|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
spec no. tq3c-8eaf0-e1deu57-00 ? s p e c date july 15, 2010 t y p e : t c g 0 5 7 v g l b l - c 5 0 < 5.7 inch vga transmissive color tft with led backlight and touch panel > c o n t e n t s 1. application 2. construction and outline 3. mechanical specifications 4. absolute maximum ratings 5. electrical characteristics 6. optical characteristics 7. interface signals 8. input timing characteristics 9. backlight characteristics 10. design guidance for analog touch panel 11. lot number identification 12. warranty 13. precautions for use 14. reliability test data 15. outline drawing kyocera corporation ? kagoshima hayato plant lcd division ? ? ? this specification is subject to change without notice. consult kyocera before ordering. designed by: engineering dept. confirmed by: qa dept. original issue date prepared checked approved checked approved july 15, 2010 " v h
www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1deu57-00 part no. TCG057VGLBL-C50 page - warning 1. this kyocera lcd module has been sp ecifically designed for use only in electronic devices and industrial mach ines in the area of audio control, office automation, industrial control, home appliances, etc. the module should not be used in applications where the highest level of safety and reliability are required and module fa ilure or malfunction of such module results in physical harm or loss of life, as well as enormous damage or loss. such fields of applications include, without limitation, medical, aerospace, communications infrastructure, atomic energy control. kyocera expressly disclaims any and all liability resulting in any way to the use of the module in such applications. 2. customer agrees to indemnify, defend and hold kyocera harmless from and against any and all actions, claims, damages, liabilities, awards, costs, and expenses, including legal expenses, resulting from or arising out of customer's use, or sale for use, or kyocera modules in applications. caution 1. kyocera shall have the right, whic h customer hereby acknowledges, to immediately scrap or destroy tooling for kyocera modules for which no purchase orders have been received from the customer in a two-year period. www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1deu57-00 part no. TCG057VGLBL-C50 page - revision record designed by : engineering dept. confirmed by : qa dept. date prepared checked approved checked approved rev.no. date page descriptions www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1deu57-00 part no. TCG057VGLBL-C50 page 1 m306001 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 1. application this document defines the specification of TCG057VGLBL-C50. (rohs compliant) 2. construction and outline lcd backlight system polarizer additional circuit touch panel surface film : transmissive color dot matrix type tft : led : glare treatment : timing controller, power supply (3.3v input) (without constant current circuit for led backlight) : analog type(glass/glass) : glare anti-finger print treatment 3. mechanical specifications 3-1. lcd item specification unit outline dimensions 1) 127.2(w)100.4(h)7.24(d) mm active area 115.2(w)86.4(h) (14.4cm/5.7 inch(diagonal)) mm dot format 640(b,g,r)(w)480(h) dot dot pitch 0.06(w)0.18(h) mm base color 2) normally white - mass (tbd) g 1) projection not included. please refer to outline for details. 2) due to the characteristics of the lcd material, the color varies with environmental temperature. 3-2. touch panel item specification unit input radius-0.8 stylus or finger - actuation force 0.1 ? 2.0 n striking(finger-input) 1) 1 million hits operating life sliding(stylus?input) 2) 100 thousand characters transmittance typ.80(at full wavelength) ? reflectance typ.15(550nm) ? surface hardness 3h or more(pencil hardness) - www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1deu57-00 part no. TCG057VGLBL-C50 page 2 m306001 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 1) striking test condition te sti ng ro d : silicon rubber (hardness:60),tip : r = 4.0 testing location : in active area input voltage : dc5v load : 2.94n cycle : 5hits/sec judgment : no defect in function : no appearance defect which causes trouble to use. *dents, blurs and marks on surface film : neglected 2 ) sliding test condition testing rod : polyacetal resin, tip : r = 0.8 testing location : in active area input voltage : dc5v load : 2.45n input length : 10mm input speed : 50mm/sec sliding times : 10mm sliding (back and forth) counts as 2 times. judgment : no defect in function : no appearance defect which causes trouble to use. *dents, blurs and marks on surface film : neglected www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1deu57-00 part no. TCG057VGLBL-C50 page 3 m306001 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 4. absolute maximum ratings 4-1. electrical absolute maximum ratings item symbol min. max. unit supply voltage v dd 0 4.0 v input signal voltage 1) v in -0.3 6.0 v led forward current 2) if - 30 ma reversed voltage 2) vr - 5 v supply voltage for touch panel v tp 0 6.0 v input current of touch panel i tp 0 0.5 ma 1) input signal : ck, r0 ? r5, g0 ? g5, b0 ? b5, h sync , v sync , enab, r/l, u/d 2) for each ?an-ca? 4-2. environmental absolute maximum ratings item symbol min. max. unit operating temperature 1) t op -20 70 c storage temperature 2) t sto -30 80 c operating humidity 3) h op 10 4) %rh storage humidity 3) h sto 10 4) %rh vibration - 5) 5) - shock - 6) 6) - 1) operating temperature means a temperature which operation shall be guaranteed. since display performance is evaluated at 25c, another temperature range should be confirmed. 2) temp. = -30c ? 48h , temp. = 80c ? 168h ? ? ? store lcd at normal temperature/humidity. keep them free from vibration and shock. an lcd that is kept at a low or a high temperature for a long time can be defective due to other conditions, even if the low or high temperature satisfies the standard. ? (please refer to ?precautio ns for use? for details.) 3) non-condensing 4) te mp. ? 40c, 85%rh max. ? ? temp. ? 40c, absolute humidity shall be less than 85%rh at 40c. ? 5) ? ? frequency 10 ? 55 hz vibration width 0.15mm acceleration value (0.3 ? 9 m/s 2 ) interval 10-55-10 hz ? minutes ? ? ? ? ? ? ? 2 hours in each direction x, y, z (6 hours total) ? ? ? ? ? ? ? eiaj ed-2531 6) acceleration: 490 m/s 2 , pulse width: 11 ms 3 times in each dire ction: x, y, z ? ? ? eiaj ed-2531 www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1deu57-00 part no. TCG057VGLBL-C50 page 4 m306001 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 5. electrical characteristics 5-1. lcd ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? temp. = -20 ? 70c item symbol condition min. typ. max. unit supply voltage 1) v dd - 3.0 3.3 3.6 v current consumption i dd 2) - 170 220 ma permissive input ripple voltage v rp - - - 100 mvp-p v il "low" level 0 - 0.3v dd v input signal voltage 3) v ih "high" level 0.7v dd - v dd v 1) v dd -turn-on conditions ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0 ? t1 ? 20ms ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0 ? t2 ? 50ms ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0 ? t3 ? 1s 2) display pattern: v dd = 3.3v, temp. = 25c 123 456 ~~~~~~~~~~~~~~~ 1918 1919 1920 (dot) ? 1 2 3 : : : 479 480 (dot) ????????? ?????????? ????????? ?????????? ????????? ?????????? ????????? ?????????? 3) input signal : ck, r0 ? r5, g0 ? g5, b0 ? b5, h sync , v sync , enab, r/l, u/d 3.0v 3.0v 0.3v t1 t2 t3 signal 3) www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1deu57-00 part no. TCG057VGLBL-C50 page 5 m306001 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 5-2. touch panel item symbol condition min. typ. max. unit supply voltage for touch panel v tp - - 5.0 - v xl-xr - 200 - 1200 ? terminal resistance 1) yu-yl - 200 - 1000 ? linearity 2) - - less than 2.5 % insulation resistance 3) - dc25v 50 - - m ? chattering 4) - at on/off less than 10 ms 1) resistance between terminal xl and xr, or between yu and yl 2) apply 5vdc to the terminal xl-xr, and measure the output voltage at terminal y when a random input is applied in the active area. measure the difference between the output and theoretical voltages. (measure the actual voltage at the terminal using the same method.) 3) resistance between the up per and lower terminals. 4) apply 5vdc to the terminal xl-xr, and measure the oscillation at terminal y when applying a random input in the active area. (measure the oscillation at terminal x using the same method.) voltage ?y chattering ?????? time e linearity ????a? e1-e0 ? emax e1 e0 theoretical voltage g??y output voltage z??y voltage ?y active area ??a??? (%) www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1deu57-00 part no. TCG057VGLBL-C50 page 6 m306001 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 6. optical characteristics ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? measuring spot = 6.0mm, temp. = 25c item symbol condition min. typ. max. unit rise r = =0 - 10 - ms response time down d = =0 - 25 - ms upper - 80 - lower - 80 - deg. left - 80 - viewing angle range view direction : 6 o?clock (gray inversion) right cr ? 5 - 80 - deg. contrast ratio cr = =0 300 500 - - brightness l if=15ma/line 200 290 - cd/m 2 x 0.56 0.61 0.66 red y = =0 0.32 0.37 0.42 x 0.29 0.34 0.39 green y = =0 0.52 0.57 0.62 x 0.09 0.14 0.19 blue y = =0 0.06 0.11 0.16 x 0.28 0.33 0.38 chromaticity coordinates white y = =0 0.30 0.35 0.40 - 6-1. definition of contrast ratio cr(contrast ratio) 1 brightness with all pixels "white" brightness with all pixels "black" 6-2. definition of response time 90./;5,:: ? + ? 9 /0;, 3(*2 /0;, www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1deu57-00 part no. TCG057VGLBL-C50 page 7 m306001 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 6-3. definition of viewing angle 6-4. brightness measuring points 1) rating is defined on the average in the viewing area. (measured point 1 ? 5) 2) measured 30 minutes after the led is powered on. (ambient temp. = 25c) ?? ? ?@ @ ? ?? ? ?@ ? ?+09,*;065 ?+09,*;065 @ (dot) (dot) 803 1603 2403 60 120 180 1 2 3 4 5 www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1deu57-00 part no. TCG057VGLBL-C50 page 8 m306001 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 7. interface signals 7-1. lcd no. symbol description i/o note 1 gnd gnd - 2 ck clock signal for sampling each data signal i 3 h sync horizontal synchronous signal (negative) i 4 v sync vertical synchronous signal (negative) i 5 gnd gnd - 6 r0 red data signal (lsb) i 7 r1 ? red data signal i 8 r2 ? red data signal i 9 r3 ? red data signal i 10 r4 ? red data signal i 11 r5 ? red data signal (msb) i 12 gnd ? gnd - 13 g0 ? green data signal (lsb) i 14 g1 ? green data signal i 15 g2 ? green data signal i 16 g3 ? green data signal i 17 g4 ? green data signal i 18 g5 green data signal (msb) i 19 gnd ? gnd - 20 b0 ? blue data signal (lsb) i 21 b1 ? blue data signal i 22 b2 ? blue data signal i 23 b3 ? blue data signal i 24 b4 ? blue data signal i 25 b5 ? blue data signal (msb) i 26 gnd ? gnd - 27 enab signal to settle the hori zontal display position (positive) i 1) 28 v dd ? 3.3v power supply - 29 v dd ? 3.3v power supply - 30 r/l horizontal display mode select signa l l : normal , h : left / right reverse mode i 2) 31 u/d vertical display mode select signa l h : normal , l : up / down reverse mode i 2) 32 nc no connect i 33 ca1 cathode 1 - 34 ca2 cathode 1 - 35 ca3 cathode 1 - 36 ca4 ? cathode 1 - 37 an1 anode 1 - 38 an2 anode 2 - 39 an3 anode 3 - 40 an4 anode 4 - ? ? ? ? lcd connector imsa-9681s-40a-gf (iriso) ? ? ? ? recommended matching ffc or fpc 0.5mm pitch www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1deu57-00 part no. TCG057VGLBL-C50 page 9 m306001 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 1) the horizontal display start timing is settled in accordance with a rising timing of enab signal. in case enab is fixed "low", the horizontal start timing is determined. don't keep enab "high" during operation. 2) r/l = l r/l = h u/d = h u/d = h r/l = l r/l = h u/d = l u/d = l 7-2. touch panel no. symbol description 1 yl y-lower terminal 2 xl x-left terminal 3 yu y-upper terminal 4 xr x-right terminal touch panel side connector ? ? ? 1.25mm pitch recommended matching connector 04ffs-sp-gb-tf(lf)(sn) (jst) 00-8370-049-000-888+ ? ? ? ? (elco) www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1deu57-00 part no. TCG057VGLBL-C50 page 10 m306001 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 8. input timing characteristics 8-1. timing characteristics item symbol min typ max unit note frequency 1/tc 22.66 25.18 27.69 mhz clock duty ratio tch/tc 40 50 60 % set up time tds 10 ns data hold time tdh 10 ns 30.0 31.8 s cycle th 770 800 850 clock pulse width thp 5 30 clock set up time ths 10 ns horizontal sync. signal hold time thh 10 ns 515 525 535 line enab=l cycle tv 515 525 560 line with enab pulse width tvp 1 3 5 line set up time tvs 10 ns vertical sync. signal hold time tvh 10 ns pulse width tep 640 clock set up time tes 10 ns enable signal (enab hold time teh 10 ns h sync - enable signal phase difference the 112 144 175 clock 0 4 clock enab=l h sync - v sync signal phase difference thv 10 ns with enab vertical sync. signal start position tve 2 35 76 line horizontal display period thd 640 clock vertical display period tvd 480 line 1) when enab is fixed at "low", the horizontal display starts from the data of c144 (clock) as shown in 8-3. 2) when enab is fixed at "low", the vertical sync. si gnal start position is 35 (line) as shown in 8-3. 3) in case of lower frequency, the deterioration of the display quality, flicker etc., may occur. 8-2. input data signals and display position on the screen ? ? ? ?o ?o ?o ? ? ? ? www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1deu57-00 part no. TCG057VGLBL-C50 page 11 m306001 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 8-3. input timing characteristics 1) when enab is fixed at "low", the horizontal display starts from the data of c144 (clock). ? 2) when enab is fixed at "low", the vertical sync. signal start position is 35 (line). (;( ? 5()3, ?:0.5(3 ? ? e ? 690a65;(3 ?:@5* ? ? ? e ? 7 ? ? : ? */ ? +: ? +/ ? ? ? ? y ? ? ,9;0*(3 ?05=(30+ ?+(;( ?7,906+ ? ? : ? + ? 7 ? 7 ? ? ? ? + ? ? ? ? ? ? ? 36*2 ?:05.(3 ? ? e ? (;( ?:0.5(3 ? ? ? ? ? ? ? e ? (;( ? 5()3, ?:0.5(3 ? ? e ? ,9;0*(3 ?:@5* ? ? :0.5(3 ? ? e ? 690a65;(3 ? @5* ? ?:0.5(3 ? ? e ? (;( ?:0.5(3 ? ? ? ? ? ? ? e ? ,9;0*(3 ?05=(30+ ?+(;( ?7,906+ ? number of h-data |