cystech electronics corp. spec. no. : c330la issued date : 2003.04.16 revised date : page no. : 1/3 1N582XLA cystek product specification 3.0amp. axial leaded schottky barrier diodes 1N582XLA series features ? for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ? plastic material used carries underwriters laboratory flammability classification 94v-0 ? low leakage current ? high surge capability ? high temperature soldering: 250 c/10 seconds at terminals ? high reliability mechanical data ? case: do-201ad molded plastic. ? terminals: axial leads, solderable per mil-std-202 method 208 ? polarity: indicated by cathode band. ? weight: 1.10 gram maximum ratings and electrical characteristics ( rating at 25 c ambient temperature unless otherwise noted. single phase, half wave, 60hz, resistive or inductive load. ) type 1n5820 1n5821 1n5822 parameter conditions symbol min typ max units repetitive peak reverse voltage v rrm 20 30 40 v maximum rms voltage v rms 14 21 28 v maximum dc blocking voltage v r 20 30 40 v maximum instantaneous forward voltage i f =3a (note 1) v f 0.475 0.500 0.525 v maximum average forward rectified current i o 3 a peak forward surge current 8.3ms single half sine wave superimposed on rated load(jedec method) i fsm 80 a v r =v rrm ,t a =25 (note 1) 2 ma maximum dc reverse current v r =v rrm ,t a =125 (note 1) i r 20 ma maximum thermal resistance junction to ambient (note 2) r th , ja 40 /w diode junction capacitance f=1mhz a nd applied 4v reverse voltage c j 250 pf storage temperature tstg -65~+125 operating temperature t j -65~+125 notes: 1.pulse test, pulse width=300 sec, 2% duty cycle
cystech electronics corp. spec. no. : c330la issued date : 2003.04.16 revised date : page no. : 2/3 1N582XLA cystek product specification characteristic curves forward current derating curve 0 0.5 1 1.5 2 2.5 3 3.5 050100150 ambient temperature---ta() average forward current---io(a) maximum non-repetitive forward surge current 0 10 20 30 40 50 60 70 80 90 110100 number of cycles at 60hz peak forward surge current---ifsm( a) tj=25, 8.3ms single half sine wave jedec method forward current vs forward voltage 0.01 0.1 1 10 100 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 forward voltage---vf(v) forward current---if(a) tj=25, pulse width=300s 1% duty cycle junction capacitance vs reverse voltage 0 100 200 300 400 500 600 700 0.01 0.1 1 10 100 reverse voltage---vr(v) junction capacitance---cj(pf) reverse leakage current vs reverse voltage 0.01 0.1 1 10 100 0 20406080100120140 reverse voltage---vr(v) reverse leakage current---ir(m a) tj=75 tj=25
cystech electronics corp. spec. no. : c330la issued date : 2003.04.16 revised date : page no. : 3/3 1N582XLA cystek product specification do-201 dimension *:typical inches millimeters inches millimeters dim min. max. min. max. dim min. max. min. max. a 0.0472 0.0512 1.20 1.30 d 1.0000 - 25.40 - b 1.0000 - 25.40 - e 0.1890 0.2087 4.80 5.30 c 0.2835 0.3740 7.20 9.50 notes : 1.controlling dimension : millimeters. 2.maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.if there is any question with packing spec ification or packing method, please cont act your local cystek sales office. material : ? lead : axial leads, solderable per mil-std-202, method 208 guaranteed. ? mold compound : epoxy resin family, flammability solid burning class: ul94v-0 important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of cystek. ? cystek reserves the right to make changes to its products without notice. ? cystek semiconductor products are not warranted to be suitab le for use in life-support applications, or systems. ? cystek assumes no liability for any consequence of customer pr oduct design, infringement of pat ents, or application assistance . e b c a d do-201 molded plastic package cystek package code: la 1n582x marking : on the cylindrical surface
|
