6 app note [1] biasing - it is recommended to bias the amplifier with vd=4.0v and id total =250ma. it is also recommended to use active biasing to keep the currents constant as the rf power and temperature vary; this gives the most reproducible results. depending on the supply voltage available and the power dissipation constraints, the bias circuit may be a single transistor or a low power operational amplifier, with a low value resistor in series with the drain supply used to sense the current. the gate of the phemt is controlled to maintain correct drain current and thus drain voltage. the typical gate voltage needed to do this is -0.3v. typically the gate is protected with silicon diodes to limit the applied voltage. also, make sure to sequence the applied voltage to ensure negative gate bias is available before applying the positive drain supply. app note [2] bias arrangement - each dc pin (vd and vg) needs to have dc bypass capacitance (100pf/10nf/1uf) as close to the package as possible. mttf typical application factory automation and identification mixer mimix broadband mmic-based 37.0-40.0 ghz transmitter block diagram rf out 37.0-39.5 ghz xu1019-qh xp1080-qk xb1014-qt coupler if in 2 ghz lo buffer x2 x xb1014-qt: mttf hours vs. package base temperature vd1,2,3=4v; id1=id2=62.5ma, id3=125ma 1 .0 e+ 0 3 1 .0 e+ 0 4 1 .0 e+ 0 5 1 .0 e+ 0 6 1 .0 e+ 0 7 1 .0 e+ 0 8 1 .0 e+ 0 9 1 .0 e+ 1 0 1 .0 e+ 1 1 1 .0 e+ 1 2 1 .0 e+ 1 3 1 .0 e+ 1 4 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 1 0 0 1 1 0 1 2 0 package base temp (oc) mttf (hours) xb1014-qt: tch (max) vs. package base temperature vd1,2,3=4v; id1=id2=62.5ma, id3=125ma 0 2 0 4 0 6 0 8 0 1 0 0 1 2 0 1 4 0 1 6 0 1 8 0 2 0 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 1 1 0 1 2 0 package base temp (oc) tch_max (oc) xb1014-qt: operating power de-rating curve (continuous) 0 . 0 0 . 2 0 . 4 0 . 6 0 . 8 1 . 0 1 . 2 1 . 4 1 . 6 1 . 8 2 . 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 1 1 0 1 2 0 13 0 14 0 15 0 pdiss (w) package base temp (oc) mimix designator -qt package type qfn (3x3mm) p 1 component pitch 8mm p 0 hole pitch 4mm w tape width 12mm number of leads offered 16 reel diameter 329mm (13in) units per reel 2000 component orientation: parts are to be oriented with the pin 1 closest to the tape's round sprocket holes on the tapes trailing edge. note: tape and reel packaging is ordered with a -000t suffix. package is available in 500 unit reels through designated sales channels. minimum order quantities should be discussed with your local sales representative. mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2011 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2011 - rev 10-jan-11
37.0-40.0 ghz gaas mmic buffer amplifier, qfn b1014-qt page 6 of 6 life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. package attachment - this packaged product from mimix broadband is provided as a rugged surface mount package compatible with high volume solder installation. vacuum tools or other suitable pick and place equipment may be used to pick and place this part. care should be taken to ensure that there are no voids or gaps in the solder connection so that good rf, dc and ground connections are maintained. voids or gaps can eventually lead not only to rf performance degradation, but reduced reliability and life of the product due to thermal stress. mimix lead-free rohs compliant program - mimix has an active program in place to meet customer and governmental requirements for eliminating lead (pb) and other environmentally hazardous materials from our products. all mimix rohs compliant components are form, fit and functional replacements for their non-rohs equivalents. lead plating of our rohs compliant parts is 100% matte tin (sn) over copper alloy and is backwards compatible with current standard snpb low-temperature reflow processes as well as higher temperature (260c reflow) pb free processes. part number for ordering description xb1014-qt-0g00 matte tin plated rohs compliant 3x3 16l qfn surface mount package in bulk quantity xb1014-qt-0g0t matte tin plated rohs compliant 3x3 16l qfn surface mount package in tape and reel xb1014-qt-ev1 xb1014-qt evaluation board handling and assembly information caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: ? do not ingest. ? do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by- products are dangerous to the human body if inhaled, ingested, or swallowed. ? observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. typical reflow profiles reflow profile ramp up rate activation time and temperature time above melting point max peak temperature time within 5 oc of peak ramp down rate snpb 3-4 oc/sec 60-120 sec @ 140-160 oc 60-150 sec 240 oc 10-20 sec 4-6 oc/sec pb free 3-4 oc/sec 60-180 sec @ 170-200 oc 60-150 sec 265 oc 10-20 sec 4-6 oc/sec factory automation and identification mimix designator -qt package type qfn (3x3mm) p 1 component pitch 8mm p 0 hole pitch 4mm w tape width 12mm number of leads offered 16 reel diameter 329mm (13in) units per reel 2000 component orientation: parts are to be oriented with the pin 1 closest to the tape's r ound sprocket holes on the tapes trailing edge. note: tape and reel packaging is ordered with a -0g0t suffix. package is available in 500 unit reels through designated sales channels. minimum order quantities should be discussed with your local sales representative. ordering information c a u t i o n : e s d s e n s i t i ve appropriate precautions in handling, packaging and testing devices must be observed. proper esd procedures should be followed when handling this device. mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2011 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2011 - rev 10-jan-11
|
